Package: libnpth0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 34
Maintainer: Eric Dorland <eric@debian.org>
Architecture: armhf
Multi-Arch: same
Source: npth
Version: 1.3-1
Depends: libc6 (>= 2.17)
Description: replacement for GNU Pth using system threads
 nPth is a non-preemptive threads implementation using an API very
 similar to the one known from GNU Pth. It has been designed as a
 replacement of GNU Pth for non-ancient operating systems. In
 contrast to GNU Pth it is based on the system's standard threads
 implementation. Thus nPth allows the use of libraries which are not
 compatible to GNU Pth.
Homepage: https://www.gnupg.org/

Package: iputils-ping
Status: install ok installed
Priority: important
Section: net
Installed-Size: 98
Maintainer: Noah Meyerhans <noahm@debian.org>
Architecture: armhf
Source: iputils
Version: 3:20161105-1
Provides: ping
Depends: libc6 (>= 2.11), libcap2 (>= 1:2.10), libidn11 (>= 1.13), libnettle6
Recommends: libcap2-bin
Description: Tools to test the reachability of network hosts
 The ping command sends ICMP ECHO_REQUEST packets to a host in order to
 test if the host is reachable via the network.
 .
 This package includes a ping6 utility which supports IPv6 network
 connections.

Package: libedit2
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 156
Maintainer: LLVM Packaging Team <pkg-llvm-team@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: same
Source: libedit
Version: 3.1-20160903-3
Depends: libbsd0 (>= 0.0), libc6 (>= 2.17), libncurses5 (>= 6), libtinfo5 (>= 6)
Description: BSD editline and history libraries
 Command line editor library provides generic line editing,
 history, and tokenization functions.
 .
 It slightly resembles GNU readline.
Homepage: http://www.thrysoee.dk/editline/

Package: libpam-runtime
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 1016
Maintainer: Steve Langasek <vorlon@debian.org>
Architecture: all
Multi-Arch: foreign
Source: pam
Version: 1.1.8-3.6
Replaces: libpam0g-dev, libpam0g-util
Depends: debconf (>= 0.5) | debconf-2.0, debconf (>= 1.5.19) | cdebconf, libpam-modules (>= 1.0.1-6)
Conflicts: libpam0g-util
Conffiles:
 /etc/pam.conf 87fc76f18e98ee7d3848f6b81b3391e5
 /etc/pam.d/other 31aa7f2181889ffb00b87df4126d1701
Description: Runtime support for the PAM library
 Contains configuration files and  directories required for
 authentication  to work on Debian systems.  This package is required
 on almost all installations.
Homepage: http://www.linux-pam.org/

Package: vim-tiny
Status: install ok installed
Priority: important
Section: editors
Installed-Size: 706
Maintainer: Debian Vim Maintainers <pkg-vim-maintainers@lists.alioth.debian.org>
Architecture: armhf
Source: vim
Version: 2:8.0.0197-4+deb9u1
Provides: editor
Depends: vim-common (= 2:8.0.0197-4+deb9u1), libacl1 (>= 2.2.51-8), libc6 (>= 2.15), libselinux1 (>= 1.32), libtinfo5 (>= 6)
Suggests: indent
Conffiles:
 /etc/vim/vimrc.tiny 103fa7ce385b40469f20b73473aa866c
Description: Vi IMproved - enhanced vi editor - compact version
 Vim is an almost compatible version of the UNIX editor Vi.
 .
 This package contains a minimal version of Vim compiled with no GUI and
 a small subset of features. This package's sole purpose is to provide
 the vi binary for base installations.
 .
 If a vim binary is wanted, try one of the following more featureful
 packages: vim, vim-nox, vim-athena, vim-gtk, or vim-gtk3.
Homepage: http://www.vim.org/

Package: libncurses5
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 184
Maintainer: Craig Small <csmall@debian.org>
Architecture: armhf
Multi-Arch: same
Source: ncurses
Version: 6.0+20161126-1+deb9u1
Depends: libtinfo5 (= 6.0+20161126-1+deb9u1), libc6 (>= 2.4)
Recommends: libgpm2
Description: shared libraries for terminal handling
 The ncurses library routines are a terminal-independent method of
 updating character screens with reasonable optimization.
 .
 This package contains the shared libraries necessary to run programs
 compiled with ncurses.
Homepage: http://invisible-island.net/ncurses/

Package: libapt-pkg5.0
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 2405
Maintainer: APT Development Team <deity@lists.debian.org>
Architecture: armhf
Multi-Arch: same
Source: apt
Version: 1.4.8
Provides: libapt-pkg (= 1.4.8)
Depends: libbz2-1.0, libc6 (>= 2.15), libgcc1 (>= 1:3.5), liblz4-1 (>= 0.0~r127), liblzma5 (>= 5.1.1alpha+20120614), libstdc++6 (>= 5.2), zlib1g (>= 1:1.2.3.4)
Recommends: apt (>= 1.4.8)
Breaks: appstream (<< 0.9.0-3~), apt (<< 1.1~exp14), libapt-inst1.5 (<< 0.9.9~)
Description: package management runtime library
 This library provides the common functionality for searching and
 managing packages as well as information about packages.
 Higher-level package managers can depend upon this library.
 .
 This includes:
  * retrieval of information about packages from multiple sources
  * retrieval of packages and all dependent packages
    needed to satisfy a request either through an internal
    solver or by interfacing with an external one
  * authenticating the sources and validating the retrieved data
  * installation and removal of packages in the system
  * providing different transports to retrieve data over cdrom, ftp,
    http, rsh as well as an interface to add more transports like
    https (apt-transport-https) and debtorrent (apt-transport-debtorrent).

Package: libaudit1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 134
Maintainer: Laurent Bigonville <bigon@debian.org>
Architecture: armhf
Multi-Arch: same
Source: audit
Version: 1:2.6.7-2
Depends: libaudit-common (>= 1:2.6.7-2), libc6 (>= 2.8), libcap-ng0
Description: Dynamic library for security auditing
 The audit-libs package contains the dynamic libraries needed for
 applications to use the audit framework. It is used to monitor systems for
 security related events.
Homepage: https://people.redhat.com/sgrubb/audit/

Package: readline-common
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 89
Maintainer: Matthias Klose <doko@debian.org>
Architecture: all
Multi-Arch: foreign
Source: readline
Version: 7.0-3
Replaces: libreadline-common, libreadline4 (<< 4.3-16), libreadline5 (<< 5.0-11)
Depends: dpkg (>= 1.15.4) | install-info
Suggests: readline-doc
Conflicts: libreadline-common, libreadline5 (<< 5.0-11)
Description: GNU readline and history libraries, common files
 The GNU readline library aids in the consistency of user interface
 across discrete programs that need to provide a command line
 interface.
 .
 The GNU history library provides a consistent user interface for
 recalling lines of previously typed input.

Package: ncurses-term
Status: install ok installed
Priority: standard
Section: misc
Installed-Size: 4025
Maintainer: Craig Small <csmall@debian.org>
Architecture: all
Multi-Arch: foreign
Source: ncurses
Version: 6.0+20161126-1+deb9u1
Replaces: bogl-bterm (<< 0.1.18-7), mlterm-common (<< 3.0.2-1), ncurses-base (<< 5.7+20100313-1), suckless-tools (<< 39)
Breaks: bogl-bterm (<< 0.1.18-7), mlterm-common (<< 3.0.2-1), suckless-tools (<< 39)
Description: additional terminal type definitions
 The ncurses library routines are a terminal-independent method of
 updating character screens with reasonable optimization.
 .
 This package contains all of the numerous terminal definitions not found in
 the ncurses-base package.
Homepage: http://invisible-island.net/ncurses/

Package: libtinfo5
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 400
Maintainer: Craig Small <csmall@debian.org>
Architecture: armhf
Multi-Arch: same
Source: ncurses
Version: 6.0+20161126-1+deb9u1
Replaces: libncurses5 (<< 5.9-3)
Depends: libc6 (>= 2.16)
Breaks: dialog (<< 1.2-20130523)
Description: shared low-level terminfo library for terminal handling
 The ncurses library routines are a terminal-independent method of
 updating character screens with reasonable optimization.
 .
 This package contains the shared low-level terminfo library.
Homepage: http://invisible-island.net/ncurses/

Package: libapt-inst2.0
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 453
Maintainer: APT Development Team <deity@lists.debian.org>
Architecture: armhf
Multi-Arch: same
Source: apt
Version: 1.4.8
Provides: libapt-inst (= 1.4.8)
Depends: libapt-pkg5.0 (>= 1.1~exp9), libc6 (>= 2.4), libgcc1 (>= 1:3.5), libstdc++6 (>= 5.2)
Description: deb package format runtime library
 This library provides methods to query and extract information
 from deb packages. This includes the control data and the package
 file content.

Package: libgdbm3
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 59
Maintainer: Debian QA Group <packages@qa.debian.org>
Architecture: armhf
Multi-Arch: same
Source: gdbm
Version: 1.8.3-14
Depends: libc6 (>= 2.4), dpkg (>= 1.15.4) | install-info
Description: GNU dbm database routines (runtime version)
 GNU dbm ('gdbm') is a library of database functions that use extendible
 hashing and works similarly to the standard UNIX 'dbm' functions.
 .
 The basic use of 'gdbm' is to store key/data pairs in a data file, thus
 providing a persistent version of the 'dictionary' Abstract Data Type
 ('hash' to perl programmers).
Homepage: http://directory.fsf.org/project/gdbm/

Package: manpages
Status: install ok installed
Priority: standard
Section: doc
Installed-Size: 1422
Maintainer: Martin Schulze <joey@debian.org>
Architecture: all
Multi-Arch: foreign
Version: 4.10-2
Suggests: man-browser
Description: Manual pages about using a GNU/Linux system
 This package contains GNU/Linux manual pages for these sections:
  4 = Devices (e.g. hd, sd).
  5 = File formats and protocols, syntaxes of several system
      files (e.g. wtmp, /etc/passwd, nfs).
  7 = Conventions and standards, macro packages, etc.
      (e.g. nroff, ascii).
 .
 Sections 1, 6 and 8 are provided by the respective applications. This
 package only includes the intro man page describing the section.
 .
 The man pages describe syntaxes of several system files.
Homepage: http://www.kernel.org/doc/man-pages/

Package: perl-base
Essential: yes
Status: install ok installed
Priority: required
Section: perl
Installed-Size: 6010
Maintainer: Niko Tyni <ntyni@debian.org>
Architecture: armhf
Source: perl
Version: 5.24.1-3+deb9u2
Replaces: libfile-path-perl (<< 2.12.01), libfile-temp-perl (<< 0.2304), libio-socket-ip-perl (<< 0.37), libscalar-list-utils-perl (<< 1:1.42.02), libsocket-perl (<< 2.020.03), libxsloader-perl (<< 0.22), perl (<< 5.10.1-12), perl-modules (<< 5.20.1-3)
Provides: libfile-path-perl, libfile-temp-perl, libio-socket-ip-perl, libscalar-list-utils-perl, libsocket-perl, libxsloader-perl, perlapi-5.24.1
Pre-Depends: libc6 (>= 2.23), dpkg (>= 1.17.17)
Suggests: perl
Breaks: amanda-common (<< 1:3.3.9-2), autoconf2.13 (<< 2.13-45), backuppc (<< 3.3.1-2), dh-haskell (<< 0.3), libalien-wxwidgets-perl (<< 0.65+dfsg-2), libanyevent-perl (<< 7.070-2), libcommon-sense-perl (<< 3.72-2~), libexception-class-perl (<< 1.42), libfile-path-perl (<< 2.12.01), libfile-spec-perl (<< 3.6301), libfile-temp-perl (<< 0.2304), libgtk2-perl-doc (<< 2:1.2491-4), libio-socket-ip-perl (<< 0.37), libjcode-perl (<< 2.13-3), libmarc-charset-perl (<< 1.2), libsbuild-perl (<< 0.67.0-1), libscalar-list-utils-perl (<< 1:1.42.02), libsocket-perl (<< 2.020.03), libxsloader-perl (<< 0.22), mailagent (<< 1:3.1-81-2), pdl (<< 1:2.007-4), perl (<< 5.24.1~), perl-modules (<< 5.24.1~), texinfo (<< 6.1.0.dfsg.1-8)
Conflicts: defoma (<< 0.11.12), doc-base (<< 0.10.3), mono-gac (<< 2.10.8.1-3), safe-rm (<< 0.8), update-inetd (<< 4.41)
Description: minimal Perl system
 Perl is a scripting language used in many system scripts and utilities.
 .
 This package provides a Perl interpreter and the small subset of the
 standard run-time library required to perform basic tasks. For a full
 Perl installation, install "perl" (and its dependencies, "perl-modules-5.24"
 and "perl-doc").
Homepage: http://dev.perl.org/perl5/

Package: libudev1
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 180
Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: same
Source: systemd
Version: 232-25+deb9u1
Depends: libc6 (>= 2.16), libgcc1 (>= 1:3.5)
Description: libudev shared library
 This library provides access to udev device information.
Homepage: https://www.freedesktop.org/wiki/Software/systemd

Package: libxtables10
Status: install ok installed
Priority: important
Section: net
Installed-Size: 122
Maintainer: Laurence J. Lane <ljlane@debian.org>
Architecture: armhf
Source: iptables (1.4.21-2)
Version: 1.4.21-2+b1
Replaces: iptables (<< 1.4.16.3-3)
Depends: libc6 (>= 2.7)
Breaks: iptables (<< 1.4.16.3-3)
Description: netfilter xtables library
 The user-space interface to the Netfilter xtables kernel framework.
Homepage: http://www.netfilter.org/

Package: libnettle6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 325
Maintainer: Magnus Holmgren <holmgren@debian.org>
Architecture: armhf
Multi-Arch: same
Source: nettle (3.3-1)
Version: 3.3-1+b2
Depends: libc6 (>= 2.4)
Description: low level cryptographic library (symmetric and one-way cryptos)
 Nettle is a cryptographic library that is designed to fit easily in more or
 less any context: In crypto toolkits for object-oriented languages (C++,
 Python, Pike, ...), in applications like LSH or GNUPG, or even in kernel
 space.
 .
 It tries to solve a problem of providing a common set of cryptographic
 algorithms for higher-level applications by implementing a
 context-independent set of cryptographic algorithms. In that light, Nettle
 doesn't do any memory allocation or I/O, it simply provides the
 cryptographic algorithms for the application to use in any environment and
 in any way it needs.
 .
 This package contains the symmetric and one-way cryptographic
 algorithms. To avoid having this package depend on libgmp, the
 asymmetric cryptos reside in a separate library, libhogweed.
Homepage: http://www.lysator.liu.se/~nisse/nettle/

Package: cpio
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 649
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: armhf
Multi-Arch: foreign
Version: 2.11+dfsg-6
Replaces: cpio-mt
Depends: libc6 (>= 2.17)
Suggests: libarchive1
Conflicts: cpio-mt, mt-st (<< 0.6)
Description: GNU cpio -- a program to manage archives of files
 GNU cpio is a tool for creating and extracting archives, or copying
 files from one place to another.  It handles a number of cpio formats
 as well as reading and writing tar files.
Homepage: http://www.gnu.org/software/cpio/

Package: libpopt0
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 207
Maintainer: Paul Martin <pm@debian.org>
Architecture: armhf
Multi-Arch: same
Source: popt (1.16-10)
Version: 1.16-10+b2
Replaces: popt
Depends: libc6 (>= 2.17)
Conflicts: libpopt-dev (<= 1.4-1), popt, rpm (<= 4.0.2-3)
Description: lib for parsing cmdline parameters
 Popt was heavily influenced by the getopt() and getopt_long() functions,
 but it allows more powerful argument expansion. It can parse arbitrary
 argv[] style arrays and automatically set variables based on command
 line arguments. It also allows command line arguments to be aliased via
 configuration files and includes utility functions for parsing arbitrary
 strings into argv[] arrays using shell-like rules.
 .
 This package contains the runtime library and locale data.
Homepage: http://rpm5.org/

Package: kmod
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 171
Maintainer: Marco d'Itri <md@linux.it>
Architecture: armhf
Multi-Arch: foreign
Version: 23-2
Depends: libc6 (>= 2.17), libkmod2 (= 23-2), lsb-base
Breaks: alsa-base (<= 1.0.25+3), oss-compat (= 4)
Conffiles:
 /etc/init.d/kmod 82698019c962069b438bd2a82d9fa1e7
Description: tools for managing Linux kernel modules
 This package contains a set of programs for loading, inserting, and
 removing kernel modules for Linux.
 It replaces module-init-tools.

Package: libattr1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 37
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: armhf
Multi-Arch: same
Source: attr (1:2.4.47-2)
Version: 1:2.4.47-2+b2
Depends: libc6 (>= 2.4)
Conflicts: attr (<< 2.0.0)
Description: Extended attribute shared library
 Contains the runtime environment required by programs that make use
 of extended attributes.
Homepage: http://savannah.nongnu.org/projects/attr/

Package: libk5crypto3
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 258
Maintainer: Sam Hartman <hartmans@debian.org>
Architecture: armhf
Multi-Arch: same
Source: krb5
Version: 1.15-1+deb9u1
Depends: libc6 (>= 2.4), libkeyutils1 (>= 1.4), libkrb5support0 (>= 1.15~beta1)
Suggests: krb5-doc, krb5-user
Breaks: libgssapi-krb5-2 (<= 1.10+dfsg~alpha1), libkrb5-3 (<= 1.8~aa)
Description: MIT Kerberos runtime libraries - Crypto Library
 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service.  That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains the runtime cryptography libraries used by
 applications and Kerberos clients.
Homepage: http://web.mit.edu/kerberos/

Package: libss2
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 87
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Architecture: armhf
Multi-Arch: same
Source: e2fsprogs
Version: 1.43.4-2
Replaces: e2fsprogs (<< 1.34-1)
Depends: libcomerr2, libc6 (>= 2.17)
Description: command-line interface parsing library
 libss provides a simple command-line interface parser which will
 accept input from the user, parse the command into an argv argument
 vector, and then dispatch it to a handler function.
 .
 It was originally inspired by the Multics SubSystem library.
Homepage: http://e2fsprogs.sourceforge.net

Package: liblockfile-bin
Status: install ok installed
Priority: standard
Section: utils
Installed-Size: 40
Maintainer: Miquel van Smoorenburg <miquels@cistron.nl>
Architecture: armhf
Multi-Arch: foreign
Source: liblockfile (1.14-1)
Version: 1.14-1+b1
Replaces: liblockfile1 (<< 1.09-1)
Depends: libc6 (>= 2.4)
Breaks: liblockfile1 (<< 1.09-1)
Description: support binaries for and cli utilities based on liblockfile
 This package contains support binaries for the liblockfile library,
 and the command-line utility ``dotlockfile''.

Package: nfacct
Status: install ok installed
Priority: extra
Section: net
Installed-Size: 25
Maintainer: Laurence J. Lane <ljlane@debian.org>
Architecture: armhf
Source: nfacct (1.0.1-1.1)
Version: 1.0.1-1.1+b1
Depends: libc6 (>= 2.7), libmnl0 (>= 1.0.3-4~), libnetfilter-acct1
Description: netfilter accounting object tool
 This is the command line tool to create/retrieve/delete
 netfilter accounting objects.
 .
 Requires Linux kernel 3.3+ nfnetlink_acct subsystem.
Homepage: http://netfilter.org/projects/nfacct/

Package: libestr0
Status: install ok installed
Priority: extra
Section: libs
Installed-Size: 27
Maintainer: Pierre Chifflier <pollux@debian.org>
Architecture: armhf
Source: libestr
Version: 0.1.10-2
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Description: Helper functions for handling strings (lib)
 The 'libestr' library contains some essential string manipulation
 functions and more, like escaping special characters.
 .
 This package contains the shared library.
Homepage: http://libestr.sourceforge.net/

Package: libexpat1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 223
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: armhf
Multi-Arch: same
Source: expat
Version: 2.2.0-2+deb9u1
Depends: libc6 (>= 2.4), libgcc1 (>= 1:3.5)
Conflicts: wink (<= 1.5.1060-4)
Description: XML parsing C library - runtime library
 This package contains the runtime, shared library of expat, the C
 library for parsing XML. Expat is a stream-oriented parser in
 which an application registers handlers for things the parser
 might find in the XML document (like start tags).
Homepage: http://expat.sourceforge.net

Package: less
Status: install ok installed
Priority: important
Section: text
Installed-Size: 221
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: armhf
Multi-Arch: foreign
Version: 481-2.1
Depends: libc6 (>= 2.11), libtinfo5 (>= 6), debianutils (>= 1.8)
Description: pager program similar to more
 This package provides "less", a file pager (that is, a memory-efficient
 utility for displaying text one screenful at a time). Less has many
 more features than the basic pager "more". As part of the GNU project,
 it is widely regarded as the standard pager on UNIX-derived systems.
 .
 Also provided are "lessecho", a simple utility for ensuring arguments
 with spaces are correctly quoted; "lesskey", a tool for modifying the
 standard (vi-like) keybindings; and "lesspipe", a filter for specific
 types of input, such as .doc or .txt.gz files.
Homepage: http://www.greenwoodsoftware.com/less/

Package: liblzma5
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 290
Maintainer: Jonathan Nieder <jrnieder@gmail.com>
Architecture: armhf
Multi-Arch: same
Source: xz-utils (5.2.2-1.2)
Version: 5.2.2-1.2+b1
Depends: libc6 (>= 2.17)
Description: XZ-format compression library
 XZ is the successor to the Lempel-Ziv/Markov-chain Algorithm
 compression format, which provides memory-hungry but powerful
 compression (often better than bzip2) and fast, easy decompression.
 .
 The native format of liblzma is XZ; it also supports raw (headerless)
 streams and the older LZMA format used by lzma. (For 7-Zip's related
 format, use the p7zip package instead.)
Homepage: http://tukaani.org/xz/

Package: gcc-4.8-base
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 212
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: armhf
Multi-Arch: same
Source: gcc-4.8
Version: 4.8.4-1
Breaks: dehydra (<= 0.9.hg20110609-2), gcc-4.4-base (<< 4.4.7), gcc-4.7-base (<< 4.7.3), gcj-4.4-base (<< 4.4.6-9~), gcj-4.6-base (<< 4.6.1-4~), gnat-4.4-base (<< 4.4.6-3~), gnat-4.6 (<< 4.6.1-5~)
Description: GCC, the GNU Compiler Collection (base package)
 This package contains files common to all languages and libraries
 contained in the GNU Compiler Collection (GCC).
Homepage: http://gcc.gnu.org/

Package: libidn2-0
Status: install ok installed
Priority: extra
Section: libs
Installed-Size: 170
Maintainer: Debian Libidn team <help-libidn@gnu.org>
Architecture: armhf
Multi-Arch: same
Version: 0.16-1+deb9u1
Depends: libc6 (>= 2.4), libunistring0
Description: Internationalized domain names (IDNA2008) library
 Libidn2 implements the revised algorithm for internationalized domain
 names called IDNA2008.
 .
 This package contains runtime libraries.
Homepage: https://www.gnu.org/software/libidn/#libidn2

Package: libnetfilter-conntrack3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 81
Maintainer: Alexander Wirt <formorer@debian.org>
Architecture: armhf
Multi-Arch: same
Source: libnetfilter-conntrack
Version: 1.0.6-2
Depends: libc6 (>= 2.4), libmnl0 (>= 1.0.3-4~), libnfnetlink0
Description: Netfilter netlink-conntrack library
 libnetfilter_conntrack is a userspace library providing a programming
 interface (API) to the in-kernel connection tracking state table.
Homepage: http://www.netfilter.org/projects/libnetfilter_conntrack/

Package: libpam-systemd
Status: install ok installed
Priority: standard
Section: admin
Installed-Size: 274
Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: same
Source: systemd
Version: 232-25+deb9u1
Depends: libc6 (>= 2.17), libgcc1 (>= 1:3.5), libpam0g (>= 0.99.7.1), libselinux1 (>= 2.1.9), systemd (= 232-25+deb9u1), libpam-runtime (>= 1.0.1-6), dbus, systemd-shim (>= 10-3~) | systemd-sysv
Description: system and service manager - PAM module
 This package contains the PAM module which registers user sessions in
 the systemd control group hierarchy for logind.
 .
 If in doubt, do install this package.
 .
 Packages that depend on logind functionality need to depend on libpam-systemd.
Homepage: https://www.freedesktop.org/wiki/Software/systemd

Package: libhogweed2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 154
Maintainer: Magnus Holmgren <holmgren@debian.org>
Architecture: armhf
Multi-Arch: same
Source: nettle
Version: 2.7.1-5+deb8u1
Depends: libc6 (>= 2.4), libgmp10 (>= 2:6.0.0), libnettle4 (= 2.7.1-5+deb8u1)
Pre-Depends: multiarch-support
Description: low level cryptographic library (public-key cryptos)
 Nettle is a cryptographic library that is designed to fit easily in more or
 less any context: In crypto toolkits for object-oriented languages (C++,
 Python, Pike, ...), in applications like LSH or GNUPG, or even in kernel
 space.
 .
 It tries to solve a problem of providing a common set of cryptographic
 algorithms for higher-level applications by implementing a
 context-independent set of cryptographic algorithms. In that light, Nettle
 doesn't do any memory allocation or I/O, it simply provides the
 cryptographic algorithms for the application to use in any environment and
 in any way it needs.
 .
 This package contains the asymmetric cryptographic algorithms, which,
 require the GNU multiple precision arithmetic library (libgmp) for
 their large integer computations.
Homepage: http://www.lysator.liu.se/~nisse/nettle/

Package: libpam-modules-bin
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 186
Maintainer: Steve Langasek <vorlon@debian.org>
Architecture: armhf
Multi-Arch: foreign
Source: pam
Version: 1.1.8-3.6
Replaces: libpam-modules (<< 1.1.3-8)
Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.4), libpam0g (>= 0.99.7.1), libselinux1 (>= 1.32)
Description: Pluggable Authentication Modules for PAM - helper binaries
 This package contains helper binaries used by the standard set of PAM
 modules in the libpam-modules package.
Homepage: http://www.linux-pam.org/

Package: libip4tc0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 101
Maintainer: Arturo Borrero Gonzalez <arturo@debian.org>
Architecture: armhf
Multi-Arch: same
Source: iptables
Version: 1.6.0+snapshot20161117-6
Depends: libc6 (>= 2.4)
Description: netfilter libip4tc library
 The user-space iptables (IPv4) C library from the Netfilter xtables framework.
 .
 iptables IPv4 ruleset ADT and kernel interface.
 .
 This library has been considered private for years (and still is), in the
 sense of changing symbols and backward compatibility not guaranteed.
Homepage: http://www.netfilter.org/

Package: grep
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 1054
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: armhf
Multi-Arch: foreign
Version: 2.27-2
Provides: rgrep
Depends: dpkg (>= 1.15.4) | install-info
Pre-Depends: libc6 (>= 2.5), libpcre3
Suggests: libpcre3 (>= 7.7)
Conflicts: rgrep
Description: GNU grep, egrep and fgrep
 'grep' is a utility to search for text in files; it can be used from the
 command line or in scripts.  Even if you don't want to use it, other packages
 on your system probably will.
 .
 The GNU family of grep utilities may be the "fastest grep in the west".
 GNU grep is based on a fast lazy-state deterministic matcher (about
 twice as fast as stock Unix egrep) hybridized with a Boyer-Moore-Gosper
 search for a fixed string that eliminates impossible text from being
 considered by the full regexp matcher without necessarily having to
 look at every character. The result is typically many times faster
 than Unix grep or egrep. (Regular expressions containing backreferencing
 will run more slowly, however.)
Homepage: http://www.gnu.org/software/grep/

Package: ifupdown
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 173
Maintainer: Guus Sliepen <guus@debian.org>
Architecture: armhf
Multi-Arch: foreign
Version: 0.8.19
Replaces: systemd (<< 228-3~)
Depends: libc6 (>= 2.8), init-system-helpers (>= 1.18~), lsb-base, adduser, iproute2
Recommends: isc-dhcp-client | dhcp-client
Suggests: ppp, rdnssd
Breaks: systemd (<< 228-3~)
Conffiles:
 /etc/default/networking 35cd4a2713981c9239ce4532c1bfc1c7
 /etc/init.d/networking 27013efdfe13470845c70a9e00a61fde
 /etc/init/network-interface-container.conf 4daa570594afc50940f140a7731d20d1
 /etc/init/network-interface-security.conf feb6b4b52fe24c44ff1bc68addf245d6
 /etc/init/network-interface.conf aae12345eba8e946579b06798b1752c1
 /etc/init/networking.conf c50811e19bcd596d99b0467b40cfbb8b
 /etc/network/if-down.d/upstart 1a0205ddbc1446782a8d4d818e97d8a5
 /etc/network/if-up.d/upstart dfbcde4fd4a3a2553930605e03e160ab
Description: high level tools to configure network interfaces
 This package provides the tools ifup and ifdown which may be used to
 configure (or, respectively, deconfigure) network interfaces based on
 interface definitions in the file /etc/network/interfaces.

Package: psmisc
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 564
Maintainer: Craig Small <csmall@debian.org>
Architecture: armhf
Multi-Arch: foreign
Source: psmisc (22.21-2.1)
Version: 22.21-2.1+b2
Replaces: procps (<< 1:1.2)
Depends: libc6 (>= 2.8), libselinux1 (>= 1.32), libtinfo5 (>= 6)
Description: utilities that use the proc file system
 This package contains miscellaneous utilities that use the proc FS:
 .
  - fuser: identifies processes that are using files or sockets.
  - killall: kills processes by name (e.g. "killall -HUP named").
  - peekfd: shows the data traveling over a file descriptor.
  - pstree: shows currently running processes as a tree.
  - prtstat: print the contents of /proc/<pid>/stat
Homepage: http://psmisc.sf.net/

Package: libssl1.0.0
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 1852
Maintainer: Debian OpenSSL Team <pkg-openssl-devel@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: same
Source: openssl
Version: 1.0.1k-3+deb8u4
Depends: libc6 (>= 2.11), debconf (>= 0.5) | debconf-2.0
Pre-Depends: multiarch-support
Description: Secure Sockets Layer toolkit - shared libraries
 This package is part of the OpenSSL project's implementation of the SSL
 and TLS cryptographic protocols for secure communication over the
 Internet.
 .
 It provides the libssl and libcrypto shared libraries.

Package: base-passwd
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 220
Maintainer: Colin Watson <cjwatson@debian.org>
Architecture: armhf
Multi-Arch: foreign
Version: 3.5.43
Replaces: base
Depends: libc6 (>= 2.8), libdebconfclient0 (>= 0.145)
Recommends: debconf (>= 0.5) | debconf-2.0
Description: Debian base system master password and group files
 These are the canonical master copies of the user database files
 (/etc/passwd and /etc/group), containing the Debian-allocated user and
 group IDs. The update-passwd tool is provided to keep the system databases
 synchronized with these master files.

Package: libisc-export160
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 466
Maintainer: LaMont Jones <lamont@debian.org>
Architecture: armhf
Source: bind9
Version: 1:9.10.3.dfsg.P4-12.3+deb9u3
Depends: libc6 (>= 2.4)
Description: Exported ISC Shared Library
 The Berkeley Internet Name Domain (BIND) implements an Internet domain
 name server.  BIND is the most widely-used name server software on the
 Internet, and is supported by the Internet Software Consortium, www.isc.org.
 .
 This package delivers the exported libisc shared library.

Package: libisccfg-export90
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 57
Maintainer: LaMont Jones <lamont@debian.org>
Architecture: armhf
Source: bind9
Version: 1:9.9.5.dfsg-9+deb8u6
Depends: libc6 (>= 2.4), libisc-export95
Pre-Depends: multiarch-support
Description: Exported ISC CFG Shared Library
 The Berkeley Internet Name Domain (BIND) implements an Internet domain
 name server.  BIND is the most widely-used name server software on the
 Internet, and is supported by the Internet Software Consortium, www.isc.org.
 .
 This package delivers the exported libisccfg shared library.

Package: e2fslibs
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 335
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Architecture: armhf
Multi-Arch: same
Source: e2fsprogs
Version: 1.43.4-2
Replaces: e2fsprogs (<< 1.34-1)
Provides: libe2p2, libext2fs2
Depends: libc6 (>= 2.17)
Description: ext2/ext3/ext4 file system libraries
 The ext2, ext3 and ext4 file systems are successors of the original ext
 ("extended") file system. They are the main file system types used for
 hard disks on Debian and other Linux systems.
 .
 This package provides the ext2fs and e2p libraries, for userspace software
 that directly accesses extended file systems. Programs that use libext2fs
 include e2fsck, mke2fs, and tune2fs. Programs that use libe2p include
 dumpe2fs, chattr, and lsattr.
Homepage: http://e2fsprogs.sourceforge.net

Package: liblz4-1
Status: install ok installed
Priority: extra
Section: libs
Installed-Size: 68
Maintainer: Nobuhiro Iwamatsu <iwamatsu@debian.org>
Architecture: armhf
Multi-Arch: same
Source: lz4 (0.0~r131-2)
Version: 0.0~r131-2+b1
Depends: libc6 (>= 2.4)
Description: Fast LZ compression algorithm library - runtime
 LZ4 is a very fast lossless compression algorithm, providing compression speed
 at 400 MB/s per core, scalable with multi-cores CPU. It also features an
 extremely fast decoder, with speed in multiple GB/s per core, typically
 reaching RAM speed limits on multi-core systems.
 .
 This package includes the shared library.
Homepage: https://github.com/Cyan4973/lz4

Package: libxext6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 95
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: armhf
Multi-Arch: same
Source: libxext (2:1.3.3-1)
Version: 2:1.3.3-1+b2
Depends: libc6 (>= 2.4), libx11-6 (>= 2:1.6.0)
Description: X11 miscellaneous extension library
 libXext provides an X Window System client interface to several extensions to
 the X protocol.
 .
 The supported protocol extensions are:
  - DOUBLE-BUFFER (DBE), the Double Buffer extension;
  - DPMS, the VESA Display Power Management System extension;
  - Extended-Visual-Information (EVI), an extension for gathering extra
    information about the X server's visuals;
  - LBX, the Low Bandwidth X extension;
  - MIT-SHM, the MIT X client/server shared memory extension;
  - MIT-SUNDRY-NONSTANDARD, a miscellaneous extension by MIT;
  - Multi-Buffering, the multi-buffering and stereo display extension;
  - SECURITY, the X security extension;
  - SHAPE, the non-rectangular shaped window extension;
  - SYNC, the X synchronization extension;
  - TOG-CUP, the Open Group's Colormap Utilization extension;
  - XC-APPGROUP, the X Consortium's Application Group extension;
  - XC-MISC, the X Consortium's resource ID querying extension;
  - XTEST, the X test extension (this is one of two client-side
    implementations; the other is in the libXtst library, provided by the
    libxtst6 package);
 .
 libXext also provides a small set of utility functions to aid authors of
 client APIs for X protocol extensions.
 .
 More information about X.Org can be found at:
 <URL:http://www.X.org>
 .
 This module can be found at
 git://anongit.freedesktop.org/git/xorg/lib/libXext

Package: exim4-config
Status: install ok installed
Priority: standard
Section: mail
Installed-Size: 976
Maintainer: Exim4 Maintainers <pkg-exim4-maintainers@lists.alioth.debian.org>
Architecture: all
Source: exim4
Version: 4.89-2+deb9u2
Provides: exim4-config-2
Depends: debconf (>= 0.5) | debconf-2.0, adduser
Breaks: exim4-daemon-heavy (<< 4.87~RC5), exim4-daemon-light (<< 4.87~RC5)
Conflicts: courier-mta, esmtp-run, exim, exim-tls, exim4-config, exim4-config-2, hula-mta, masqmail, mta-dummy, nullmailer, postfix, sendmail-bin, smail, ssmtp, xmail, zmailer
Conffiles:
 /etc/email-addresses 6bea09fbb18e4676012105fa5fc726c6
 /etc/exim4/conf.d/acl/00_exim4-config_header e572a7b9954b20950242db2a92b35044
 /etc/exim4/conf.d/acl/20_exim4-config_local_deny_exceptions 516070107501d48a3106d755cb199e95
 /etc/exim4/conf.d/acl/30_exim4-config_check_mail bbe4979288d9cd20868d13ca01e6bfc3
 /etc/exim4/conf.d/acl/30_exim4-config_check_rcpt 24f0ff50be45fc11de0fe2114298b6cf
 /etc/exim4/conf.d/acl/40_exim4-config_check_data bcecb05fac71f4acda4a7daa3f8ca882
 /etc/exim4/conf.d/auth/00_exim4-config_header d0ee6ea0b33d9796573bb024ffca20d4
 /etc/exim4/conf.d/auth/30_exim4-config_examples 9085a3577416c654a12ee7e387c110c8
 /etc/exim4/conf.d/main/01_exim4-config_listmacrosdefs 9f095352d7ed4bddc0c4ec35a125af18
 /etc/exim4/conf.d/main/02_exim4-config_options 859a7594eb91cb2ad2161ebc34acf57f
 /etc/exim4/conf.d/main/03_exim4-config_tlsoptions 7f94935f13cef06820b9096a533a514e
 /etc/exim4/conf.d/main/90_exim4-config_log_selector 888348df8f7bd25a0a77d3c05e8fffe3
 /etc/exim4/conf.d/retry/00_exim4-config_header 309f5bf0859ad91e03c5402d6afe6895
 /etc/exim4/conf.d/retry/30_exim4-config d45d612ffd0ce651fab5e953d61f7524
 /etc/exim4/conf.d/rewrite/00_exim4-config_header d98361da23f34490d191bf2280728dec
 /etc/exim4/conf.d/rewrite/31_exim4-config_rewriting a293d4c1007ffc86ff1124c84c998f01
 /etc/exim4/conf.d/router/00_exim4-config_header c0ecc395e9a49487b484126cac4d9559
 /etc/exim4/conf.d/router/100_exim4-config_domain_literal d0184d959778b1bb20155912b583d362
 /etc/exim4/conf.d/router/150_exim4-config_hubbed_hosts 1d4a3bab1738f10f931b73ad60c7bb8d
 /etc/exim4/conf.d/router/200_exim4-config_primary 29f98f21437e2dfa2c2458b5aa8a04ce
 /etc/exim4/conf.d/router/300_exim4-config_real_local 07c6277988b181918f790ffe68c245da
 /etc/exim4/conf.d/router/400_exim4-config_system_aliases 7dc0cee575163f1d9761f1cf317f8299
 /etc/exim4/conf.d/router/500_exim4-config_hubuser bbc413dcaa4a7fc3cb5c75d3591fac27
 /etc/exim4/conf.d/router/600_exim4-config_userforward 2c63dff568fb6c984c5e4aa3d8142cd8
 /etc/exim4/conf.d/router/700_exim4-config_procmail 28ddff8000ba5577c60eed8fabb520b4
 /etc/exim4/conf.d/router/800_exim4-config_maildrop ba547442939aa9f57b541d7320aed321
 /etc/exim4/conf.d/router/850_exim4-config_lowuid 52dc089e083a3f5b0bda6af1c6bc48d7
 /etc/exim4/conf.d/router/900_exim4-config_local_user 20c8ced8346125170242584e575a95ff
 /etc/exim4/conf.d/router/mmm_mail4root 8a16022dfc39cae4f508dfab20a8f760
 /etc/exim4/conf.d/transport/00_exim4-config_header 9568ac286553a79b8447c9060fed7798
 /etc/exim4/conf.d/transport/10_exim4-config_transport-macros 75631733cbe02d61113e323e9c2476c7
 /etc/exim4/conf.d/transport/30_exim4-config_address_file fe97ddf4165820356e90c05fa744f796
 /etc/exim4/conf.d/transport/30_exim4-config_address_pipe dfcd9d71f1bb4c55ac29cccead29117e
 /etc/exim4/conf.d/transport/30_exim4-config_address_reply 9145131105953b0125a228ab9b7c6500
 /etc/exim4/conf.d/transport/30_exim4-config_mail_spool a0f0997e4f06f38afdae0ee79759dfea
 /etc/exim4/conf.d/transport/30_exim4-config_maildir_home 3edfd11b8e9a8919a9a14cbc24637d68
 /etc/exim4/conf.d/transport/30_exim4-config_maildrop_pipe c9f289c2504ed26493f3050190b44ad7
 /etc/exim4/conf.d/transport/30_exim4-config_procmail_pipe 82379d31ca4bf60d9667f408cb55dbbf
 /etc/exim4/conf.d/transport/30_exim4-config_remote_smtp 6cdd2b481ab89d1eb9a49e4933e15baa
 /etc/exim4/conf.d/transport/30_exim4-config_remote_smtp_smarthost 39e490f84c9e7eb5bc247c5bbf200004
 /etc/exim4/conf.d/transport/35_exim4-config_address_directory c2a777e8db8fac4f83c2da0c95952598
 /etc/exim4/exim4.conf.template e0a940c5b8073693e93165f083d66255
 /etc/exim4/passwd.client 4b0013712a87d147c8303fa761e3c771
 /etc/ppp/ip-up.d/exim4 5f4b9cb6696117b19b32aaa8fa7a6de2
Description: configuration for the Exim MTA (v4)
 Exim (v4) is a mail transport agent. exim4-config provides the configuration
 for the exim4 daemon packages. The configuration framework has been split
 off the main package to allow sites to replace the configuration scheme
 with their own without having to change the actual exim4 packages.
 .
 Sites with special configuration needs (having a lot of identically
 configured machines for example) can use this to distribute their own
 custom configuration via the packaging system, using the magic
 available with dpkg's conffile handling, without having to do local
 changes on all of these machines.
 .
 The Debian exim4 packages have their own web page,
 http://wiki.debian.org/PkgExim4. There is also a Debian-specific
 FAQ list. Information about the way the Debian packages are
 configured can be found in
 /usr/share/doc/exim4-base/README.Debian.gz, which additionally contains
 information about the way the Debian binary packages are built. The
 very extensive upstream documentation is shipped in
 /usr/share/doc/exim4-base/spec.txt.gz. To repeat the debconf-driven
 configuration process in a standard setup, invoke dpkg-reconfigure
 exim4-config. There is a Debian-centered mailing list,
 pkg-exim4-users@lists.alioth.debian.org. Please ask Debian-specific
 questions there, and only write to the upstream exim-users mailing
 list if you are sure that your question is not Debian-specific. You
 can find the subscription web page on
 http://lists.alioth.debian.org/mailman/listinfo/pkg-exim4-users
Homepage: http://www.exim.org/

Package: debianutils
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 202
Maintainer: Clint Adams <clint@debian.org>
Architecture: armhf
Multi-Arch: foreign
Version: 4.8.1.1
Replaces: manpages-pl (<< 1:0.5)
Depends: sensible-utils
Pre-Depends: libc6 (>= 2.15)
Description: Miscellaneous utilities specific to Debian
 This package provides a number of small utilities which are used
 primarily by the installation scripts of Debian packages, although
 you may use them directly.
 .
 The specific utilities included are:
 add-shell installkernel ischroot remove-shell run-parts savelog
 tempfile which

Package: fake-hwclock
Status: install ok installed
Priority: extra
Section: admin
Installed-Size: 32
Maintainer: Steve McIntyre <93sam@debian.org>
Architecture: all
Version: 0.11
Depends: init-system-helpers (>= 1.18~)
Suggests: cron | cron-daemon, ntp
Conffiles:
 /etc/cron.hourly/fake-hwclock f390eb8cf4180ac2f1518027707d6b27
 /etc/default/fake-hwclock a8ec74297d61f68ac54e933c8f98d335
 /etc/init.d/fake-hwclock 6ed42ea93d6c122ced6449157c977674
Description: Save/restore system clock on machines without working RTC hardware
 Some machines don't have a working realtime clock (RTC) unit, or no
 driver for the hardware that does exist. fake-hwclock is a simple set
 of scripts to save the kernel's current clock periodically (including
 at shutdown) and restore it at boot so that the system clock keeps at
 least close to realtime. This will stop some of the problems that may
 be caused by a system believing it has travelled in time back to
 1970, such as needing to perform filesystem checks at every boot.
 .
 On top of this, use of NTP is still recommended to deal with the fake
 clock "drifting" while the hardware is halted or rebooting.

Package: libsigc++-2.0-0c2a
Status: deinstall ok config-files
Priority: optional
Section: libs
Installed-Size: 99
Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: same
Source: libsigc++-2.0
Version: 2.4.0-1
Config-Version: 2.4.0-1
Depends: libc6 (>= 2.4), libgcc1 (>= 1:4.4.0), libstdc++6 (>= 4.6)
Pre-Depends: multiarch-support
Description: type-safe Signal Framework for C++ - runtime
 This library implements a full callback system for use in widget
 libraries, abstract interfaces, and general programming. It provides
 the ability to connect an abstract callback to a class method,
 function, or function object, and contains adaptor classes for the
 connection of dissimilar callbacks.
 .
 These are the runtime files for libsigc++, needed only if you wish to
 run software which depends on it.

Package: libgcrypt20
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 798
Maintainer: Debian GnuTLS Maintainers <pkg-gnutls-maint@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: same
Version: 1.7.6-2+deb9u2
Depends: libc6 (>= 2.15), libgpg-error0 (>= 1.14)
Suggests: rng-tools
Description: LGPL Crypto library - runtime library
 libgcrypt contains cryptographic functions.  Many important free
 ciphers, hash algorithms and public key signing algorithms have been
 implemented:
 .
 Arcfour, Blowfish, CAST5, DES, AES, Twofish, Serpent, rfc2268 (rc2), SEED,
 Poly1305, Camellia, ChaCha20, IDEA, Salsa, CRC, MD2, MD4, MD5, RIPE-MD160,
 SHA-1, SHA-256, SHA-512, SHA3-224, SHA3-256, SHA3-384, SHA3-512, SHAKE128,
 SHAKE256 Tiger, Whirlpool, DSA, DSA2, ElGamal, RSA, ECC (Curve25519,
 sec256k1, GOST R 34.10-2001 and GOST R 34.10-2012, etc.)
Homepage: http://directory.fsf.org/project/libgcrypt/

Package: xxd
Status: install ok installed
Priority: extra
Section: editors
Installed-Size: 162
Maintainer: Debian Vim Maintainers <pkg-vim-maintainers@lists.alioth.debian.org>
Architecture: armhf
Source: vim
Version: 2:8.0.0197-4+deb9u1
Replaces: vim-common (<< 2:7.4.2347-1~)
Depends: libc6 (>= 2.4)
Breaks: vim-common (<< 2:7.4.2347-1~)
Description: tool to make (or reverse) a hex dump
 xxd creates a hex dump of a given file or standard input.  It can also convert
 a hex dump back to its original binary form.
Homepage: http://www.vim.org/

Package: libfastjson4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 49
Maintainer: Michael Biebl <biebl@debian.org>
Architecture: armhf
Multi-Arch: same
Source: libfastjson
Version: 0.99.4-1
Depends: libc6 (>= 2.8)
Description: fast json library for C
 The libfastjson library is a fork from json-c with a focus on performance.
 .
 This package contains the shared library.
Homepage: https://github.com/rsyslog/libfastjson

Package: libncursesw5
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 224
Maintainer: Craig Small <csmall@debian.org>
Architecture: armhf
Multi-Arch: same
Source: ncurses
Version: 6.0+20161126-1+deb9u1
Depends: libtinfo5 (= 6.0+20161126-1+deb9u1), libc6 (>= 2.4)
Recommends: libgpm2
Description: shared libraries for terminal handling (wide character support)
 The ncurses library routines are a terminal-independent method of
 updating character screens with reasonable optimization.
 .
 This package contains the shared libraries necessary to run programs
 compiled with ncursesw, which includes support for wide characters.
Homepage: http://invisible-island.net/ncurses/

Package: bash
Essential: yes
Status: install ok installed
Priority: required
Section: shells
Installed-Size: 5442
Maintainer: Matthias Klose <doko@debian.org>
Architecture: armhf
Multi-Arch: foreign
Version: 4.4-5
Replaces: bash-completion (<< 20060301-0), bash-doc (<= 2.05-1)
Depends: base-files (>= 2.1.12), debianutils (>= 2.15)
Pre-Depends: dash (>= 0.5.5.1-2.2), libc6 (>= 2.15), libtinfo5 (>= 6)
Recommends: bash-completion (>= 20060301-0)
Suggests: bash-doc
Conflicts: bash-completion (<< 20060301-0)
Conffiles:
 /etc/bash.bashrc 87b895cef45b8090d628a1d9a0f4bfb8
 /etc/skel/.bash_logout 22bfb8c1dd94b5f3813a2b25da67463f
 /etc/skel/.bashrc ee35a240758f374832e809ae0ea4883a
 /etc/skel/.profile ecb6d3479ac3823f1da7f314d871989b
Description: GNU Bourne Again SHell
 Bash is an sh-compatible command language interpreter that executes
 commands read from the standard input or from a file.  Bash also
 incorporates useful features from the Korn and C shells (ksh and csh).
 .
 Bash is ultimately intended to be a conformant implementation of the
 IEEE POSIX Shell and Tools specification (IEEE Working Group 1003.2).
 .
 The Programmable Completion Code, by Ian Macdonald, is now found in
 the bash-completion package.
Homepage: http://tiswww.case.edu/php/chet/bash/bashtop.html

Package: isc-dhcp-common
Status: install ok installed
Priority: important
Section: net
Installed-Size: 141
Maintainer: Debian ISC DHCP maintainers <pkg-dhcp-devel@lists.alioth.debian.org>
Architecture: armhf
Source: isc-dhcp
Version: 4.3.5-3
Depends: debianutils (>= 2.8.2)
Description: common manpages relevant to all of the isc-dhcp packages
 This package includes manpages that are relevant to the various ISC DHCP
 packages.
 .
 The dhcp-options manpage describes available options for dhcpd and dhclient.
 The dhcp-eval manpage describes evaluation of conditional expressions.
Homepage: http://www.isc.org

Package: dmidecode
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 108
Maintainer: Jörg Frings-Fürst <debian@jff-webhosting.net>
Architecture: armhf
Version: 3.0-4
Depends: libc6 (>= 2.4)
Description: SMBIOS/DMI table decoder
 Dmidecode reports information about the system's hardware as described in the
 system BIOS according to the SMBIOS/DMI standard.
 .
 This information typically includes system manufacturer, model name, serial
 number, BIOS version, asset tag as well as a lot of other details of varying
 level of interest and reliability depending on the manufacturer. This will
 often include usage status for the CPU sockets, expansion slots (e.g. AGP, PCI,
 ISA) and memory module slots, and the list of I/O ports (e.g. serial, parallel,
 USB).
 .
 Beware that DMI data have proven to be too unreliable to be blindly trusted.
 Dmidecode does not scan the hardware, it only reports what the BIOS told it to.
Homepage: https://dmidecode.nongnu.org/

Package: libuuid1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 102
Maintainer: Debian util-linux Maintainers <ah-util-linux@debian.org>
Architecture: armhf
Multi-Arch: same
Source: util-linux
Version: 2.29.2-1
Replaces: e2fsprogs (<< 1.34-1)
Depends: passwd, libc6 (>= 2.4)
Recommends: uuid-runtime
Description: Universally Unique ID library
 The libuuid library generates and parses 128-bit Universally Unique
 IDs (UUIDs). A UUID is an identifier that is unique within the space
 of all such identifiers across both space and time. It can be used for
 multiple purposes, from tagging objects with an extremely short lifetime
 to reliably identifying very persistent objects across a network.
 .
 See RFC 4122 for more information.

Package: libdb5.3
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 1115
Maintainer: Debian Berkeley DB Group <pkg-db-devel@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: same
Source: db5.3
Version: 5.3.28-12+deb9u1
Depends: libc6 (>= 2.17)
Description: Berkeley v5.3 Database Libraries [runtime]
 This is the runtime package for programs that use the v5.3 Berkeley
 database library.
Homepage: http://www.oracle.com/technetwork/database/database-technologies/berkeleydb/overview/index.html

Package: libldap-common
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 108
Maintainer: Debian OpenLDAP Maintainers <pkg-openldap-devel@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Source: openldap
Version: 2.4.44+dfsg-5+deb9u1
Replaces: libldap-2.4-2 (<< 2.4.44+dfsg-1)
Conffiles:
 /etc/ldap/ldap.conf 0b3f4d19d88498314478273ce10b0a70
Description: OpenLDAP common files for libraries
 These are common files for the run-time libraries for the OpenLDAP
 (Lightweight Directory Access Protocol) servers and clients.
Homepage: http://www.openldap.org/

Package: apt-utils
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 978
Maintainer: APT Development Team <deity@lists.debian.org>
Architecture: armhf
Source: apt
Version: 1.4.8
Depends: apt (= 1.4.8), libapt-inst2.0 (>= 1.0.5), libapt-pkg5.0 (>= 1.3~rc2), libc6 (>= 2.4), libdb5.3, libgcc1 (>= 1:3.5), libstdc++6 (>= 5.2)
Description: package management related utility programs
 This package contains some less used commandline utilities related
 to package management with APT.
 .
  * apt-extracttemplates is used by debconf to prompt for configuration
    questions before installation.
  * apt-ftparchive is used to create Packages and other index files
    needed to publish an archive of Debian packages
  * apt-sortpkgs is a Packages/Sources file normalizer.

Package: libreadline7
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 280
Maintainer: Matthias Klose <doko@debian.org>
Architecture: armhf
Multi-Arch: same
Source: readline
Version: 7.0-3
Depends: readline-common, libc6 (>= 2.15), libtinfo5 (>= 6)
Description: GNU readline and history libraries, run-time libraries
 The GNU readline library aids in the consistency of user interface
 across discrete programs that need to provide a command line
 interface.
 .
 The GNU history library provides a consistent user interface for
 recalling lines of previously typed input.

Package: libcap2-bin
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 73
Maintainer: Christian Kastner <ckk@debian.org>
Architecture: armhf
Multi-Arch: foreign
Source: libcap2
Version: 1:2.25-1
Replaces: libcap-bin
Depends: libc6 (>= 2.4), libcap2 (>= 1:2.10)
Recommends: libpam-cap
Breaks: libcap-bin
Description: POSIX 1003.1e capabilities (utilities)
 Libcap implements the user-space interfaces to the POSIX 1003.1e capabilities
 available in Linux kernels. These capabilities are a partitioning of the all
 powerful root privilege into a set of distinct privileges.
 .
 This package contains additional utilities.
Homepage: http://sites.google.com/site/fullycapable/

Package: debconf
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 558
Maintainer: Debconf Developers <debconf-devel@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 1.5.61
Replaces: debconf-tiny
Provides: debconf-2.0
Pre-Depends: perl-base (>= 5.20.1-3~)
Recommends: apt-utils (>= 0.5.1), debconf-i18n
Suggests: debconf-doc, debconf-utils, whiptail | dialog, libterm-readline-gnu-perl, libgtk2-perl (>= 1:1.130), libnet-ldap-perl, perl, libqtgui4-perl, libqtcore4-perl
Conflicts: apt (<< 0.3.12.1), cdebconf (<< 0.96), debconf-tiny, debconf-utils (<< 1.3.22), dialog (<< 0.9b-20020814-1), menu (<= 2.1.3-1), whiptail (<< 0.51.4-11), whiptail-utf8 (<= 0.50.17-13)
Conffiles:
 /etc/apt/apt.conf.d/70debconf 7e9d09d5801a42b4926b736b8eeabb73
 /etc/debconf.conf 8c0619be413824f1fc7698cee0f23811
Description: Debian configuration management system
 Debconf is a configuration management system for debian packages. Packages
 use Debconf to ask questions when they are installed.

Package: debconf-i18n
Status: install ok installed
Priority: important
Section: localization
Installed-Size: 780
Maintainer: Debconf Developers <debconf-devel@lists.alioth.debian.org>
Architecture: all
Source: debconf
Version: 1.5.61
Replaces: debconf (<< 1.3.0), debconf-utils (<< 1.3.22)
Depends: debconf (= 1.5.61), liblocale-gettext-perl, libtext-iconv-perl, libtext-wrapi18n-perl, libtext-charwidth-perl
Conflicts: debconf-english, debconf-utils (<< 1.3.22)
Description: full internationalization support for debconf
 This package provides full internationalization for debconf, including
 translations into all available languages, support for using translated
 debconf templates, and support for proper display of multibyte character
 sets.

Package: zlib1g
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 123
Maintainer: Mark Brown <broonie@debian.org>
Architecture: armhf
Multi-Arch: same
Source: zlib
Version: 1:1.2.8.dfsg-5
Provides: libz1
Depends: libc6 (>= 2.4)
Breaks: libxml2 (<< 2.7.6.dfsg-2), texlive-binaries (<< 2009-12)
Conflicts: zlib1 (<= 1:1.0.4-7)
Description: compression library - runtime
 zlib is a library implementing the deflate compression method found
 in gzip and PKZIP.  This package includes the shared library.
Homepage: http://zlib.net/

Package: bsd-mailx
Status: install ok installed
Priority: optional
Section: mail
Installed-Size: 132
Maintainer: Robert Luberda <robert@debian.org>
Architecture: armhf
Version: 8.1.2-0.20160123cvs-4
Provides: mail-reader, mailx
Depends: base-files (>= 2.2.0), default-mta | mail-transport-agent, libbsd0 (>= 0.2.0), libc6 (>= 2.17), liblockfile1 (>= 1.0)
Conffiles:
 /etc/mail.rc 2bd8160a85f53c20e55ebd375fc89431
Description: simple mail user agent
 bsd-mailx is the traditional simple command-line-mode mail user agent.
 Even if you don't use it, it may be required by other programs.
 .
 The /usr/bin/mail command provided by this package is a very simple one,
 and does not include many features that can be found in more advanced
 mail user agents.
 .
 For example bsd-mailx DOES NOT support:
  - MIME           (i.e. no attachments, no UTF-8 or other charsets support);
  - SMTP protocol  (/usr/sbin/sendmail interface only is used);
  - POP3/IMAP      (bsd-mailx reads local mailboxes only);
  - maildir format (traditional mbox only format is supported).
 .
 If the above features are needed, please consider installing another package
 providing similar /usr/bin/mail interface:
  - s-nail package,
  - or mailutils package.

Package: libpsl5
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 65
Maintainer: Tim Rühsen <tim.ruehsen@gmx.de>
Architecture: armhf
Multi-Arch: same
Source: libpsl
Version: 0.17.0-3
Depends: libidn2-0 (>= 0.16), libc6 (>= 2.4), libunistring0
Recommends: publicsuffix (>= 20150507)
Description: Library for Public Suffix List (shared libraries)
 Libpsl allows checking domains against the Public Suffix List.
 It can be used to avoid privacy-leaking 'super-cookies',
 'super domain' certificates, for domain highlighting purposes
 sorting domain lists by site and more.
 .
 Please see https://publicsuffix.org for more detailed information.
 .
 This package contains runtime libraries.
Homepage: https://github.com/rockdaboot/libpsl

Package: hostname
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 42
Maintainer: Debian Hostname Team <hostname-devel@lists.alioth.debian.org>
Architecture: armhf
Source: hostname (3.18)
Version: 3.18+b1
Replaces: nis (<< 3.17-30)
Pre-Depends: libc6 (>= 2.4)
Breaks: nis (<< 3.17-30)
Description: utility to set/show the host name or domain name
 This package provides commands which can be used to display the system's
 DNS name, and to display or set its hostname or NIS domain name.

Package: multiarch-support
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 220
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Architecture: armhf
Multi-Arch: foreign
Source: glibc
Version: 2.24-11+deb9u1
Depends: libc6 (>= 2.13-5)
Description: Transitional package to ensure multiarch compatibility
 This is a transitional package used to ensure multiarch support is present
 in ld.so before unpacking libraries to the multiarch directories.  It can
 be removed once nothing on the system depends on it.
Homepage: http://www.gnu.org/software/libc/libc.html

Package: tzdata
Status: install ok installed
Priority: required
Section: localization
Installed-Size: 3009
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 2017c-0+deb9u1
Replaces: libc0.1, libc0.3, libc6, libc6.1
Provides: tzdata-stretch
Depends: debconf (>= 0.5) | debconf-2.0
Description: time zone and daylight-saving time data
 This package contains data required for the implementation of
 standard local time for many representative locations around the
 globe. It is updated periodically to reflect changes made by
 political bodies to time zone boundaries, UTC offsets, and
 daylight-saving rules.
Homepage: http://www.iana.org/time-zones

Package: init
Status: install ok installed
Priority: important
Section: metapackages
Installed-Size: 19
Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: foreign
Source: init-system-helpers
Version: 1.48
Depends: init-system-helpers (>= 1.25)
Pre-Depends: systemd-sysv | sysvinit-core
Description: metapackage ensuring an init system is installed
 This package is a metapackage which allows you to select from the available
 init systems while ensuring that one of these is available on the system at
 all times.
Important: yes

Package: systemd-sysv
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 105
Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: foreign
Source: systemd
Version: 232-25+deb9u1
Replaces: sysvinit (<< 2.88dsf-44~), sysvinit-core, upstart (<< 1.13.2-0ubuntu10~), upstart-sysv
Pre-Depends: systemd
Conflicts: file-rc, openrc (<< 0.20.4-2.1), sysvinit-core, upstart (<< 1.13.2-0ubuntu10~), upstart-sysv
Description: system and service manager - SysV links
 systemd is a system and service manager for Linux. It provides aggressive
 parallelization capabilities, uses socket and D-Bus activation for starting
 services, offers on-demand starting of daemons, keeps track of processes using
 Linux control groups, maintains mount and automount points and implements an
 elaborate transactional dependency-based service control logic.
 .
 systemd is compatible with SysV and LSB init scripts and can work as a
 drop-in replacement for sysvinit.
 .
 This package provides the manual pages and links needed for systemd
 to replace sysvinit. Installing systemd-sysv will overwrite /sbin/init with a
 link to systemd.
Homepage: https://www.freedesktop.org/wiki/Software/systemd

Package: mawk
Status: install ok installed
Priority: required
Section: interpreters
Installed-Size: 144
Maintainer: Steve Langasek <vorlon@debian.org>
Architecture: armhf
Multi-Arch: foreign
Source: mawk (1.3.3-17)
Version: 1.3.3-17+b3
Provides: awk
Pre-Depends: libc6 (>= 2.11)
Description: a pattern scanning and text processing language
 Mawk is an interpreter for the AWK Programming Language. The AWK
 language is useful for manipulation of data files, text retrieval and
 processing, and for prototyping and experimenting with algorithms. Mawk
 is a new awk meaning it implements the AWK language as defined in Aho,
 Kernighan and Weinberger, The AWK Programming Language, Addison-Wesley
 Publishing, 1988. (Hereafter referred to as the AWK book.) Mawk conforms
 to the POSIX 1003.2 (draft 11.3) definition of the AWK language
 which contains a few features not described in the AWK book, and mawk
 provides a small number of extensions.
 .
 Mawk is smaller and much faster than gawk. It has some compile-time
 limits such as NF = 32767 and sprintf buffer = 1020.

Package: gzip
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 197
Maintainer: Bdale Garbee <bdale@gag.com>
Architecture: armhf
Source: gzip (1.6-5)
Version: 1.6-5+b1
Depends: dpkg (>= 1.15.4) | install-info
Pre-Depends: libc6 (>= 2.17)
Suggests: less
Description: GNU compression utilities
 This package provides the standard GNU file compression utilities, which
 are also the default compression tools for Debian.  They typically operate
 on files with names ending in '.gz', but can also decompress files ending
 in '.Z' created with 'compress'.

Package: libelf1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 901
Maintainer: Kurt Roeckx <kurt@roeckx.be>
Architecture: armhf
Multi-Arch: same
Source: elfutils
Version: 0.168-1
Depends: libc6 (>= 2.4), zlib1g (>= 1:1.1.4)
Description: library to read and write ELF files
 The libelf1 package provides a shared library which allows reading and
 writing ELF files on a high level.  Third party programs depend on
 this package to read internals of ELF files.  The programs of the
 elfutils package use it also to generate new ELF files.
 .
 This library is part of elfutils.
Homepage: https://sourceware.org/elfutils/

Package: groff-base
Status: install ok installed
Priority: important
Section: text
Installed-Size: 2589
Maintainer: Colin Watson <cjwatson@debian.org>
Architecture: armhf
Multi-Arch: foreign
Source: groff
Version: 1.22.3-9
Replaces: groff (<< 1.20.1-6), jgroff (<< 1.17-1)
Depends: libc6 (>= 2.4), libgcc1 (>= 1:4.0), libstdc++6 (>= 4.3.0)
Suggests: groff
Breaks: groff (<< 1.17-1), jgroff (<< 1.17-1), pmake (<< 1.45-7), troffcvt (<< 1.04-14)
Conffiles:
 /etc/groff/man.local e6591616404c7c443f71ff21d27430d7
 /etc/groff/mdoc.local 4bc6267468942826b757fa2f868c8237
Description: GNU troff text-formatting system (base system components)
 This package contains the traditional UN*X text formatting tools
 troff, nroff, tbl, eqn, and pic. These utilities, together with the
 man-db package, are essential for displaying the on-line manual pages.
 .
 groff-base is a stripped-down package containing the necessary components
 to read manual pages in ASCII, Latin-1, and UTF-8, plus the PostScript
 device (groff's default). Users who want a full groff installation, with
 the standard set of devices, fonts, macros, and documentation, should
 install the groff package.
Homepage: https://www.gnu.org/software/groff/

Package: liblognorm1
Status: install ok installed
Priority: extra
Section: libs
Installed-Size: 81
Maintainer: Pierre Chifflier <pollux@debian.org>
Architecture: armhf
Multi-Arch: same
Source: liblognorm
Version: 1.0.1-3
Replaces: liblognorm0
Depends: libc6 (>= 2.4), libestr0 (>= 0.1.0), libjson-c2 (>= 0.10)
Pre-Depends: multiarch-support
Description: Log normalizing library
 Liblognorm is a event and log normalization library that is capable of
 real-time processing. It provides the capability to normalize events to
 a set of standard formats.
 .
 This package contains the shared library.
Homepage: http://www.liblognorm.com/

Package: liblockfile1
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 35
Maintainer: Miquel van Smoorenburg <miquels@cistron.nl>
Architecture: armhf
Multi-Arch: same
Source: liblockfile (1.14-1)
Version: 1.14-1+b1
Depends: libc6 (>= 2.4), liblockfile-bin (>= 1.14-1+b1)
Pre-Depends: multiarch-support
Description: NFS-safe locking library
 Liblockfile is a shared library with NFS-safe locking functions.

Package: gpgv
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 572
Maintainer: Debian GnuPG Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: foreign
Source: gnupg2
Version: 2.1.18-8~deb9u1
Replaces: gnupg2 (<< 2.0.21-2), gpgv2 (<< 2.1.11-7+exp1)
Depends: libbz2-1.0, libc6 (>= 2.7), libgcrypt20 (>= 1.7.0), libgpg-error0 (>= 1.14), zlib1g (>= 1:1.1.4)
Suggests: gnupg
Breaks: gnupg2 (<< 2.0.21-2), gpgv2 (<< 2.1.11-7+exp1), python-debian (<< 0.1.29)
Description: GNU privacy guard - signature verification tool
 GnuPG is GNU's tool for secure communication and data storage.
 .
 gpgv is actually a stripped-down version of gpg which is only able
 to check signatures. It is somewhat smaller than the fully-blown gpg
 and uses a different (and simpler) way to check that the public keys
 used to make the signature are valid. There are no configuration
 files and only a few options are implemented.
Homepage: https://www.gnupg.org/

Package: libcap2
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 38
Maintainer: Christian Kastner <ckk@debian.org>
Architecture: armhf
Multi-Arch: same
Version: 1:2.25-1
Depends: libc6 (>= 2.8)
Description: POSIX 1003.1e capabilities (library)
 Libcap implements the user-space interfaces to the POSIX 1003.1e capabilities
 available in Linux kernels. These capabilities are a partitioning of the all
 powerful root privilege into a set of distinct privileges.
 .
 This package contains the shared library.
Homepage: http://sites.google.com/site/fullycapable/

Package: bsdutils
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 205
Maintainer: Debian util-linux Maintainers <ah-util-linux@debian.org>
Architecture: armhf
Multi-Arch: foreign
Source: util-linux (2.29.2-1)
Version: 1:2.29.2-1
Replaces: bash-completion (<< 1:2.1-4.1~)
Pre-Depends: libc6 (>= 2.16), libsystemd0
Recommends: bsdmainutils
Breaks: bash-completion (<< 1:2.1-4.1~)
Description: basic utilities from 4.4BSD-Lite
 This package contains the bare minimum of BSD utilities needed for a
 Debian system: logger, renice, script, scriptreplay, and wall. The
 remaining standard BSD utilities are provided by bsdmainutils.

Package: whiptail
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 60
Maintainer: Alastair McKinstry <mckinstry@debian.org>
Architecture: armhf
Multi-Arch: foreign
Source: newt (0.52.19-1)
Version: 0.52.19-1+b1
Depends: libc6 (>= 2.4), libnewt0.52, libpopt0 (>= 1.14), libslang2 (>= 2.2.4)
Description: Displays user-friendly dialog boxes from shell scripts
 Whiptail is a "dialog" replacement using newt instead of ncurses. It
 provides a method of displaying several different types of dialog boxes
 from shell scripts. This allows a developer of a script to interact with
 the user in a much friendlier manner.
Homepage: https://fedorahosted.org/newt/

Package: dash
Essential: yes
Status: install ok installed
Priority: required
Section: shells
Installed-Size: 163
Maintainer: Gerrit Pape <pape@smarden.org>
Architecture: armhf
Version: 0.5.8-2.4
Depends: debianutils (>= 2.15), dpkg (>= 1.15.0)
Pre-Depends: libc6 (>= 2.11)
Description: POSIX-compliant shell
 The Debian Almquist Shell (dash) is a POSIX-compliant shell derived
 from ash.
 .
 Since it executes scripts faster than bash, and has fewer library
 dependencies (making it more robust against software or hardware
 failures), it is used as the default system shell on Debian systems.
Homepage: http://gondor.apana.org.au/~herbert/dash/

Package: gcc-6-base
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 209
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: armhf
Multi-Arch: same
Source: gcc-6
Version: 6.3.0-18
Breaks: gcc-4.4-base (<< 4.4.7), gcc-4.7-base (<< 4.7.3), gcj-4.4-base (<< 4.4.6-9~), gcj-4.6-base (<< 4.6.1-4~), gnat-4.4-base (<< 4.4.6-3~), gnat-4.6 (<< 4.6.1-5~)
Description: GCC, the GNU Compiler Collection (base package)
 This package contains files common to all languages and libraries
 contained in the GNU Compiler Collection (GCC).
Homepage: http://gcc.gnu.org/

Package: libsasl2-modules-db
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 88
Maintainer: Debian Cyrus SASL Team <pkg-cyrus-sasl2-debian-devel@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: same
Source: cyrus-sasl2
Version: 2.1.27~101-g0780600+dfsg-3
Depends: libc6 (>= 2.4), libdb5.3
Description: Cyrus SASL - pluggable authentication modules (DB)
 This is the Cyrus SASL API implementation, version 2.1. See package
 libsasl2-2 and RFC 2222 for more information.
 .
 This package provides the DB plugin, which supports Berkeley DB lookups.
Homepage: https://www.cyrusimap.org/

Package: liblogging-stdlog0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 29
Maintainer: Michael Biebl <biebl@debian.org>
Architecture: armhf
Multi-Arch: same
Source: liblogging (1.0.5-2)
Version: 1.0.5-2+b2
Depends: libc6 (>= 2.4)
Description: easy to use and lightweight logging library
 Liblogging consists of several components with stdlog being the core
 component. Think of liblogging-stdlog as the next version of the
 syslog(3) API. It retains the simple semantics, but makes the API more
 sophisticated "behind the scenes" with better support for multiple
 threads and flexibility for different log destinations.
 .
 This package contains the shared library.
Homepage: http://www.liblogging.org/

Package: gnupg
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 1597
Maintainer: Debian GnuPG Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: foreign
Source: gnupg2
Version: 2.1.18-8~deb9u1
Replaces: gnupg2 (<< 2.1.11-7+exp1)
Provides: gpg
Depends: gnupg-agent (= 2.1.18-8~deb9u1), libassuan0 (>= 2.0.1), libbz2-1.0, libc6 (>= 2.15), libgcrypt20 (>= 1.7.0), libgpg-error0 (>= 1.14), libksba8 (>= 1.3.4), libreadline7 (>= 6.0), libsqlite3-0 (>= 3.7.15), zlib1g (>= 1:1.1.4)
Recommends: dirmngr (= 2.1.18-8~deb9u1), gnupg-l10n (= 2.1.18-8~deb9u1)
Suggests: parcimonie, xloadimage
Breaks: debsig-verify (<< 0.15), dirmngr (<< 2.1.18-8~deb9u1), gnupg2 (<< 2.1.11-7+exp1), libgnupg-interface-perl (<< 0.52-3), libgnupg-perl (<= 0.19-1), libmail-gnupg-perl (<= 0.22-1), monkeysphere (<< 0.38~), php-crypt-gpg (<= 1.4.1-1), python-apt (<= 1.1.0~beta4), python-gnupg (<< 0.3.8-3), python3-apt (<= 1.1.0~beta4)
Description: GNU privacy guard - a free PGP replacement
 GnuPG is GNU's tool for secure communication and data storage.
 It can be used to encrypt data and to create digital signatures.
 It includes an advanced key management facility and is compliant
 with the proposed OpenPGP Internet standard as described in RFC4880.
 .
 This package contains /usr/bin/gpg and some helper utilities like
 gpgconf and kbxutil.
Homepage: https://www.gnupg.org/

Package: mount
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 357
Maintainer: Debian util-linux Maintainers <ah-util-linux@debian.org>
Architecture: armhf
Multi-Arch: foreign
Source: util-linux
Version: 2.29.2-1
Replaces: bash-completion (<< 1:2.1-4.3~)
Pre-Depends: libblkid1 (>= 2.17.2), libc6 (>= 2.17), libmount1 (>= 2.25), libselinux1 (>= 2.6-3~), libsmartcols1 (>= 2.28~rc1), libudev1 (>= 183)
Suggests: nfs-common (>= 1:1.1.0-13)
Breaks: bash-completion (<< 1:2.1-4.3~)
Description: tools for mounting and manipulating filesystems
 This package provides the mount(8), umount(8), swapon(8),
 swapoff(8), and losetup(8) commands.

Package: libgnutls30
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 1944
Maintainer: Debian GnuTLS Maintainers <pkg-gnutls-maint@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: same
Source: gnutls28
Version: 3.5.8-5+deb9u3
Depends: libc6 (>= 2.22), libgmp10 (>= 2:6), libhogweed4, libidn11 (>= 1.13), libnettle6, libp11-kit0 (>= 0.23.1), libtasn1-6 (>= 4.9), zlib1g (>= 1:1.1.4)
Suggests: gnutls-bin
Description: GNU TLS library - main runtime library
 GnuTLS is a portable library which implements the Transport Layer
 Security (TLS 1.0, 1.1, 1.2) and Secure Sockets Layer (SSL) 3.0 and Datagram
 Transport Layer Security (DTLS 1.0, 1.2) protocols.
 .
 GnuTLS features support for:
  - TLS extensions: server name indication, max record size, opaque PRF
    input, etc.
  - authentication using the SRP protocol.
  - authentication using both X.509 certificates and OpenPGP keys.
  - TLS Pre-Shared-Keys (PSK) extension.
  - Inner Application (TLS/IA) extension.
  - X.509 and OpenPGP certificate handling.
  - X.509 Proxy Certificates (RFC 3820).
  - all the strong encryption algorithms (including SHA-256/384/512 and
    Camellia (RFC 4132)).
 .
 This package contains the main runtime library.
Homepage: http://www.gnutls.org/

Package: libx11-6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1178
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: armhf
Multi-Arch: same
Source: libx11
Version: 2:1.6.4-3
Depends: libc6 (>= 2.15), libxcb1 (>= 1.11.1), libx11-data
Description: X11 client-side library
 This package provides a client interface to the X Window System, otherwise
 known as 'Xlib'.  It provides a complete API for the basic functions of the
 window system.
 .
 More information about X.Org can be found at:
 <URL:https://www.X.org>
 .
 This module can be found at
 git://anongit.freedesktop.org/git/xorg/lib/libX11

Package: libsasl2-2
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 142
Maintainer: Debian Cyrus SASL Team <pkg-cyrus-sasl2-debian-devel@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: same
Source: cyrus-sasl2
Version: 2.1.27~101-g0780600+dfsg-3
Replaces: libsasl2
Depends: libsasl2-modules-db (>= 2.1.27~101-g0780600+dfsg-3), libc6 (>= 2.15)
Recommends: libsasl2-modules (>= 2.1.27~101-g0780600+dfsg-3)
Breaks: postfix (<= 2.8.3-1), slapd (<= 2.4.25-3)
Description: Cyrus SASL - authentication abstraction library
 This is the Cyrus SASL API implementation, version 2.1.
 .
 SASL is the Simple Authentication and Security Layer, a method for
 adding authentication support to connection-based protocols. To use
 SASL, a protocol includes a command for identifying and
 authenticating a user to a server and for optionally negotiating
 protection of subsequent protocol interactions. If its use is
 negotiated, a security layer is inserted between the protocol and the
 connection. See RFC 2222 for more information.
 .
 Any of: ANONYMOUS, CRAM-MD5, DIGEST-MD5, GSSAPI (MIT or Heimdal
 Kerberos 5), NTLM, OTP, PLAIN, or LOGIN can be used.
Homepage: https://www.cyrusimap.org/

Package: libsystemd0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 458
Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: same
Source: systemd
Version: 232-25+deb9u1
Pre-Depends: libc6 (>= 2.17), libgcc1 (>= 1:3.5), libgcrypt20 (>= 1.7.0), liblz4-1 (>= 0.0~r113), liblzma5 (>= 5.1.1alpha+20120614), libselinux1 (>= 2.1.9)
Description: systemd utility library
 The libsystemd0 library provides interfaces to various systemd components.
Homepage: https://www.freedesktop.org/wiki/Software/systemd

Package: libdns-export162
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1457
Maintainer: LaMont Jones <lamont@debian.org>
Architecture: armhf
Source: bind9
Version: 1:9.10.3.dfsg.P4-12.3+deb9u3
Depends: libc6 (>= 2.4), libisc-export160, libssl1.0.2 (>= 1.0.2d)
Description: Exported DNS Shared Library
 The Berkeley Internet Name Domain (BIND) implements an Internet domain
 name server.  BIND is the most widely-used name server software on the
 Internet, and is supported by the Internet Software Consortium, www.isc.org.
 .
 This package delivers the exported libdns shared library.

Package: libpsl0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 451
Maintainer: Tim Rühsen <tim.ruehsen@gmx.de>
Architecture: armhf
Multi-Arch: same
Source: libpsl
Version: 0.5.1-1
Depends: libc6 (>= 2.8), libicu52 (>= 52~m1-1~)
Description: Library for Public Suffix List (shared libraries)
 Libpsl allows checking domains against the Public Suffix List,
 It can be used to avoid privacy-leaking 'super-cookies',
 'super domain' certificates, for domain highlighting purposes
 sorting domain lists by site and more.
 .
 This package contains runtime libraries.
Homepage: https://github.com/rockdaboot/libpsl

Package: libc6
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 8380
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Architecture: armhf
Multi-Arch: same
Source: glibc
Version: 2.24-11+deb9u1
Depends: libgcc1
Suggests: glibc-doc, debconf | debconf-2.0, libc-l10n, locales
Breaks: hurd (<< 1:0.5.git20140203-1), libtirpc1 (<< 0.2.3), locales (<< 2.24), locales-all (<< 2.24), nscd (<< 2.24)
Conffiles:
 /etc/ld.so.conf.d/arm-linux-gnueabihf.conf fcce838d54cc444500f01049db2aae8c
Description: GNU C Library: Shared libraries
 Contains the standard libraries that are used by nearly all programs on
 the system. This package includes shared versions of the standard C library
 and the standard math library, as well as many others.
Homepage: http://www.gnu.org/software/libc/libc.html

Package: netcat-traditional
Status: install ok installed
Priority: important
Section: net
Installed-Size: 128
Maintainer: Ruben Molina <rmolina@udea.edu.co>
Architecture: armhf
Source: netcat (1.10-41)
Version: 1.10-41+b1
Provides: netcat
Depends: libc6 (>= 2.15)
Description: TCP/IP swiss army knife
 A simple Unix utility which reads and writes data across network
 connections using TCP or UDP protocol. It is designed to be a reliable
 "back-end" tool that can be used directly or easily driven by other
 programs and scripts. At the same time it is a feature-rich network
 debugging and exploration tool, since it can create almost any kind
 of connection you would need and has several interesting built-in
 capabilities.
 .
 This is the "classic" netcat, written by *Hobbit*. It lacks many
 features found in netcat-openbsd.

Package: libprocps3
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 111
Maintainer: Craig Small <csmall@debian.org>
Architecture: armhf
Multi-Arch: same
Source: procps
Version: 2:3.3.9-9
Replaces: procps (<< 1:3.3.2-1)
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Description: library for accessing process information from /proc
 The libprocps library is a way of accessing information out of the /proc
 filesystem.
 .
 This package contains the shared libraries necessary to run programs
 compilied with libprocps.
Homepage: http://gitorious.org/procps

Package: libboost-iostreams1.55.0
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 143
Maintainer: Debian Boost Team <pkg-boost-devel@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: same
Source: boost1.55
Version: 1.55.0+dfsg-3
Depends: libbz2-1.0, libc6 (>= 2.4), libgcc1 (>= 1:4.4.0), libstdc++6 (>= 4.3.0), zlib1g (>= 1:1.1.4)
Pre-Depends: multiarch-support
Description: Boost.Iostreams Library
 This package forms part of the Boost C++ Libraries collection.
 .
 Boost.Iostreams are a collection of concepts and a set of templates
 which turn models of these concepts into C++ standard library streams
 and stream buffers.
Homepage: http://www.boost.org/libs/iostreams/

Package: libiptc0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 88
Maintainer: Arturo Borrero Gonzalez <arturo@debian.org>
Architecture: armhf
Multi-Arch: same
Source: iptables
Version: 1.6.0+snapshot20161117-6
Depends: libc6 (>= 2.4), libip4tc0 (>= 1.6.0+snapshot20161117), libip6tc0 (>= 1.6.0+snapshot2016111)
Description: netfilter libiptc library
 The user-space iptables C library from the Netfilter xtables framework.
 .
 iptables v4/v6 ruleset ADT and kernel interface.
 .
 This library has been considered private for years (and still is), in the
 sense of changing symbols and backward compatibility not guaranteed.
Homepage: http://www.netfilter.org/

Package: startpar
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 53
Maintainer: Debian sysvinit maintainers <pkg-sysvinit-devel@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: foreign
Version: 0.59-3.1
Replaces: sysvinit-utils (<< 2.88dsf-52)
Depends: libc6 (>= 2.15)
Suggests: insserv, sysv-rc
Breaks: sysvinit-utils (<< 2.88dsf-52)
Conffiles:
 /etc/init/startpar-bridge.conf 152b77b1904939b461edc251844d0008
Description: run processes in parallel and multiplex their output
 Used by the sysv-rc boot system executor to run init.d scripts in parallel
 while making sure the script output is not completely messed up.
Homepage: http://savannah.nongnu.org/projects/sysvinit

Package: libirs-export91
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 56
Maintainer: LaMont Jones <lamont@debian.org>
Architecture: armhf
Source: bind9
Version: 1:9.9.5.dfsg-9+deb8u6
Depends: libc6 (>= 2.4), libdns-export100, libisc-export95, libisccfg-export90
Pre-Depends: multiarch-support
Description: Exported IRS Shared Library
 The Berkeley Internet Name Domain (BIND) implements an Internet domain
 name server.  BIND is the most widely-used name server software on the
 Internet, and is supported by the Internet Software Consortium, www.isc.org.
 .
 This package delivers the exported libirs shared library.

Package: libfdisk1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 348
Maintainer: Debian util-linux Maintainers <ah-util-linux@debian.org>
Architecture: armhf
Multi-Arch: same
Source: util-linux
Version: 2.29.2-1
Depends: libblkid1 (>= 2.24.2), libc6 (>= 2.17), libuuid1 (>= 2.16)
Description: fdisk partitioning library
 The libfdisk library is used for manipulating partition tables. It is
 the core of the fdisk, cfdisk, and sfdisk tools.

Package: libpipeline1
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 55
Maintainer: Colin Watson <cjwatson@debian.org>
Architecture: armhf
Multi-Arch: same
Source: libpipeline
Version: 1.4.1-2
Depends: libc6 (>= 2.15)
Description: pipeline manipulation library
 This is a C library for setting up and running pipelines of processes,
 without needing to involve shell command-line parsing which is often
 error-prone and insecure.
Homepage: http://libpipeline.nongnu.org/

Package: libpcre3
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 524
Maintainer: Matthew Vernon <matthew@debian.org>
Architecture: armhf
Multi-Arch: same
Source: pcre3
Version: 2:8.39-3
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Breaks: approx (<< 4.4-1~), cduce (<< 0.5.3-2~), cmigrep (<< 1.5-7~), galax (<< 1.1-7~), libpcre-ocaml (<< 6.0.1~), liquidsoap (<< 0.9.2-3~), ocsigen (<< 1.3.3-1~)
Conflicts: libpcre3-dev (<= 4.3-3)
Description: Old Perl 5 Compatible Regular Expression Library - runtime files
 This is a library of functions to support regular expressions whose syntax
 and semantics are as close as possible to those of the Perl 5 language.
 .
 New packages should use the newer pcre2 packages, and existing
 packages should migrate to pcre2.
 .
 This package contains the runtime libraries.

Package: libksba8
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 183
Maintainer: Debian GnuTLS Maintainers <pkg-gnutls-maint@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: same
Source: libksba
Version: 1.3.5-2
Depends: libc6 (>= 2.4), libgpg-error0 (>= 1.14)
Description: X.509 and CMS support library
 KSBA (pronounced Kasbah) is a library to make X.509 certificates as
 well as the CMS easily accessible by other applications.  Both
 specifications are building blocks of S/MIME and TLS.
 .
 KSBA provides these subsystems: ASN.1 Parser, BER Decoder, BER
 Encoder, Certificate Handling and CMS Handling.
 .
 This package contains the runtime library files.
Homepage: http://www.gnupg.org/related_software/libksba/

Package: libdevmapper1.02.1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 303
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: same
Source: lvm2 (2.02.168-2)
Version: 2:1.02.137-2
Depends: libc6 (>= 2.22), libselinux1 (>= 1.32), libudev1 (>= 183), dmsetup (>= 2:1.02.137-2)
Breaks: liblvm2app2.2 (<< 2.02.122), lvm2 (<< 2.02.122)
Conflicts: libdevmapper1.02
Description: Linux Kernel Device Mapper userspace library
 The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management)
 Team's implementation of a minimalistic kernel-space driver that handles
 volume management, while keeping knowledge of the underlying device layout
 in user-space.  This makes it useful for not only LVM, but software raid,
 and other drivers that create "virtual" block devices.
 .
 This package contains the (user-space) shared library for accessing the
 device-mapper; it allows usage of the device-mapper through a clean,
 consistent interface (as opposed to through kernel ioctls).
Homepage: http://sources.redhat.com/lvm2/

Package: coreutils
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 13454
Maintainer: Michael Stone <mstone@debian.org>
Architecture: armhf
Multi-Arch: foreign
Version: 8.26-3
Replaces: mktemp, realpath, timeout
Pre-Depends: libacl1 (>= 2.2.51-8), libattr1 (>= 1:2.4.46-8), libc6 (>= 2.17), libselinux1 (>= 2.1.13)
Conflicts: timeout
Description: GNU core utilities
 This package contains the basic file, shell and text manipulation
 utilities which are expected to exist on every operating system.
 .
 Specifically, this package includes:
 arch base64 basename cat chcon chgrp chmod chown chroot cksum comm cp
 csplit cut date dd df dir dircolors dirname du echo env expand expr
 factor false flock fmt fold groups head hostid id install join link ln
 logname ls md5sum mkdir mkfifo mknod mktemp mv nice nl nohup nproc numfmt
 od paste pathchk pinky pr printenv printf ptx pwd readlink realpath rm
 rmdir runcon sha*sum seq shred sleep sort split stat stty sum sync tac
 tail tee test timeout touch tr true truncate tsort tty uname unexpand
 uniq unlink users vdir wc who whoami yes
Homepage: http://gnu.org/software/coreutils

Package: exim4-base
Status: install ok installed
Priority: standard
Section: mail
Installed-Size: 1538
Maintainer: Exim4 Maintainers <pkg-exim4-maintainers@lists.alioth.debian.org>
Architecture: armhf
Source: exim4
Version: 4.89-2+deb9u2
Replaces: exim, exim-tls, exim4-daemon-custom, exim4-daemon-heavy, exim4-daemon-light
Depends: libc6 (>= 2.6), libdb5.3, debconf (>= 0.5) | debconf-2.0, cron | cron-daemon | anacron, exim4-config (>= 4.82) | exim4-config-2, adduser, netbase, lsb-base (>= 3.0-6)
Recommends: psmisc, mailx
Suggests: mail-reader, eximon4, exim4-doc-html | exim4-doc-info, gnutls-bin | openssl, file, spf-tools-perl, swaks
Breaks: exim4-daemon-custom (<< 4.89), exim4-daemon-heavy (<< 4.89), exim4-daemon-light (<< 4.89)
Conflicts: exim, exim-tls
Conffiles:
 /etc/cron.daily/exim4-base 17bf6e02c3f3d3180cb74668bba28144
 /etc/init.d/exim4 0eb380bbeb5db57a59e298a074f1f9f3
 /etc/logrotate.d/exim4-base cd9fc4ad67f13176c098fab4bbcd32b5
 /etc/logrotate.d/exim4-paniclog 27d670010e80246c4a1dd89419589009
Description: support files for all Exim MTA (v4) packages
 Exim (v4) is a mail transport agent. exim4-base provides the support
 files needed by all exim4 daemon packages. You need an additional package
 containing the main executable. The available packages are:
 .
  exim4-daemon-light
  exim4-daemon-heavy
 .
 If you build exim4 from the source package locally, you can also
 build an exim4-daemon-custom package tailored to your own feature set.
 .
 The Debian exim4 packages have their own web page,
 http://wiki.debian.org/PkgExim4. There is also a Debian-specific
 FAQ list. Information about the way the Debian packages are
 configured can be found in
 /usr/share/doc/exim4-base/README.Debian.gz, which additionally contains
 information about the way the Debian binary packages are built. The
 very extensive upstream documentation is shipped in
 /usr/share/doc/exim4-base/spec.txt.gz. To repeat the debconf-driven
 configuration process in a standard setup, invoke dpkg-reconfigure
 exim4-config. There is a Debian-centered mailing list,
 pkg-exim4-users@lists.alioth.debian.org. Please ask Debian-specific
 questions there, and only write to the upstream exim-users mailing
 list if you are sure that your question is not Debian-specific. You
 can find the subscription web page on
 http://lists.alioth.debian.org/mailman/listinfo/pkg-exim4-users
Homepage: http://www.exim.org/

Package: libdns-export100
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 832
Maintainer: LaMont Jones <lamont@debian.org>
Architecture: armhf
Source: bind9
Version: 1:9.9.5.dfsg-9+deb8u6
Depends: libc6 (>= 2.4), libisc-export95
Pre-Depends: multiarch-support
Description: Exported DNS Shared Library
 The Berkeley Internet Name Domain (BIND) implements an Internet domain
 name server.  BIND is the most widely-used name server software on the
 Internet, and is supported by the Internet Software Consortium, www.isc.org.
 .
 This package delivers the exported libdns shared library.

Package: smartmontools
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 1270
Maintainer: Giuseppe Iuculano <iuculano@debian.org>
Architecture: armhf
Version: 6.5+svn4324-1
Depends: debianutils (>= 2.2), lsb-base (>= 3.2-14), init-system-helpers (>= 1.18~), libc6 (>= 2.17), libcap-ng0, libgcc1 (>= 1:3.5), libselinux1 (>= 1.32), libstdc++6 (>= 5.2)
Recommends: mailx | mailutils
Suggests: gsmartcontrol, smart-notifier
Conflicts: smartsuite, ucsc-smartsuite
Conffiles:
 /etc/default/smartmontools 65d8b4ed9f0bcd1c800d204ac8ef2008
 /etc/init.d/smartmontools e1ff37fab620203e75462c589f5ae150
 /etc/smartd.conf 8f8bc44bdcfca6196919c4afdf4e9e7c
 /etc/smartmontools/run.d/10mail 07e70aa86dcab3b2c7205254e3e942e2
 /etc/smartmontools/run.d/10powersave-notify 5d52539f1a9c97f30959f6436d2f84e0
Description: control and monitor storage systems using S.M.A.R.T.
 The smartmontools package contains two utility programs (smartctl and smartd)
 to control and monitor storage systems using the Self-Monitoring, Analysis and
 Reporting Technology System (S.M.A.R.T.) built into most modern ATA and SCSI
 hard disks. It is derived from the smartsuite package, and includes support
 for ATA/ATAPI-5 disks. It should run on any modern Linux system.
Homepage: http://smartmontools.sourceforge.net/

Package: iproute2
Status: install ok installed
Priority: important
Section: net
Installed-Size: 1331
Maintainer: Debian iproute2 Maintainers <ah-iproute@debian.org>
Architecture: armhf
Multi-Arch: foreign
Version: 4.9.0-1+deb9u1
Replaces: iproute
Provides: arpd
Depends: libc6 (>= 2.14), libdb5.3, libelf1 (>= 0.131), libmnl0 (>= 1.0.3-4~), libselinux1 (>= 2.0.15)
Recommends: libatm1 (>= 2.4.1-17~), libxtables12 (>= 1.6.0+snapshot20161117)
Suggests: iproute2-doc
Conflicts: arpd, iproute (<< 20130000-1)
Conffiles:
 /etc/iproute2/bpf_pinning fd070252e6e9996bd04d9d59e4ce21eb
 /etc/iproute2/ematch_map b91e7f9b26918449bade9573f8871d61
 /etc/iproute2/group 3aea2c0e0dd75e13a5f8f48f2936915f
 /etc/iproute2/nl_protos c0fc5315e2dd3c6b50f19da3678bce80
 /etc/iproute2/rt_dsfield 4c80d267a84d350d89d88774efe48a0f
 /etc/iproute2/rt_protos a4f97323f29caf9faf49596aea11d91a
 /etc/iproute2/rt_realms 7137bdf40e8d58c87ac7e3bba503767f
 /etc/iproute2/rt_scopes 6298b8df09e9bda23ea7da49021ca457
 /etc/iproute2/rt_tables a1313318d6778fe6b8c680248ef5a463
 /etc/iproute2/rt_tables.d/README 16d42be21c00b9edfae1fd4c39c15afc
Description: networking and traffic control tools
 The iproute2 suite is a collection of utilities for networking and
 traffic control.
 .
 These tools communicate with the Linux kernel via the (rt)netlink
 interface, providing advanced features not available through the
 legacy net-tools commands 'ifconfig' and 'route'.
Homepage: https://wiki.linuxfoundation.org/networking/iproute2

Package: tcpd
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 73
Maintainer: Marco d'Itri <md@linux.it>
Architecture: armhf
Multi-Arch: foreign
Source: tcp-wrappers
Version: 7.6.q-26
Depends: libc6 (>= 2.4), libwrap0 (= 7.6.q-26)
Description: Wietse Venema's TCP wrapper utilities
 Wietse Venema's network logger, also known as TCPD or LOG_TCP.
 .
 These programs log the client host name of incoming telnet,
 ftp, rsh, rlogin, finger etc. requests.
 .
 Security options are:
  - access control per host, domain and/or service;
  - detection of host name spoofing or host address spoofing;
  - booby traps to implement an early-warning system.

Package: libbsd0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 154
Maintainer: Guillem Jover <guillem@debian.org>
Architecture: armhf
Multi-Arch: same
Source: libbsd
Version: 0.8.3-1
Depends: libc6 (>= 2.17)
Description: utility functions from BSD systems - shared library
 This library provides some C functions such as strlcpy() that are commonly
 available on BSD systems but not on others like GNU systems.
 .
 For a detailed list of the provided functions, please see the libbsd-dev
 package description.
Homepage: https://libbsd.freedesktop.org/

Package: e2fsprogs
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 3750
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Architecture: armhf
Multi-Arch: foreign
Version: 1.43.4-2
Replaces: hurd (<= 20040301-1), libblkid1 (<< 1.38+1.39-WIP-2005.12.10-2), libuuid1 (<< 1.38+1.39-WIP-2005.12.10-2)
Pre-Depends: e2fslibs (= 1.43.4-2), libblkid1 (>= 2.17.2), libc6 (>= 2.11), libcomerr2 (>= 1.42~WIP-2011-10-05-1), libss2 (>= 1.34-1), libuuid1 (>= 2.16), util-linux (>= 2.15~rc1-1)
Suggests: gpart, parted, fuse2fs, e2fsck-static
Conflicts: dump (<< 0.4b4-4), initscripts (<< 2.85-4), quota (<< 1.55-8.1), sysvinit (<< 2.85-4)
Conffiles:
 /etc/mke2fs.conf 22503ecadd27f788ab3e612aded4f5b0
Description: ext2/ext3/ext4 file system utilities
 The ext2, ext3 and ext4 file systems are successors of the original ext
 ("extended") file system. They are the main file system types used for
 hard disks on Debian and other Linux systems.
 .
 This package contains programs for creating, checking, and maintaining
 ext2/3/4-based file systems.  It also includes the "badblocks" program,
 which can be used to scan for bad blocks on a disk or other storage device.
Homepage: http://e2fsprogs.sourceforge.net

Package: tar
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 2606
Maintainer: Bdale Garbee <bdale@gag.com>
Architecture: armhf
Multi-Arch: foreign
Version: 1.29b-1.1
Replaces: cpio (<< 2.4.2-39)
Pre-Depends: libacl1 (>= 2.2.51-8), libc6 (>= 2.17), libselinux1 (>= 1.32)
Suggests: bzip2, ncompress, xz-utils, tar-scripts
Breaks: dpkg-dev (<< 1.14.26)
Conflicts: cpio (<= 2.4.2-38)
Conffiles:
 /etc/rmt 3c58b7cd13da1085eff0acc6a00f43c7
Description: GNU version of the tar archiving utility
 Tar is a program for packaging a set of files as a single archive in tar
 format.  The function it performs is conceptually similar to cpio, and to
 things like PKZIP in the DOS world.  It is heavily used by the Debian package
 management system, and is useful for performing system backups and exchanging
 sets of files with others.

Package: libkrb5support0
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 137
Maintainer: Sam Hartman <hartmans@debian.org>
Architecture: armhf
Multi-Arch: same
Source: krb5
Version: 1.15-1+deb9u1
Depends: libc6 (>= 2.8), libkeyutils1 (>= 1.4)
Breaks: libgssapi-krb5-2 (<< 1.13~alpha1-1), libk5crypto3 (<< 1.13~alpha1-1), libkadm5clnt-mit9 (<< 1.13~alpha1-1), libkadm5srv-mit9 (<< 1.13~alpha1-1), libkdb5-7 (<< 1.13~alpha1-1)
Description: MIT Kerberos runtime libraries - Support library
 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service.  That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains an internal runtime support library used by other
 Kerberos libraries.
Homepage: http://web.mit.edu/kerberos/

Package: libprocps6
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 96
Maintainer: Craig Small <csmall@debian.org>
Architecture: armhf
Multi-Arch: same
Source: procps
Version: 2:3.3.12-3
Replaces: procps (<< 1:3.3.2-1)
Depends: libc6 (>= 2.4), libsystemd0 (>= 209)
Description: library for accessing process information from /proc
 The libprocps library is a way of accessing information out of the /proc
 filesystem.
 .
 This package contains the shared libraries necessary to run programs
 compiled with libprocps.
Homepage: https://gitlab.com/procps-ng/procps

Package: libbz2-1.0
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 79
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: armhf
Multi-Arch: same
Source: bzip2
Version: 1.0.6-8.1
Depends: libc6 (>= 2.4)
Description: high-quality block-sorting file compressor library - runtime
 This package contains libbzip2 which is used by the bzip2 compressor.
 .
 bzip2 is a freely available, patent free, high-quality data compressor.
 It typically compresses files to within 10% to 15% of the best available
 techniques, whilst being around twice as fast at compression and six
 times faster at decompression.
 .
 bzip2 compresses files using the Burrows-Wheeler block-sorting text
 compression algorithm, and Huffman coding. Compression is generally
 considerably better than that achieved by more conventional
 LZ77/LZ78-based compressors, and approaches the performance of the PPM
 family of statistical compressors.
 .
 The archive file format of bzip2 (.bz2) is incompatible with that of its
 predecessor, bzip (.bz).
Homepage: http://www.bzip.org/

Package: ucf
Status: install ok installed
Priority: standard
Section: utils
Installed-Size: 191
Maintainer: Manoj Srivastava <srivasta@debian.org>
Architecture: all
Multi-Arch: foreign
Version: 3.0036
Depends: debconf (>= 1.5.19), coreutils (>= 5.91)
Conffiles:
 /etc/ucf.conf 5565b8b26108c49ba575ba452cd69b3e
Description: Update Configuration File(s): preserve user changes to config files
 Debian policy mandates that user changes to configuration files must be
 preserved during package upgrades. The easy way to achieve this behavior
 is to make the configuration file a 'conffile', in which case dpkg
 handles the file specially during upgrades, prompting the user as
 needed.
 .
 This is appropriate only if it is possible to distribute a default
 version that will work for most installations, although some system
 administrators may choose to modify it. This implies that the
 default version will be part of the package distribution, and must
 not be modified by the maintainer scripts during installation (or at
 any other time).
 .
 This script attempts to provide conffile-like handling for files that
 may not be labelled conffiles, and are not shipped in a Debian package,
 but handled by the postinst instead. This script allows one to
 maintain files in /etc, preserving user changes and in general
 offering the same facilities while upgrading that dpkg normally
 provides for 'conffiles'.
 .
 Additionally, this script provides facilities for transitioning a
 file that had not been provided with conffile-like protection to come
 under this schema, and attempts to minimize questions asked at
 installation time. Indeed, the transitioning facility is better than the
 one offered by dpkg while transitioning a file from a non-conffile to
 conffile status.

Package: libkmod2
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 87
Maintainer: Marco d'Itri <md@linux.it>
Architecture: armhf
Multi-Arch: same
Source: kmod
Version: 23-2
Depends: libc6 (>= 2.17)
Description: libkmod shared library
 This library provides an API for insertion, removal, configuration and
 listing of kernel modules.

Package: libxmuu1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 41
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: armhf
Multi-Arch: same
Source: libxmu
Version: 2:1.1.2-2
Depends: libc6 (>= 2.4), libx11-6
Description: X11 miscellaneous micro-utility library
 libXmuu provides a set of miscellaneous utility convenience functions for X
 libraries to use.  It is a lighter version of libXmu that does not depend
 on libXt or libXext; for more information on libXmu, see libxmu6.
 .
 More information about X.Org can be found at:
 <URL:http://www.X.org>
 .
 This module can be found at
 git://anongit.freedesktop.org/git/xorg/lib/libXmu

Package: mtd-utils
Status: install ok installed
Priority: extra
Section: utils
Installed-Size: 790
Maintainer: Riku Voipio <riku.voipio@linaro.org>
Architecture: armhf
Multi-Arch: foreign
Version: 1:2.0.0-1
Replaces: mtd-tools
Provides: mtd-tools
Depends: libc6 (>= 2.8), liblzo2-2, libuuid1 (>= 2.16), zlib1g (>= 1:1.1.4)
Description: Memory Technology Device Utilities
 Utilities for manipulating memory technology devices, such as flash
 memory, Disk-On-Chip, or ROM.  Includes mkfs.jffs2, a tool to create
 JFFS2 (journaling flash file system) filesystems.
Homepage: http://www.linux-mtd.infradead.org/

Package: libblkid1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 261
Maintainer: Debian util-linux Maintainers <ah-util-linux@debian.org>
Architecture: armhf
Multi-Arch: same
Source: util-linux
Version: 2.29.2-1
Depends: libc6 (>= 2.17), libuuid1 (>= 2.16)
Description: block device ID library
 The blkid library allows system programs such as fsck and mount to
 quickly and easily find block devices by filesystem UUID or label.
 This allows system administrators to avoid specifying filesystems by
 hard-coded device names and use a logical naming system instead.

Package: liblognorm5
Status: install ok installed
Priority: extra
Section: libs
Installed-Size: 105
Maintainer: Pierre Chifflier <pollux@debian.org>
Architecture: armhf
Multi-Arch: same
Source: liblognorm (2.0.1-1.1)
Version: 2.0.1-1.1+b1
Depends: libc6 (>= 2.8), libestr0 (>= 0.1.0), libfastjson4 (>= 0.99.3)
Description: log normalizing library
 Liblognorm is an event and log normalization library that is capable of
 real-time processing. It provides the capability to normalize events to
 a set of standard formats.
 .
 This package contains the shared library.
Homepage: http://www.liblognorm.com/

Package: libtasn1-6
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 84
Maintainer: Debian GnuTLS Maintainers <pkg-gnutls-maint@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: same
Version: 4.10-1.1
Depends: libc6 (>= 2.4)
Description: Manage ASN.1 structures (runtime)
 Manage ASN1 (Abstract Syntax Notation One) structures.
 The main features of this library are:
   * on-line ASN1 structure management that doesn't require any C code
     file generation.
   * off-line ASN1 structure management with C code file generation
     containing an array.
   * DER (Distinguish Encoding Rules) encoding
   * no limits for INTEGER and ENUMERATED values
 .
 This package contains runtime libraries.
Homepage: http://www.gnu.org/software/libtasn1/

Package: gnupg-l10n
Status: install ok installed
Priority: extra
Section: utils
Installed-Size: 4257
Maintainer: Debian GnuPG Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Source: gnupg2
Version: 2.1.18-8~deb9u1
Replaces: gnupg (<< 2.1.14-2~), gnupg2 (<< 2.1.14-2~)
Breaks: gnupg (<< 2.1.14-2~), gnupg2 (<< 2.1.14-2~)
Enhances: gnupg
Description: GNU privacy guard - localization files
 GnuPG is GNU's tool for secure communication and data storage.
 It can be used to encrypt data and to create digital signatures.
 It includes an advanced key management facility and is compliant
 with the proposed OpenPGP Internet standard as described in RFC 4880.
 .
 This package contains the translation files for the use of GnuPG in
 non-English locales.
Homepage: https://www.gnupg.org/

Package: isc-dhcp-client
Status: install ok installed
Priority: important
Section: net
Installed-Size: 480
Maintainer: Debian ISC DHCP maintainers <pkg-dhcp-devel@lists.alioth.debian.org>
Architecture: armhf
Source: isc-dhcp
Version: 4.3.5-3
Provides: dhcp-client
Depends: libc6 (>= 2.15), libdns-export162, libisc-export160, debianutils (>= 2.8.2), iproute2
Recommends: isc-dhcp-common
Suggests: resolvconf, avahi-autoipd, isc-dhcp-client-ddns
Conffiles:
 /etc/dhcp/debug 521717b5f9e08db15893d3d062c59aeb
 /etc/dhcp/dhclient-exit-hooks.d/rfc3442-classless-routes 95e21c32fa7f603db75f1dc33db53cf5
 /etc/dhcp/dhclient.conf 649563ef7a61912664a400a5263958a6
Description: DHCP client for automatically obtaining an IP address
 This is the Internet Software Consortium's DHCP client.
 .
 Dynamic Host Configuration Protocol (DHCP) is a protocol like BOOTP
 (actually dhcpd includes much of the functionality of bootpd). It
 gives client machines "leases" for IP addresses and can
 automatically set their network configuration. If your machine
 depends on DHCP (especially likely if it's a workstation on a large
 network, or a laptop, or attached to a cable modem), keep this or
 another DHCP client installed.
 .
 Extra documentation can be found in the package isc-dhcp-common.
Homepage: http://www.isc.org

Package: lsb-base
Status: install ok installed
Priority: required
Section: misc
Installed-Size: 49
Maintainer: Debian LSB Team <debian-lsb@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Source: lsb
Version: 9.20161125
Description: Linux Standard Base init script functionality
 The Linux Standard Base (http://www.linuxbase.org/) is a standard
 core system that third-party applications written for Linux can
 depend upon.
 .
 This package only includes the init-functions shell library, which
 may be used by other packages' initialization scripts for console
 logging and other purposes.
Homepage: http://www.linuxfoundation.org/collaborate/workgroups/lsb

Package: libhogweed4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 179
Maintainer: Magnus Holmgren <holmgren@debian.org>
Architecture: armhf
Multi-Arch: same
Source: nettle (3.3-1)
Version: 3.3-1+b2
Depends: libc6 (>= 2.4), libgmp10 (>= 2:6.0.0), libnettle6 (= 3.3-1+b2)
Description: low level cryptographic library (public-key cryptos)
 Nettle is a cryptographic library that is designed to fit easily in more or
 less any context: In crypto toolkits for object-oriented languages (C++,
 Python, Pike, ...), in applications like LSH or GNUPG, or even in kernel
 space.
 .
 It tries to solve a problem of providing a common set of cryptographic
 algorithms for higher-level applications by implementing a
 context-independent set of cryptographic algorithms. In that light, Nettle
 doesn't do any memory allocation or I/O, it simply provides the
 cryptographic algorithms for the application to use in any environment and
 in any way it needs.
 .
 This package contains the asymmetric cryptographic algorithms, which,
 require the GNU multiple precision arithmetic library (libgmp) for
 their large integer computations.
Homepage: http://www.lysator.liu.se/~nisse/nettle/

Package: procps
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 551
Maintainer: Craig Small <csmall@debian.org>
Architecture: armhf
Multi-Arch: foreign
Version: 2:3.3.12-3
Provides: watch
Depends: libc6 (>= 2.15), libncurses5 (>= 6), libncursesw5 (>= 6), libprocps6, libtinfo5 (>= 6), lsb-base (>= 3.0-10), init-system-helpers (>= 1.29~)
Recommends: psmisc
Breaks: guymager (<= 0.5.9-1), open-vm-tools (<= 2011.12.20-562307-1)
Conflicts: pgrep (<< 3.3-5), w-bassman (<< 1.0-3)
Conffiles:
 /etc/init.d/procps 49fbfd237be2a2f09576f1f9374580be
 /etc/sysctl.conf 36547fde818f251846b0198564060927
 /etc/sysctl.d/README.sysctl 026e08987e39bd612ae311f2d9fc2089
Description: /proc file system utilities
 This package provides command line and full screen utilities for browsing
 procfs, a "pseudo" file system dynamically generated by the kernel to
 provide information about the status of entries in its process table
 (such as whether the process is running, stopped, or a "zombie").
 .
 It contains free, kill, pkill, pgrep, pmap, ps, pwdx, skill, slabtop,
 snice, sysctl, tload, top, uptime, vmstat, w, and watch.
Homepage: https://gitlab.com/procps-ng/procps

Package: libgssapi-krb5-2
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 293
Maintainer: Sam Hartman <hartmans@debian.org>
Architecture: armhf
Multi-Arch: same
Source: krb5
Version: 1.15-1+deb9u1
Depends: libc6 (>= 2.8), libcomerr2 (>= 1.34), libk5crypto3 (>= 1.8+dfsg), libkeyutils1 (>= 1.4), libkrb5-3 (= 1.15-1+deb9u1), libkrb5support0 (>= 1.15~beta1)
Suggests: krb5-doc, krb5-user
Breaks: libgssglue1 (<< 0.2-2)
Conffiles:
 /etc/gss/mech.d/README 27e753ba1dc72900d2892b8efef6e35e
Description: MIT Kerberos runtime libraries - krb5 GSS-API Mechanism
 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service.  That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains the runtime library for the MIT Kerberos
 implementation of GSS-API used by applications and Kerberos clients.
Homepage: http://web.mit.edu/kerberos/

Package: xauth
Status: install ok installed
Priority: optional
Section: x11
Installed-Size: 65
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: armhf
Source: xauth (1:1.0.9-1)
Version: 1:1.0.9-1+b2
Depends: libc6 (>= 2.4), libx11-6, libxau6, libxext6, libxmuu1
Description: X authentication utility
 xauth is a small utility to read and manipulate Xauthority files, which
 are used by servers and clients alike to control authentication and access
 to X sessions.

Package: libgpg-error0
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 543
Maintainer: Debian GnuPG Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: same
Source: libgpg-error
Version: 1.26-2
Depends: libc6 (>= 2.15)
Description: library for common error values and messages in GnuPG components
 Library that defines common error values for all GnuPG
 components.  Among these are GPG, GPGSM, GPGME, GPG-Agent, libgcrypt,
 pinentry, SmartCard Daemon and possibly more in the future.
Homepage: https://www.gnupg.org/related_software/libgpg-error/

Package: libssl1.0.2
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 1999
Maintainer: Debian OpenSSL Team <pkg-openssl-devel@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: same
Source: openssl1.0
Version: 1.0.2l-2+deb9u2
Depends: libc6 (>= 2.16), debconf (>= 0.5) | debconf-2.0
Description: Secure Sockets Layer toolkit - shared libraries
 This package is part of the OpenSSL project's implementation of the SSL
 and TLS cryptographic protocols for secure communication over the
 Internet.
 .
 It provides the libssl and libcrypto shared libraries.
Homepage: https://www.openssl.org

Package: nano
Status: install ok installed
Priority: important
Section: editors
Installed-Size: 1977
Maintainer: Jordi Mallach <jordi@debian.org>
Architecture: armhf
Version: 2.7.4-1
Replaces: pico
Provides: editor
Depends: libc6 (>= 2.4), libncursesw5 (>= 6), libtinfo5 (>= 6), zlib1g (>= 1:1.1.4)
Suggests: spell
Conflicts: pico
Conffiles:
 /etc/nanorc 6588e341cab04ea968b003c0ad862880
Description: small, friendly text editor inspired by Pico
 GNU nano is an easy-to-use text editor originally designed as a replacement
 for Pico, the ncurses-based editor from the non-free mailer package Pine
 (itself now available under the Apache License as Alpine).
 .
 However, GNU nano also implements many features missing in pico, including:
  - feature toggles;
  - interactive search and replace (with regular expression support);
  - go to line (and column) command;
  - auto-indentation and color syntax-highlighting;
  - filename tab-completion and support for multiple buffers;
  - full internationalization support.
Homepage: https://www.nano-editor.org/

Package: base-files
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 333
Maintainer: Santiago Vila <sanvila@debian.org>
Architecture: armhf
Multi-Arch: foreign
Version: 9.9+deb9u3
Replaces: base, dpkg (<= 1.15.0), miscutils
Provides: base
Pre-Depends: awk
Breaks: initscripts (<< 2.88dsf-13.3), sendfile (<< 2.1b.20080616-5.2~)
Conffiles:
 /etc/debian_version 496561eb6c2efb8c1037dba9aa049757
 /etc/dpkg/origins/debian 731423fa8ba067262f8ef37882d1e742
 /etc/host.conf 4eb63731c9f5e30903ac4fc07a7fe3d6
 /etc/issue 62dc6d46260360d4299e3a931afbdce5
 /etc/issue.net 6589b08348fd877fd34398489f62caf0
 /etc/update-motd.d/10-uname 9e1b832b7b06f566156e7c9e0548247b
Description: Debian base system miscellaneous files
 This package contains the basic filesystem hierarchy of a Debian system, and
 several important miscellaneous files, such as /etc/debian_version,
 /etc/host.conf, /etc/issue, /etc/motd, /etc/profile, and others,
 and the text of several common licenses in use on Debian systems.

Package: libgmp10
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 334
Maintainer: Debian Science Team <debian-science-maintainers@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: same
Source: gmp
Version: 2:6.1.2+dfsg-1
Depends: libc6 (>= 2.7)
Description: Multiprecision arithmetic library
 GNU MP is a programmer's library for arbitrary precision
 arithmetic (ie, a bignum package).  It can operate on signed
 integer, rational, and floating point numeric types.
 .
 It has a rich set of functions, and the functions have a regular
 interface.
Homepage: http://gmplib.org/

Package: sensible-utils
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 62
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: all
Multi-Arch: foreign
Version: 0.0.9+deb9u1
Replaces: debianutils (<= 2.32.3), manpages-pl (<= 20060617-3~)
Description: Utilities for sensible alternative selection
 This package provides a number of small utilities which are used
 by programs to sensibly select and spawn an appropriate browser,
 editor, or pager.
 .
 The specific utilities included are: sensible-browser sensible-editor
 sensible-pager

Package: libisc-export95
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 241
Maintainer: LaMont Jones <lamont@debian.org>
Architecture: armhf
Source: bind9
Version: 1:9.9.5.dfsg-9+deb8u6
Depends: libc6 (>= 2.15)
Pre-Depends: multiarch-support
Description: Exported ISC Shared Library
 The Berkeley Internet Name Domain (BIND) implements an Internet domain
 name server.  BIND is the most widely-used name server software on the
 Internet, and is supported by the Internet Software Consortium, www.isc.org.
 .
 This package delivers the exported libisc shared library.

Package: passwd
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 1979
Maintainer: Shadow package maintainers <pkg-shadow-devel@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: foreign
Source: shadow
Version: 1:4.4-4.1
Replaces: manpages-tr (<< 1.0.5), manpages-zh (<< 1.5.1-1)
Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.8), libpam0g (>= 0.99.7.1), libselinux1 (>= 1.32), libsemanage1 (>= 2.0.3), libpam-modules
Conffiles:
 /etc/cron.daily/passwd db990990933b6f56322725223f13c2bc
 /etc/default/useradd cc9f9a7713ab62a32cd38363d958f396
 /etc/pam.d/chfn 4d466e00a348ba426130664d795e8afa
 /etc/pam.d/chpasswd 9900720564cb4ee98b7da29e2d183cb2
 /etc/pam.d/chsh a6e9b589e90009334ffd030d819290a6
 /etc/pam.d/newusers 1454e29bfa9f2a10836563e76936cea5
 /etc/pam.d/passwd eaf2ad85b5ccd06cceb19a3e75f40c63
Description: change and administer password and group data
 This package includes passwd, chsh, chfn, and many other programs to
 maintain password and group data.
 .
 Shadow passwords are supported.  See /usr/share/doc/passwd/README.Debian
Homepage: https://github.com/shadow-maint/shadow

Package: init-system-helpers
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 131
Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 1.48
Replaces: sysv-rc (<< 2.88dsf-59.3~), sysvinit-utils (<< 2.88dsf-59.3)
Depends: perl-base (>= 5.20.1-3)
Breaks: systemd (<< 44-12), sysvinit-utils (<< 2.88dsf-59.3~)
Conflicts: file-rc (<< 0.8.17~), openrc (<= 0.18.3-1)
Description: helper tools for all init systems
 This package contains helper tools that are necessary for switching between
 the various init systems that Debian contains (e. g. sysvinit or
 systemd). An example is deb-systemd-helper, a script that enables systemd unit
 files without depending on a running systemd.
 .
 It also includes the "service", "invoke-rc.d", and "update-rc.d" scripts which
 provide an abstraction for enabling, disabling, starting, and stopping
 services for all supported Debian init systems as specified by the policy.
 .
 While this package is maintained by pkg-systemd-maintainers, it is NOT
 specific to systemd at all. Maintainers of other init systems are welcome to
 include their helpers in this package.

Package: openssh-server
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 705
Maintainer: Debian OpenSSH Maintainers <debian-ssh@lists.debian.org>
Architecture: armhf
Multi-Arch: foreign
Source: openssh
Version: 1:7.4p1-10+deb9u2
Replaces: ssh, ssh-krb5
Provides: ssh-server
Depends: adduser (>= 3.9), dpkg (>= 1.9.0), libpam-modules (>= 0.72-9), libpam-runtime (>= 0.76-14), lsb-base (>= 4.1+Debian3), openssh-client (= 1:7.4p1-10+deb9u2), openssh-sftp-server, procps, ucf (>= 0.28), debconf (>= 0.5) | debconf-2.0, init-system-helpers (>= 1.18~), libaudit1 (>= 1:2.2.1), libc6 (>= 2.17), libcomerr2 (>= 1.01), libgssapi-krb5-2 (>= 1.14+dfsg), libkrb5-3 (>= 1.13~alpha1+dfsg), libpam0g (>= 0.99.7.1), libselinux1 (>= 1.32), libssl1.0.2 (>= 1.0.2d), libsystemd0, libwrap0 (>= 7.6-4~), zlib1g (>= 1:1.1.4)
Recommends: libpam-systemd, ncurses-term, xauth
Suggests: molly-guard, monkeysphere, rssh, ssh-askpass, ufw
Conflicts: sftp, ssh-socks, ssh2
Conffiles:
 /etc/default/ssh 500e3cf069fe9a7b9936108eb9d9c035
 /etc/init.d/ssh 338975eb635877703fc066e005f916d9
 /etc/init/ssh.conf 6cd55bc913a37a11a5599c4850f865e5
 /etc/network/if-up.d/openssh-server 12a34c77b9032e5b23a63782fcc03fef
 /etc/pam.d/sshd 8b4c7a12b031424b2a9946881da59812
 /etc/ufw/applications.d/openssh-server 486b78d54b93cc9fdc950c1d52ff479e
Description: secure shell (SSH) server, for secure access from remote machines
 This is the portable version of OpenSSH, a free implementation of
 the Secure Shell protocol as specified by the IETF secsh working
 group.
 .
 Ssh (Secure Shell) is a program for logging into a remote machine
 and for executing commands on a remote machine.
 It provides secure encrypted communications between two untrusted
 hosts over an insecure network. X11 connections and arbitrary TCP/IP
 ports can also be forwarded over the secure channel.
 It can be used to provide applications with a secure communication
 channel.
 .
 This package provides the sshd server.
 .
 In some countries it may be illegal to use any encryption at all
 without a special permit.
 .
 sshd replaces the insecure rshd program, which is obsolete for most
 purposes.
Homepage: http://www.openssh.com/

Package: openssh-sftp-server
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 73
Maintainer: Debian OpenSSH Maintainers <debian-ssh@lists.debian.org>
Architecture: armhf
Source: openssh
Version: 1:7.4p1-10+deb9u2
Replaces: openssh-server (<< 1:6.5p1-5)
Depends: openssh-client (= 1:7.4p1-10+deb9u2), libc6 (>= 2.17)
Recommends: openssh-server | ssh-server
Breaks: openssh-server (<< 1:6.5p1-5)
Enhances: openssh-server, ssh-server
Description: secure shell (SSH) sftp server module, for SFTP access from remote machines
 This is the portable version of OpenSSH, a free implementation of
 the Secure Shell protocol as specified by the IETF secsh working
 group.
 .
 Ssh (Secure Shell) is a program for logging into a remote machine
 and for executing commands on a remote machine.
 It provides secure encrypted communications between two untrusted
 hosts over an insecure network. X11 connections and arbitrary TCP/IP
 ports can also be forwarded over the secure channel.
 It can be used to provide applications with a secure communication
 channel.
 .
 This package provides the SFTP server module for the SSH server. It
 is needed if you want to access your SSH server with SFTP. The SFTP
 server module also works with other SSH daemons like dropbear.
 .
 OpenSSH's sftp and sftp-server implement revision 3 of the SSH filexfer
 protocol described in:
 .
  http://www.openssh.com/txt/draft-ietf-secsh-filexfer-02.txt
 .
 Newer versions of the draft will not be supported, though some features
 are individually implemented as extensions.
Homepage: http://www.openssh.com/

Package: ncurses-base
Essential: yes
Status: install ok installed
Priority: required
Section: misc
Installed-Size: 340
Maintainer: Craig Small <csmall@debian.org>
Architecture: all
Multi-Arch: foreign
Source: ncurses
Version: 6.0+20161126-1+deb9u1
Provides: ncurses-runtime
Breaks: ncurses-term (<< 5.7+20100313-3)
Conffiles:
 /etc/terminfo/README 45b6df19fb5e21f55717482fa7a30171
Description: basic terminal type definitions
 The ncurses library routines are a terminal-independent method of
 updating character screens with reasonable optimization.
 .
 This package contains terminfo data files to support the most common types of
 terminal, including ansi, dumb, linux, rxvt, screen, sun, vt100, vt102, vt220,
 vt52, and xterm.
Homepage: http://invisible-island.net/ncurses/

Package: krb5-locales
Status: install ok installed
Priority: standard
Section: localization
Installed-Size: 302
Maintainer: Sam Hartman <hartmans@debian.org>
Architecture: all
Multi-Arch: foreign
Source: krb5
Version: 1.15-1+deb9u1
Description: internationalization support for MIT Kerberos
 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service.  That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains internationalized messages for MIT Kerberos.
Homepage: http://web.mit.edu/kerberos/

Package: libc-bin
Essential: yes
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 2802
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Architecture: armhf
Multi-Arch: foreign
Source: glibc
Version: 2.24-11+deb9u1
Depends: libc6 (>> 2.24), libc6 (<< 2.25)
Recommends: manpages
Conffiles:
 /etc/bindresvport.blacklist 4c09213317e4e3dd3c71d74404e503c5
 /etc/default/nss d6d5d6f621fb3ead2548076ce81e309c
 /etc/gai.conf 28fa76ff5a9e0566eaa1e11f1ce51f09
 /etc/ld.so.conf 4317c6de8564b68d628c21efa96b37e4
 /etc/ld.so.conf.d/libc.conf d4d833fd095fb7b90e1bb4a547f16de6
Description: GNU C Library: Binaries
 This package contains utility programs related to the GNU C Library.
 .
  * catchsegv: catch segmentation faults in programs
  * getconf: query system configuration variables
  * getent: get entries from administrative databases
  * iconv, iconvconfig: convert between character encodings
  * ldd, ldconfig: print/configure shared library dependencies
  * locale, localedef: show/generate locale definitions
  * tzselect, zdump, zic: select/dump/compile time zones
Homepage: http://www.gnu.org/software/libc/libc.html

Package: libsemanage1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 200
Maintainer: Debian SELinux maintainers <selinux-devel@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: same
Source: libsemanage
Version: 2.6-2
Depends: libsemanage-common (= 2.6-2), libaudit1 (>= 1:2.2.1), libbz2-1.0, libc6 (>= 2.8), libselinux1 (>= 2.6), libsepol1 (>= 2.6), libustr-1.0-1 (>= 1.0.4)
Breaks: policycoreutils (<< 2.4), selinux-policy-default (<< 2:2.20140421-10~), selinux-policy-mls (<< 2:2.20140421-10~)
Description: SELinux policy management library
 This package provides the shared libraries for SELinux policy management.
 It uses libsepol for binary policy manipulation and libselinux for
 interacting with the SELinux system.  It also exec's helper programs
 for loading policy and for checking whether the file_contexts
 configuration is valid (load_policy and setfiles from
 policycoreutils) presently, although this may change at least for the
 bootstrapping case
 .
 Security-enhanced Linux is a patch of the Linux kernel and a
 number of utilities with enhanced security functionality designed to
 add mandatory access controls to Linux.  The Security-enhanced Linux
 kernel contains new architectural components originally developed to
 improve the security of the Flask operating system. These
 architectural components provide general support for the enforcement
 of many kinds of mandatory access control policies, including those
 based on the concepts of Type Enforcement, Role-based Access
 Control, and Multi-level Security.
Homepage: http://userspace.selinuxproject.org/

Package: ntpdate
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 139
Maintainer: Debian NTP Team <pkg-ntp-maintainers@lists.alioth.debian.org>
Architecture: armhf
Source: ntp
Version: 1:4.2.8p10+dfsg-3+deb9u1
Depends: netbase, libc6 (>= 2.17), libssl1.1 (>= 1.1.0)
Pre-Depends: dpkg (>= 1.15.7.2)
Breaks: dhcp3-client (<< 4.1.0-1)
Conffiles:
 /etc/default/ntpdate 71d857cae72ae1f53380ea4f2e38cb2e
 /etc/dhcp/dhclient-exit-hooks.d/ntpdate cb47fd9d3e21a204fb3ba4ca3fc8ab46
 /etc/logcheck/ignore.d.server/ntpdate 68d4df7cceb0e97bde87126c3a56b219
 /etc/network/if-up.d/ntpdate ed06d5e57fe9ae0b17fe1f9cea1c0d57
Description: client for setting system time from NTP servers
 NTP, the Network Time Protocol, is used to keep computer clocks
 accurate by synchronizing them over the Internet or a local network,
 or by following an accurate hardware receiver that interprets GPS,
 DCF-77, NIST or similar time signals.
 .
 ntpdate is a simple NTP client that sets a system's clock to match
 the time obtained by communicating with one or more NTP servers.  It
 is not sufficient, however, for maintaining an accurate clock in the
 long run.  ntpdate by itself is useful for occasionally setting the
 time on machines that do not have full-time network access, such as
 laptops.
 .
 If the full NTP daemon from the package "ntp" is installed, then
 ntpdate is not necessary.
Homepage: http://support.ntp.org/

Package: publicsuffix
Status: install ok installed
Priority: extra
Section: net
Installed-Size: 278
Maintainer: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
Architecture: all
Multi-Arch: foreign
Version: 20171028.2055-0+deb9u1
Provides: publicsuffix-dafsa
Description: accurate, machine-readable list of domain name suffixes
 A machine-readable list of domain name suffixes that accept public
 registration.  Each suffix represents the part of a domain name which
 is not under the control of the individual registrant, which makes
 the list useful for grouping cookies, deciding same-origin policies,
 collating spam, and other activities.
Homepage: https://publicsuffix.org

Package: libseccomp2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 144
Maintainer: Kees Cook <kees@debian.org>
Architecture: armhf
Multi-Arch: same
Source: libseccomp
Version: 2.3.1-2.1
Depends: libc6 (>= 2.4)
Description: high level interface to Linux seccomp filter
 This library provides a high level interface to constructing, analyzing
 and installing seccomp filters via a BPF passed to the Linux Kernel's
 prctl() syscall.
Homepage: https://github.com/seccomp/libseccomp

Package: libxtables12
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 119
Maintainer: Arturo Borrero Gonzalez <arturo@debian.org>
Architecture: armhf
Multi-Arch: same
Source: iptables
Version: 1.6.0+snapshot20161117-6
Replaces: iptables (<< 1.4.16.3-3), libxtables11 (>= 1.6.0+snapshot20161117-1)
Depends: libc6 (>= 2.7)
Breaks: iptables (<< 1.4.16.3-3), libxtables11 (>= 1.6.0+snapshot20161117-1)
Description: netfilter xtables library
 The user-space interface to the Netfilter xtables kernel framework.
Homepage: http://www.netfilter.org/

Package: udev
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 6673
Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: foreign
Source: systemd
Version: 232-25+deb9u1
Replaces: bash-completion (<< 1:2.1), systemd (<< 232-20)
Depends: libacl1 (>= 2.2.51-8), libblkid1 (>= 2.19.1), libc6 (>= 2.17), libgcc1 (>= 1:3.5), libkmod2 (>= 5~), libselinux1 (>= 2.1.9), adduser, libudev1 (= 232-25+deb9u1), lsb-base (>= 3.0-6), util-linux (>= 2.27.1), procps
Pre-Depends: dpkg (>= 1.17.14)
Breaks: bash-completion (<< 1:2.1), consolekit (<< 0.4.6-1), ifplugd (<< 0.28-19.1~), ifupdown (<< 0.8.5~), joystick (<< 1:1.4.9-1~), kmod (<< 14), plymouth (<< 0.9.0-7), systemd (<< 232-20), usb-modeswitch (<< 2.3.0+repack0-1~)
Conflicts: hal
Conffiles:
 /etc/init.d/udev e4da2ae5c153148fad0b3f6e5e7ce61e
 /etc/init/udev.conf 41c0081f3a830e0902aaff76a53edf98
 /etc/init/udevmonitor.conf ec187fc822d47c41416e7c531c8c48dd
 /etc/init/udevtrigger.conf 651ff2421dde80be7ce7ccbf7fa8cf18
 /etc/udev/udev.conf a9c43ddab6e58eefa56db50ff44b2b46
Description: /dev/ and hotplug management daemon
 udev is a daemon which dynamically creates and removes device nodes from
 /dev/, handles hotplug events and loads drivers at boot time.
Homepage: https://www.freedesktop.org/wiki/Software/systemd

Package: libunistring0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 995
Maintainer: Andreas Rottmann <rotty@debian.org>
Architecture: armhf
Multi-Arch: same
Source: libunistring
Version: 0.9.6+really0.9.3-0.1
Depends: libc6 (>= 2.4)
Description: Unicode string library for C
 The 'libunistring' library implements Unicode strings (in the UTF-8,
 UTF-16, and UTF-32 encodings), together with functions for Unicode
 characters (character names, classifications, properties) and
 functions for string processing (formatted output, width, word
 breaks, line breaks, normalization, case folding, regular
 expressions).
 .
 This package contains the shared library.
Homepage: http://www.gnu.org/software/libunistring/

Package: libnettle4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 263
Maintainer: Magnus Holmgren <holmgren@debian.org>
Architecture: armhf
Multi-Arch: same
Source: nettle
Version: 2.7.1-5+deb8u1
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Description: low level cryptographic library (symmetric and one-way cryptos)
 Nettle is a cryptographic library that is designed to fit easily in more or
 less any context: In crypto toolkits for object-oriented languages (C++,
 Python, Pike, ...), in applications like LSH or GNUPG, or even in kernel
 space.
 .
 It tries to solve a problem of providing a common set of cryptographic
 algorithms for higher-level applications by implementing a
 context-independent set of cryptographic algorithms. In that light, Nettle
 doesn't do any memory allocation or I/O, it simply provides the
 cryptographic algorithms for the application to use in any environment and
 in any way it needs.
 .
 This package contains the symmetric and one-way cryptographic
 algorithms. To avoid having this package depend on libgmp, the
 asymmetric cryptos reside in a separate library, libhogweed.
Homepage: http://www.lysator.liu.se/~nisse/nettle/

Package: libapparmor1
Status: install ok installed
Priority: extra
Section: libs
Installed-Size: 118
Maintainer: Debian AppArmor Team <pkg-apparmor-team@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: same
Source: apparmor
Version: 2.11.0-3
Depends: libc6 (>= 2.17)
Description: changehat AppArmor library
 This package provides the shared library used for making use of the
 AppArmor profile and changehat functionality, as well as common log
 parsing routines.
Homepage: http://apparmor.net/

Package: iptables
Status: install ok installed
Priority: important
Section: net
Installed-Size: 1113
Maintainer: Arturo Borrero Gonzalez <arturo@debian.org>
Architecture: armhf
Multi-Arch: foreign
Version: 1.6.0+snapshot20161117-6
Depends: libip4tc0 (= 1.6.0+snapshot20161117-6), libip6tc0 (= 1.6.0+snapshot20161117-6), libiptc0 (= 1.6.0+snapshot20161117-6), libxtables12 (= 1.6.0+snapshot20161117-6), libc6 (>= 2.7), libnetfilter-conntrack3, libnfnetlink0
Suggests: kmod
Description: administration tools for packet filtering and NAT
 iptables is the userspace command line program used to configure
 the Linux packet filtering ruleset. It is targeted towards system
 administrators. Since Network Address Translation is also configured
 from the packet filter ruleset, iptables is used for this, too. The
 iptables package also includes ip6tables. ip6tables is used for
 configuring the IPv6 packet filter
Homepage: http://www.netfilter.org/

Package: libldap-2.4-2
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 367
Maintainer: Debian OpenLDAP Maintainers <pkg-openldap-devel@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: same
Source: openldap
Version: 2.4.44+dfsg-5+deb9u1
Replaces: libldap-2.3-0, libldap2
Depends: libc6 (>= 2.12), libgnutls30 (>= 3.5.6), libsasl2-2, libldap-common (>= 2.4.44+dfsg-5+deb9u1)
Conflicts: ldap-utils (<= 2.1.23-1)
Description: OpenLDAP libraries
 These are the run-time libraries for the OpenLDAP (Lightweight Directory
 Access Protocol) servers and clients.
Homepage: http://www.openldap.org/

Package: libssl1.1
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 2173
Maintainer: Debian OpenSSL Team <pkg-openssl-devel@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: same
Source: openssl
Version: 1.1.0f-3+deb9u1
Depends: libc6 (>= 2.16), debconf (>= 0.5) | debconf-2.0
Breaks: salt-common (<= 2016.3.3+ds-3)
Description: Secure Sockets Layer toolkit - shared libraries
 This package is part of the OpenSSL project's implementation of the SSL
 and TLS cryptographic protocols for secure communication over the
 Internet.
 .
 It provides the libssl and libcrypto shared libraries.
Homepage: https://www.openssl.org/

Package: sysvinit-utils
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 100
Maintainer: Debian sysvinit maintainers <pkg-sysvinit-devel@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: foreign
Source: sysvinit
Version: 2.88dsf-59.9
Replaces: initscripts (<< 2.88dsf-59.5)
Depends: libc6 (>= 2.4), init-system-helpers (>= 1.25~), util-linux (>> 2.28-2~)
Breaks: systemd (<< 215)
Description: System-V-like utilities
 This package contains the important System-V-like utilities.
 .
 Specifically, this package includes:
 killall5, pidof
Homepage: http://savannah.nongnu.org/projects/sysvinit

Package: debian-archive-keyring
Status: install ok installed
Priority: important
Section: misc
Installed-Size: 118
Maintainer: Debian Release Team <packages@release.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 2017.5
Depends: gpgv
Recommends: gnupg
Breaks: apt (<< 0.7.25.1)
Conffiles:
 /etc/apt/trusted.gpg.d/debian-archive-jessie-automatic.gpg 548a861c55fdf06fb9b0419c30cd33ec
 /etc/apt/trusted.gpg.d/debian-archive-jessie-security-automatic.gpg 28ffc0824518a9d42fb40e5caad7c5ef
 /etc/apt/trusted.gpg.d/debian-archive-jessie-stable.gpg 3cf5c69a2532cc3a3cba6c5bcf02cb7b
 /etc/apt/trusted.gpg.d/debian-archive-stretch-automatic.gpg c82e16869fb2d6234aff8b63fa00fb65
 /etc/apt/trusted.gpg.d/debian-archive-stretch-security-automatic.gpg 9fcd290147d1ed6b6768c1d1163f1383
 /etc/apt/trusted.gpg.d/debian-archive-stretch-stable.gpg 829333ce438185f23bd9c122a19ef25d
 /etc/apt/trusted.gpg.d/debian-archive-wheezy-automatic.gpg e5d3c1f7461bc12685f9b331c60beadd
 /etc/apt/trusted.gpg.d/debian-archive-wheezy-stable.gpg 722258fff5af68c002429c4433bd228b
Description: GnuPG archive keys of the Debian archive
 The Debian project digitally signs its Release files. This package
 contains the archive keys used for that.

Package: libtext-iconv-perl
Status: install ok installed
Priority: required
Section: perl
Installed-Size: 41
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: armhf
Source: libtext-iconv-perl (1.7-5)
Version: 1.7-5+b4
Depends: libc6 (>= 2.4), perl-base (>= 5.24.1~rc3-2), perlapi-5.24.1
Description: converts between character sets in Perl
 The iconv() family of functions from XPG4 defines an API for converting
 between character sets (e.g. UTF-8 to Latin1, EBCDIC to ASCII). They
 are provided by libc6.
 .
 This package allows access to them from Perl via the Text::Iconv
 package.
Homepage: http://search.cpan.org/search?module=Text::Iconv

Package: libapt-inst1.5
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 331
Maintainer: APT Development Team <deity@lists.debian.org>
Architecture: armhf
Multi-Arch: same
Source: apt
Version: 1.0.9.8.3
Depends: libapt-pkg4.12 (>= 0.8.16~exp9), libc6 (>= 2.4), libgcc1 (>= 1:4.4.0), libstdc++6 (>= 4.4.0)
Pre-Depends: multiarch-support
Description: deb package format runtime library
 This library provides methods to query and extract information
 from deb packages. This includes the control data and the package
 file content.

Package: libc-l10n
Status: install ok installed
Priority: standard
Section: localization
Installed-Size: 4210
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Source: glibc
Version: 2.24-11+deb9u1
Replaces: locales (<< 2.21-1)
Breaks: locales (<< 2.21-1)
Description: GNU C Library: localization files
 This package contains the translation files for the GNU C library and
 utility programs.
Homepage: http://www.gnu.org/software/libc/libc.html

Package: libtext-wrapi18n-perl
Status: install ok installed
Priority: required
Section: perl
Installed-Size: 26
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: all
Version: 0.06-7.1
Depends: libtext-charwidth-perl
Description: internationalized substitute of Text::Wrap
 This module is a substitution for Text::Wrap, supporting
 multibyte characters such as UTF-8, EUC-JP, and GB2312, fullwidth
 characters such as east Asian characters, combining characters
 such as diacritical marks and Thai, and languages which don't
 use whitespaces between words such as Chinese and Japanese.
 .
 It provides wrap().
Homepage: http://search.cpan.org/search?module=Text::WrapI18N

Package: libsemanage-common
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 39
Maintainer: Debian SELinux maintainers <selinux-devel@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Source: libsemanage
Version: 2.6-2
Replaces: libsemanage1 (<= 2.0.41-1), libsemanage1-dev (<< 2.1.6-3~)
Breaks: libsemanage1 (<= 2.0.41-1), libsemanage1-dev (<< 2.1.6-3~)
Conffiles:
 /etc/selinux/semanage.conf f6f9b97af233c90ca127f406fb6f0932
Description: Common files for SELinux policy management libraries
 This package provides the common files used by the shared libraries
 for SELinux policy management.
 .
 Security-enhanced Linux is a patch of the Linux kernel and a
 number of utilities with enhanced security functionality designed to
 add mandatory access controls to Linux.  The Security-enhanced Linux
 kernel contains new architectural components originally developed to
 improve the security of the Flask operating system. These
 architectural components provide general support for the enforcement
 of many kinds of mandatory access control policies, including those
 based on the concepts of Type Enforcement, Role-based Access
 Control, and Multi-level Security.
Homepage: http://userspace.selinuxproject.org/

Package: libp11-kit0
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 275
Maintainer: Debian GnuTLS Maintainers <pkg-gnutls-maint@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: same
Source: p11-kit
Version: 0.23.3-2
Depends: libc6 (>= 2.16), libffi6 (>= 3.0.4)
Description: library for loading and coordinating access to PKCS#11 modules - runtime
 The p11-kit library provides a way to load and enumerate Public-Key
 Cryptography Standard #11 modules, along with a standard configuration
 setup for installing PKCS#11 modules so that they're discoverable. It
 also solves problems with coordinating the use of PKCS#11 by different
 components or libraries living in the same process.
 .
 This package contains the shared library required for applications loading
 and accessing PKCS#11 modules.
Homepage: http://p11-glue.freedesktop.org/p11-kit.html

Package: libgnutls-openssl27
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 216
Maintainer: Debian GnuTLS Maintainers <pkg-gnutls-maint@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: same
Source: gnutls28
Version: 3.5.8-5+deb9u3
Depends: libgnutls30 (= 3.5.8-5+deb9u3), libc6 (>= 2.4)
Description: GNU TLS library - OpenSSL wrapper
 GnuTLS is a portable library which implements the Transport Layer
 Security (TLS 1.0, 1.1, 1.2) and Secure Sockets Layer (SSL) 3.0 and Datagram
 Transport Layer Security (DTLS 1.0, 1.2) protocols.
 .
 GnuTLS features support for:
  - TLS extensions: server name indication, max record size, opaque PRF
    input, etc.
  - authentication using the SRP protocol.
  - authentication using both X.509 certificates and OpenPGP keys.
  - TLS Pre-Shared-Keys (PSK) extension.
  - Inner Application (TLS/IA) extension.
  - X.509 and OpenPGP certificate handling.
  - X.509 Proxy Certificates (RFC 3820).
  - all the strong encryption algorithms (including SHA-256/384/512 and
    Camellia (RFC 4132)).
 .
 This package contains the runtime library of the GnuTLS OpenSSL wrapper.
Homepage: http://www.gnutls.org/

Package: libdebconfclient0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 62
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Architecture: armhf
Multi-Arch: same
Source: cdebconf
Version: 0.227
Depends: libc6 (>= 2.4)
Description: Debian Configuration Management System (C-implementation library)
 Debconf is a configuration management system for Debian packages. It is
 used by some packages to prompt you for information before they are
 installed. cdebconf is a reimplementation of the original debconf in C.
 .
 This library allows C programs to interface with cdebconf.

Package: libgnutls-deb0-28
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 1386
Maintainer: Debian GnuTLS Maintainers <pkg-gnutls-maint@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: same
Source: gnutls28
Version: 3.3.8-6+deb8u3
Replaces: gnutls0, gnutls0.4, gnutls3
Depends: libc6 (>= 2.17), libgmp10 (>= 2:6), libhogweed2 (>= 2.7), libnettle4 (>= 2.7), libp11-kit0 (>= 0.20.7), libtasn1-6 (>= 4.1-0), zlib1g (>= 1:1.1.4)
Pre-Depends: multiarch-support
Suggests: gnutls-bin
Conflicts: gnutls0, gnutls0.4
Description: GNU TLS library - main runtime library
 GnuTLS is a portable library which implements the Transport Layer
 Security (TLS 1.0, 1.1, 1.2) and Secure Sockets Layer (SSL) 3.0 and Datagram
 Transport Layer Security (DTLS 1.0, 1.2) protocols.
 .
 GnuTLS features support for:
  - TLS extensions: server name indication, max record size, opaque PRF
    input, etc.
  - authentication using the SRP protocol.
  - authentication using both X.509 certificates and OpenPGP keys.
  - TLS Pre-Shared-Keys (PSK) extension.
  - Inner Application (TLS/IA) extension.
  - X.509 and OpenPGP certificate handling.
  - X.509 Proxy Certificates (RFC 3820).
  - all the strong encryption algorithms (including SHA-256/384/512 and
    Camellia (RFC 4132)).
 .
 This package contains the main runtime library.
Homepage: http://www.gnutls.org/

Package: libselinux1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 156
Maintainer: Debian SELinux maintainers <selinux-devel@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: same
Source: libselinux (2.6-3)
Version: 2.6-3+b3
Depends: libc6 (>= 2.8), libpcre3
Description: SELinux runtime shared libraries
 This package provides the shared libraries for Security-enhanced
 Linux that provides interfaces (e.g. library functions for the
 SELinux kernel APIs like getcon(), other support functions like
 getseuserbyname()) to SELinux-aware applications. Security-enhanced
 Linux is a patch of the Linux kernel and a number of utilities with
 enhanced security functionality designed to add mandatory access
 controls to Linux.  The Security-enhanced Linux kernel contains new
 architectural components originally developed to improve the security
 of the Flask operating system. These architectural components provide
 general support for the enforcement of many kinds of mandatory access
 control policies, including those based on the concepts of Type
 Enforcement, Role-based Access Control, and Multi-level Security.
 .
 libselinux1 provides an API for SELinux applications to get and set
 process and file security contexts and to obtain security policy
 decisions.  Required for any applications that use the SELinux
 API. libselinux may use the shared libsepol to manipulate the binary
 policy if necessary (e.g. to downgrade the policy format to an older
 version supported by the kernel) when loading policy.
Homepage: http://userspace.selinuxproject.org/

Package: systemd
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 6829
Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: foreign
Version: 232-25+deb9u1
Replaces: udev (<< 228-5)
Depends: libacl1 (>= 2.2.51-8), libapparmor1 (>= 2.9.0-3+exp2), libaudit1 (>= 1:2.2.1), libblkid1 (>= 2.19.1), libc6 (>= 2.17), libcap2 (>= 1:2.10), libcryptsetup4 (>= 2:1.4.3), libgcrypt20 (>= 1.7.0), libgpg-error0 (>= 1.14), libidn11 (>= 1.13), libip4tc0 (>= 1.6.0+snapshot20161117), libkmod2 (>= 5~), liblz4-1 (>= 0.0~r127), liblzma5 (>= 5.1.1alpha+20120614), libmount1 (>= 2.26.2), libpam0g (>= 0.99.7.1), libseccomp2 (>= 2.3.1), libselinux1 (>= 2.1.9), libsystemd0 (= 232-25+deb9u1), util-linux (>= 2.27.1), mount (>= 2.26), adduser, procps
Pre-Depends: libc6 (>= 2.8), libgcc1 (>= 1:3.5)
Recommends: libpam-systemd, dbus
Suggests: systemd-ui, systemd-container, policykit-1
Breaks: adjtimex (<< 1.29-6), aoetools (<< 36-1.1), apparmor (<< 2.10.95-1), arno-iptables-firewall (<< 2.0.1.f-1), atm-tools (<< 1:2.5.1-1.6), clvm (<< 2.02.156-1), cman (<< 3.1.8-1.3+rm), console-common (<< 0.7.89), ebtables (<< 2.0.10.4-3.5), eeepc-acpi-scripts (<< 1.1.12+nmu1), espeakup (<< 1:0.71-27.1), ferm (<< 2.2-3.1), fiaif (<< 1.23.1-4+rm), gfs2-cluster (<< 3.1.8-1), gfs2-utils (<< 3.1.8-1), gom (<< 0.30.2-7), hdparm (<< 9.48+ds-1), ifrename (<< 30~pre9-9), ifscheme (<< 1.7-4), ifupdown (<< 0.8.5~), ifupdown-extra (<< 0.27), ipsec-tools (<< 1:0.8.2+20140711-6), kbd (<< 2.0.3-2), keyboard-configuration (<< 1.141), laptop-mode-tools (<< 1.68~), live-tools (<< 1:20151214+nmu1), lvm2 (<< 2.02.104-1), mdadm (<< 3.4-2), mt-st (<< 1.3-1), multipath-tools (<< 0.5.0+git1.656f8865-3), natlog (<< 1.02.00-4), nbd-client (<< 1:3.14-1), netenv (<< 0.94.3-30+rm), nfs-common (<< 1:1.2.8-9.1), ocfs2-tools (<< 1.8.4-2), pidentd (<< 3.0.19.ds1-7.1), rdnssd (<< 1.0.1-5), rgmanager (<< 3.1.8-1.3+rm), rpcbind (<< 0.2.3-0.1), screen (<< 4.3.1-2), scsitools (<< 0.12-2.3), selinux-basics (<< 0.5.3), setserial (<< 2.17-49), shorewall (<< 5.0.3.1-1), shorewall-init (<< 5.0.3.1-1), shorewall-lite (<< 5.0.3.1-1), shorewall6 (<< 5.0.3.1-1), shorewall6-lite (<< 5.0.3.1-1), srptools (<< 1.0.3-1), switchconf (<< 0.0.15-1), systemd-shim (<< 10-3~), udev (<< 228-5), ufw (<< 0.34-1), virtualbox-guest-x11 (<< 5.0.12-dfsg-2), zfs-fuse (<< 0.7.0-13.1), zvbi (<< 0.2.35-10)
Conffiles:
 /etc/dbus-1/system.d/org.freedesktop.hostname1.conf f55c94d000b5d62b5f06d38852977dd1
 /etc/dbus-1/system.d/org.freedesktop.locale1.conf 5893ab03e7e96aa3759baceb4dd04190
 /etc/dbus-1/system.d/org.freedesktop.login1.conf e2c3673cc09b6340fab20b1e21e80de4
 /etc/dbus-1/system.d/org.freedesktop.network1.conf 162e9a90d8f824f79ef2c6390827ec7b
 /etc/dbus-1/system.d/org.freedesktop.resolve1.conf 6969148b4616c56a5c9065cec5ab0775
 /etc/dbus-1/system.d/org.freedesktop.systemd1.conf c93c16e793f7254a38ce54df08807954
 /etc/dbus-1/system.d/org.freedesktop.timedate1.conf 682369fbf3de26b21e775732c89a2bbe
 /etc/dhcp/dhclient-exit-hooks.d/timesyncd a891f21f45b0648b7082d999bf424591
 /etc/pam.d/systemd-user 3d97692a0125712fcfbd7ddf756f7696
 /etc/systemd/journald.conf b89a22c219efce8b3700feafc61e0c18
 /etc/systemd/logind.conf aeeac805b4bfb7450183ce346999dd38
 /etc/systemd/resolved.conf 6fcc0661ab26fdea8fc71c7af82e5fa9
 /etc/systemd/system.conf adc308320471c75a60e07184cf2ebb05
 /etc/systemd/timesyncd.conf 54914cf38ff3b8f7dc81b87bb3849520
 /etc/systemd/user.conf 675370e2d80a4ad957202e68c1b4aaee
Description: system and service manager
 systemd is a system and service manager for Linux. It provides aggressive
 parallelization capabilities, uses socket and D-Bus activation for starting
 services, offers on-demand starting of daemons, keeps track of processes using
 Linux control groups, maintains mount and automount points and implements an
 elaborate transactional dependency-based service control logic.
 .
 systemd is compatible with SysV and LSB init scripts and can work as a
 drop-in replacement for sysvinit.
 .
 Installing the systemd package will not switch your init system unless you
 boot with init=/bin/systemd or install systemd-sysv in addition.
Homepage: https://www.freedesktop.org/wiki/Software/systemd

Package: dpkg
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 6364
Origin: debian
Maintainer: Dpkg Developers <debian-dpkg@lists.debian.org>
Bugs: debbugs://bugs.debian.org
Architecture: armhf
Multi-Arch: foreign
Version: 1.18.24
Replaces: manpages-it (<< 2.80-4)
Depends: tar (>= 1.28-1)
Pre-Depends: libbz2-1.0, libc6 (>= 2.11), liblzma5 (>= 5.2.2), libselinux1 (>= 2.3), zlib1g (>= 1:1.1.4)
Suggests: apt, debsig-verify
Breaks: acidbase (<= 1.4.5-4), amule (<< 2.3.1+git1a369e47-3), beep (<< 1.3-4), im (<< 1:151-4), libdpkg-perl (<< 1.18.11), netselect (<< 0.3.ds1-27), pconsole (<< 1.0-12), phpgacl (<< 3.3.7-7.3), pure-ftpd (<< 1.0.43-1), systemtap (<< 2.8-1), terminatorx (<< 4.0.1-1), xvt (<= 2.1-20.1)
Conffiles:
 /etc/alternatives/README 69c4ba7f08363e998e0f2e244a04f881
 /etc/cron.daily/dpkg b8065b6bfc248caba501c3f5bb508e66
 /etc/dpkg/dpkg.cfg f4413ffb515f8f753624ae3bb365b81b
 /etc/logrotate.d/dpkg 782ea5ae536f67ff51dc8c3e2eeb4cf9
Description: Debian package management system
 This package provides the low-level infrastructure for handling the
 installation and removal of Debian software packages.
 .
 For Debian package development tools, install dpkg-dev.
Homepage: https://wiki.debian.org/Teams/Dpkg

Package: wget
Status: install ok installed
Priority: important
Section: web
Installed-Size: 2618
Maintainer: Noël Köthe <noel@debian.org>
Architecture: armhf
Multi-Arch: foreign
Version: 1.18-5+deb9u1
Depends: libc6 (>= 2.17), libgnutls30 (>= 3.5.6), libidn11 (>= 1.13), libnettle6, libpcre3, libpsl5 (>= 0.13.0), libuuid1 (>= 2.16), zlib1g (>= 1:1.1.4)
Recommends: ca-certificates
Conflicts: wget-ssl
Conffiles:
 /etc/wgetrc c43064699caf6109f4b3da0405c06ebb
Description: retrieves files from the web
 Wget is a network utility to retrieve files from the web
 using HTTP(S) and FTP, the two most widely used internet
 protocols. It works non-interactively, so it will work in
 the background, after having logged off. The program supports
 recursive retrieval of web-authoring pages as well as FTP
 sites -- you can use Wget to make mirrors of archives and
 home pages or to travel the web like a WWW robot.
 .
 Wget works particularly well with slow or unstable connections
 by continuing to retrieve a document until the document is fully
 downloaded. Re-getting files from where it left off works on
 servers (both HTTP and FTP) that support it. Both HTTP and FTP
 retrievals can be time stamped, so Wget can see if the remote
 file has changed since the last retrieval and automatically
 retrieve the new version if it has.
 .
 Wget supports proxy servers; this can lighten the network load,
 speed up retrieval, and provide access behind firewalls.
Homepage: https://www.gnu.org/software/wget/

Package: vim-common
Status: install ok installed
Priority: important
Section: editors
Installed-Size: 275
Maintainer: Debian Vim Maintainers <pkg-vim-maintainers@lists.alioth.debian.org>
Architecture: all
Source: vim
Version: 2:8.0.0197-4+deb9u1
Replaces: vim-gui-common (<< 2:7.4.488-4~)
Depends: xxd
Recommends: vim | vim-gtk | vim-gtk3 | vim-athena | vim-nox | vim-tiny
Breaks: vim-gui-common (<< 2:7.4.488-4~)
Conffiles:
 /etc/vim/vimrc 00311318b37b5b8a101c136ac1e78b0b
Description: Vi IMproved - Common files
 Vim is an almost compatible version of the UNIX editor Vi.
 .
 This package contains files shared by all non GUI-enabled vim variants
 available in Debian.  Examples of such shared files are: manpages and
 configuration files.
Homepage: http://www.vim.org/

Package: libsqlite3-0
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 734
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: armhf
Multi-Arch: same
Source: sqlite3
Version: 3.16.2-5+deb9u1
Depends: libc6 (>= 2.4)
Description: SQLite 3 shared library
 SQLite is a C library that implements an SQL database engine.
 Programs that link with the SQLite library can have SQL database
 access without running a separate RDBMS process.
Homepage: http://www.sqlite.org/

Package: sysv-rc
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 123
Maintainer: Debian sysvinit maintainers <pkg-sysvinit-devel@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Source: sysvinit
Version: 2.88dsf-59.9
Depends: debconf (>= 0.5) | debconf-2.0, sysvinit-utils (>= 2.86.ds1-62), insserv (>> 1.12.0-10), startpar
Pre-Depends: init-system-helpers (>= 1.25~)
Recommends: lsb-base (>= 3.2-14)
Suggests: bum
Breaks: systemd (<< 215)
Description: System-V-like runlevel change mechanism
 This package provides support for the System-V like system
 for booting, changing runlevels, and shutting down,
 configured through symbolic links in /etc/rc?.d/.
Homepage: http://savannah.nongnu.org/projects/sysvinit

Package: tasksel-data
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 213
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Architecture: all
Source: tasksel
Version: 3.39
Depends: tasksel (= 3.39)
Recommends: laptop-detect
Conflicts: tasksel (<< 2.67)
Description: official tasks used for installation of Debian systems
 This package contains data about the standard tasks available on a Debian
 system.

Package: apt
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 3148
Maintainer: APT Development Team <deity@lists.debian.org>
Architecture: armhf
Version: 1.4.8
Replaces: apt-utils (<< 1.3~exp2~)
Depends: adduser, gpgv | gpgv2 | gpgv1, debian-archive-keyring, init-system-helpers (>= 1.18~), libapt-pkg5.0 (>= 1.3~rc2), libc6 (>= 2.15), libgcc1 (>= 1:3.5), libstdc++6 (>= 5.2)
Recommends: gnupg | gnupg2 | gnupg1
Suggests: apt-doc, aptitude | synaptic | wajig, dpkg-dev (>= 1.17.2), powermgmt-base, python-apt
Breaks: apt-utils (<< 1.3~exp2~)
Conffiles:
 /etc/apt/apt.conf.d/01autoremove 0b1391c01d75f95fa4ea5ac01219b515
 /etc/cron.daily/apt-compat bc4a71cbcaeed4179f25d798257fa980
 /etc/kernel/postinst.d/apt-auto-removal 4ad976a68f045517cf4696cec7b8aa3a
 /etc/logrotate.d/apt 179f2ed4f85cbaca12fa3d69c2a4a1c3
Description: commandline package manager
 This package provides commandline tools for searching and
 managing as well as querying information about packages
 as a low-level access to all features of the libapt-pkg library.
 .
 These include:
  * apt-get for retrieval of packages and information about them
    from authenticated sources and for installation, upgrade and
    removal of packages together with their dependencies
  * apt-cache for querying available information about installed
    as well as installable packages
  * apt-cdrom to use removable media as a source for packages
  * apt-config as an interface to the configuration settings
  * apt-key as an interface to manage authentication keys

Package: liblocale-gettext-perl
Status: install ok installed
Priority: required
Section: perl
Installed-Size: 47
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: armhf
Source: liblocale-gettext-perl (1.07-3)
Version: 1.07-3+b1
Depends: libc6 (>= 2.4)
Pre-Depends: perl-base (>= 5.24.1~rc3-2), perlapi-5.24.1
Description: module using libc functions for internationalization in Perl
 The Locale::gettext module permits access from perl to the gettext() family of
 functions for retrieving message strings from databases constructed
 to internationalize software.
 .
 It provides gettext(), dgettext(), dcgettext(), textdomain(),
 bindtextdomain(), bind_textdomain_codeset(), ngettext(), dcngettext()
 and dngettext().
Homepage: https://metacpan.org/release/gettext

Package: dmsetup
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 201
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: foreign
Source: lvm2 (2.02.168-2)
Version: 2:1.02.137-2
Depends: libc6 (>= 2.8), libdevmapper1.02.1 (>= 2:1.02.131)
Description: Linux Kernel Device Mapper userspace library
 The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management)
 Team's implementation of a minimalistic kernel-space driver that handles
 volume management, while keeping knowledge of the underlying device layout
 in user-space.  This makes it useful for not only LVM, but software raid,
 and other drivers that create "virtual" block devices.
 .
 This package contains a utility for modifying device mappings.
Homepage: http://sources.redhat.com/lvm2/

Package: diffutils
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 1223
Maintainer: Santiago Vila <sanvila@debian.org>
Architecture: armhf
Version: 1:3.5-3
Replaces: diff
Pre-Depends: libc6 (>= 2.17)
Suggests: diffutils-doc, wdiff
Description: File comparison utilities
 The diffutils package provides the diff, diff3, sdiff, and cmp programs.
 .
 `diff' shows differences between two files, or each corresponding file
 in two directories.  `cmp' shows the offsets and line numbers where
 two files differ.  `cmp' can also show all the characters that
 differ between the two files, side by side.  `diff3' shows differences
 among three files.  `sdiff' merges two files interactively.
 .
 The set of differences produced by `diff' can be used to distribute
 updates to text files (such as program source code) to other people.
 This method is especially useful when the differences are small compared
 to the complete files.  Given `diff' output, the `patch' program can
 update, or "patch", a copy of the file.
Homepage: http://www.gnu.org/software/diffutils/

Package: man-db
Status: install ok installed
Priority: important
Section: doc
Installed-Size: 2034
Maintainer: Colin Watson <cjwatson@debian.org>
Architecture: armhf
Multi-Arch: foreign
Version: 2.7.6.1-2
Replaces: man, manpages-de (<< 0.5-4), manpages-zh (<< 1.5.2-1.1), nlsutils
Provides: man, man-browser
Depends: groff-base (>= 1.18.1.1-15), bsdmainutils, debconf (>= 1.2.0) | debconf-2.0, libc6 (>= 2.17), libgdbm3 (>= 1.8.3), libpipeline1 (>= 1.4.0), zlib1g (>= 1:1.1.4)
Pre-Depends: dpkg (>= 1.16.1~)
Suggests: groff, less, www-browser
Breaks: manpages-zh (<< 1.5.2-1.1)
Conflicts: man, suidmanager (<< 0.50)
Conffiles:
 /etc/cron.daily/man-db 66756dda467471df4f38b71a69a10393
 /etc/cron.weekly/man-db 40fa232bff2326e0f82837a360d0055f
 /etc/manpath.config 6945cded2bf5630e953a5a12aaca5232
Description: on-line manual pager
 This package provides the man command, the primary way of examining the
 on-line help files (manual pages). Other utilities provided include the
 whatis and apropos commands for searching the manual page database, the
 manpath utility for determining the manual page search path, and the
 maintenance utilities mandb, catman and zsoelim. man-db uses the groff
 suite of programs to format and display the manual pages.
Homepage: http://man-db.nongnu.org/

Package: libnfnetlink0
Status: install ok installed
Priority: extra
Section: libs
Installed-Size: 52
Maintainer: Alexander Wirt <formorer@debian.org>
Architecture: armhf
Multi-Arch: same
Source: libnfnetlink
Version: 1.0.1-3
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Description: Netfilter netlink library
 libnfnetlink is the low-level library for netfilter related
 kernel/userspace communication. It provides a generic messaging
 infrastructure for in-kernel netfilter subsystems (such as
 nfnetlink_log, nfnetlink_queue, nfnetlink_conntrack) and their
 respective users and/or management tools in userspace.

Package: pinentry-curses
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 82
Maintainer: Debian GnuPG Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>
Architecture: armhf
Source: pinentry
Version: 1.0.0-2
Provides: pinentry
Depends: libassuan0 (>= 2.0.1), libc6 (>= 2.4), libgpg-error0 (>= 1.14), libncursesw5 (>= 6), libtinfo5 (>= 6)
Suggests: pinentry-doc
Enhances: gnupg-agent
Description: curses-based PIN or pass-phrase entry dialog for GnuPG
 This package contains a program that allows for secure entry of PINs or
 pass phrases.  That means it tries to take care that the entered
 information is not swapped to disk or temporarily stored anywhere.
 This functionality is particularly useful for entering pass phrases
 when using encryption software such as GnuPG or e-mail clients using
 the same.  It uses an open protocol and is therefore not tied to
 particular software.
 .
 The program contained in this package implements a PIN entry dialog
 using the curses tool kit, meaning that it is useful for users
 working in text mode without the X Window System.  There are sibling
 packages that implement PIN entry dialogs that use an X tool kit.  If
 you install any of the graphical packages then this package is not
 necessary because the sibling packages automatically fall back to
 text mode if X is not active.
Homepage: https://www.gnupg.org/related_software/pinentry/

Package: libpam-modules
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 668
Maintainer: Steve Langasek <vorlon@debian.org>
Architecture: armhf
Multi-Arch: same
Source: pam
Version: 1.1.8-3.6
Replaces: libpam-umask, libpam0g-util
Provides: libpam-mkhomedir, libpam-motd, libpam-umask
Pre-Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.15), libdb5.3, libpam0g (>= 1.1.3-2), libselinux1 (>= 2.1.9), debconf (>= 0.5) | debconf-2.0, libpam-modules-bin (= 1.1.8-3.6)
Conflicts: libpam-mkhomedir, libpam-motd, libpam-umask
Conffiles:
 /etc/security/access.conf 13ec4d189f0ed9acf3433977a53d446b
 /etc/security/group.conf f1e26e8db6f7abd2d697d7dad3422c36
 /etc/security/limits.conf 11c27ba00b7bd6a255f33126f75c5005
 /etc/security/namespace.conf 6424c99a62ddf4b7d3ca713bb06ded89
 /etc/security/namespace.init d9e6a7c85e966427ef23a04ec6c7000f
 /etc/security/pam_env.conf ddee4a931170dc21b4e0b9bb28e02a7b
 /etc/security/sepermit.conf d41c74654734a5c069a37bfc02f0a6d4
 /etc/security/time.conf 06e05c6079e839c8833ac7c3abfde192
Description: Pluggable Authentication Modules for PAM
 This package completes the set of modules for PAM. It includes the
  pam_unix.so module as well as some specialty modules.
Homepage: http://www.linux-pam.org/

Package: insserv
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 127
Maintainer: Petter Reinholdtsen <pere@debian.org>
Architecture: armhf
Source: insserv (1.14.0-5.4)
Version: 1.14.0-5.4+b1
Depends: libc6 (>= 2.7)
Suggests: bootchart2
Breaks: sysv-rc (<< 2.87dsf-3)
Conffiles:
 /etc/insserv.conf b15785c0c4b022a3ba0edb78ba71297c
 /etc/bash_completion.d/insserv 32975fe14795d6fce1408d5fd22747fd obsolete
Description: boot sequence organizer using LSB init.d script dependency information
 The insserv program is used by the standard SysV-based init system. It
 updates the order of symlinks in /etc/rc?.d/ based on dependencies
 specified by LSB headers in the init.d scripts themselves.
 .
 These declared relations between scripts make it possible to optimize
 the boot sequence for the currently installed set of packages, while
 detecting and rejecting dependency loops.
 .
 Using insserv incorrectly can result in an unbootable system.
Homepage: http://savannah.nongnu.org/projects/sysvinit

Package: libstdc++6
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 1466
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: armhf
Multi-Arch: same
Source: gcc-6
Version: 6.3.0-18
Replaces: libstdc++6-6-dbg (<< 4.9.0-3)
Provides: libstdc++6-armhf
Depends: gcc-6-base (= 6.3.0-18), libc6 (>= 2.18), libgcc1 (>= 1:3.5)
Breaks: blockattack (<= 1.4.1+ds1-2.1+b2), boo (<= 0.9.5~git20110729.r1.202a430-2), c++-annotations (<= 10.2.0-1), clustalx (<= 2.1+lgpl-3), dff (<= 1.3.0+dfsg.1-4.1+b3), digikam-private-libs (<= 4:4.4.0-1.1+b2), emscripten (<= 1.22.1-1), ergo (<= 3.4.0-1), fceux (<= 2.2.2+dfsg0-1), fiona (<= 1.5.1-2), flush (<= 0.9.12-3.1), freeorion (<= 0.4.4+git20150327-2), fslview (<= 4.0.1-4), fwbuilder (<= 5.1.0-4), gcc-4.3 (<< 4.3.6-1), gcc-4.4 (<< 4.4.6-4), gcc-4.5 (<< 4.5.3-2), gnote (<= 3.16.2-1), gnudatalanguage (<= 0.9.5-2+b2), innoextract (<= 1.4-1+b1), libantlr-dev (<= 2.7.7+dfsg-6), libapache2-mod-passenger (<= 5.0.7-1), libaqsis1 (<= 1.8.2-1), libassimp3 (<= 3.0~dfsg-4), libboost-date-time1.54.0, libboost-date-time1.55.0, libchemps2-1 (<= 1.5-1), libcpprest2.4 (<= 2.4.0-2), libdap17 (<= 3.14.0-2), libdapclient6 (<= 3.14.0-2), libdapserver7 (<= 3.14.0-2), libdavix0 (<= 0.4.0-1+b1), libdballe6 (<= 6.8-1), libdiet-admin2.8 (<= 2.8.0-1+b3), libdiet-client2.8 (<= 2.8.0-1+b3), libdiet-sed2.8 (<= 2.8.0-1+b3), libfreefem++ (<= 3.37.1-1), libgazebo5 (<= 5.0.1+dfsg-2.1), libgetfem4++ (<= 4.2.1~beta1~svn4635~dfsg-3+b1), libgmsh2 (<= 2.9.3+dfsg1-1), libinsighttoolkit4.7 (<= 4.7.2-2), libkolabxml1 (<= 1.1.0-3), libmarisa0 (<= 0.2.4-8), libogre-1.8.0 (<= 1.8.0+dfsg1-7+b1), libogre-1.9.0 (<= 1.9.0+dfsg1-4), libopencv-core2.4, libopenmpi1.6, libopenwalnut1 (<= 1.4.0~rc1+hg3a3147463ee2-1+b1), libpqxx-4.0 (<= 4.0.1+dfsg-3), libreoffice-core (<= 1:4.4.5-2), librime1 (<= 1.2+dfsg-2), libsigc++-2.0-0c2a (<= 2.4.1-1+b1), libwibble-dev (<= 1.1-1), libwreport2 (<= 2.14-1), libxmltooling6 (<= 1.5.3-2.1), lightspark (<= 0.7.2+git20150512-2+b1), mira-assembler (<= 4.9.5-1), mongodb (<= 1:2.4.14-2), mongodb-server (<= 1:2.4.14-2), ncbi-blast+ (<= 2.2.30-4), openscad (<= 2014.03+dfsg-1+b1), passepartout (<= 0.7.1-1.1), pdf2djvu (<= 0.7.21-2), photoprint (<= 0.4.2~pre2-2.3+b2), plastimatch (<= 1.6.2+dfsg-1), plee-the-bear (<= 0.6.0-3.1), povray (<= 1:3.7.0.0-8), powertop (<= 2.6.1-1), printer-driver-brlaser (<= 3-3), psi4 (<= 4.0~beta5+dfsg-2+b1), python-fiona (<= 1.5.1-2), python-guiqwt (<= 2.3.1-1), python-healpy (<= 1.8.1-1+b1), python-htseq (<= 0.5.4p3-2), python-imposm (<= 2.5.0-3+b2), python-pysph (<= 0~20150606.gitfa26de9-5), python-rasterio (<= 0.24.0-1), python-scipy (<= 0.14.1-1), python-sfml (<= 2.2~git20150611.196c88+dfsg-1+b1), python3-fiona (<= 1.5.1-2), python3-scipy (<= 0.14.1-1), python3-sfml (<= 2.2~git20150611.196c88+dfsg-1+b1), python3-taglib (<= 0.3.6+dfsg-2+b2), realtimebattle (<= 1.0.8-14), ruby-passenger (<= 5.0.7-1), schroot (<= 1.6.10-1+b1), sqlitebrowser (<= 3.5.1-3), tecnoballz (<= 0.93.1-6), wesnoth-1.12-core (<= 1:1.12.4-1), widelands (<= 1:18-3+b1), xflr5 (<= 6.09.06-2)
Conflicts: scim (<< 1.4.2-1)
Description: GNU Standard C++ Library v3
 This package contains an additional runtime library for C++ programs
 built with the GNU compiler.
 .
 libstdc++-v3 is a complete rewrite from the previous libstdc++-v2, which
 was included up to g++-2.95. The first version of libstdc++-v3 appeared
 in g++-3.0.
Homepage: http://gcc.gnu.org/

Package: libkrb5-3
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 697
Maintainer: Sam Hartman <hartmans@debian.org>
Architecture: armhf
Multi-Arch: same
Source: krb5
Version: 1.15-1+deb9u1
Depends: libc6 (>= 2.16), libcomerr2 (>= 1.34), libk5crypto3 (>= 1.15~beta1), libkeyutils1 (>= 1.5.9), libkrb5support0 (= 1.15-1+deb9u1)
Recommends: krb5-locales
Suggests: krb5-doc, krb5-user
Breaks: libsmbclient (<= 2:3.6.1-2), sssd (<= 1.2.1-4.3)
Description: MIT Kerberos runtime libraries
 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service.  That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains the runtime library for the main Kerberos v5 API
 used by applications and Kerberos clients.
Homepage: http://web.mit.edu/kerberos/

Package: gcc-4.9-base
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 218
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: armhf
Multi-Arch: same
Source: gcc-4.9
Version: 4.9.2-10
Breaks: dehydra (<= 0.9.hg20110609-2), gcc-4.4-base (<< 4.4.7), gcc-4.7-base (<< 4.7.3), gcj-4.4-base (<< 4.4.6-9~), gcj-4.6-base (<< 4.6.1-4~), gnat-4.4-base (<< 4.4.6-3~), gnat-4.6 (<< 4.6.1-5~)
Description: GCC, the GNU Compiler Collection (base package)
 This package contains files common to all languages and libraries
 contained in the GNU Compiler Collection (GCC).
Homepage: http://gcc.gnu.org/

Package: libffi6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 43
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: armhf
Multi-Arch: same
Source: libffi
Version: 3.2.1-6
Depends: libc6 (>= 2.7), libgcc1 (>= 1:3.5)
Description: Foreign Function Interface library runtime
 A foreign function interface is the popular name for the interface that
 allows code written in one language to call code written in another
 language.

Package: libaudit-common
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 30
Maintainer: Laurent Bigonville <bigon@debian.org>
Architecture: all
Multi-Arch: foreign
Source: audit
Version: 1:2.6.7-2
Replaces: libaudit0, libaudit1 (<< 1:2.2.1-2)
Breaks: libaudit0, libaudit1 (<< 1:2.2.1-2)
Conffiles:
 /etc/libaudit.conf cdc703f9d27f0d980271a9e95d0f18b2
Description: Dynamic library for security auditing - common files
 The audit-libs package contains the dynamic libraries needed for
 applications to use the audit framework. It is used to monitor systems for
 security related events.
 .
 This package contains the libaudit.conf configuration file and the associated
 manpage.
Homepage: https://people.redhat.com/sgrubb/audit/

Package: libtext-charwidth-perl
Status: install ok installed
Priority: required
Section: perl
Installed-Size: 34
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: armhf
Source: libtext-charwidth-perl (0.04-7)
Version: 0.04-7+b6
Depends: libc6 (>= 2.4), perl-base (>= 5.24.1~rc3-2), perlapi-5.24.1
Description: get display widths of characters on the terminal
 This module permits perl software to get the display widths of characters
 and strings on the terminal, using wcwidth() and wcswidth() from libc.
 .
 It provides mbwidth(), mbswidth(), and mblen().
Homepage: http://search.cpan.org/search?module=Text::CharWidth

Package: exim4-daemon-light
Status: install ok installed
Priority: standard
Section: mail
Installed-Size: 891
Maintainer: Exim4 Maintainers <pkg-exim4-maintainers@lists.alioth.debian.org>
Architecture: armhf
Source: exim4
Version: 4.89-2+deb9u2
Replaces: exim4-base (<= 4.61-1), mail-transport-agent
Provides: default-mta, exim4-localscanapi-2.0, mail-transport-agent
Depends: exim4-base (>= 4.89), libc6 (>= 2.16), libdb5.3, libgnutls30 (>= 3.5.6), libpcre3, debconf (>= 0.5) | debconf-2.0
Conflicts: mail-transport-agent
Description: lightweight Exim MTA (v4) daemon
 Exim (v4) is a mail transport agent. This package contains the exim4
 daemon with only basic features enabled. It works well with the
 standard setups that are provided by Debian and includes support for
 TLS encryption and the dlopen patch to allow dynamic loading of a
 local_scan function.
 .
 The Debian exim4 packages have their own web page,
 http://wiki.debian.org/PkgExim4. There is also a Debian-specific
 FAQ list. Information about the way the Debian packages are
 configured can be found in
 /usr/share/doc/exim4-base/README.Debian.gz, which additionally contains
 information about the way the Debian binary packages are built. The
 very extensive upstream documentation is shipped in
 /usr/share/doc/exim4-base/spec.txt.gz. To repeat the debconf-driven
 configuration process in a standard setup, invoke dpkg-reconfigure
 exim4-config. There is a Debian-centered mailing list,
 pkg-exim4-users@lists.alioth.debian.org. Please ask Debian-specific
 questions there, and only write to the upstream exim-users mailing
 list if you are sure that your question is not Debian-specific. You
 can find the subscription web page on
 http://lists.alioth.debian.org/mailman/listinfo/pkg-exim4-users
Homepage: http://www.exim.org/

Package: libcomerr2
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 79
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Architecture: armhf
Multi-Arch: same
Source: e2fsprogs
Version: 1.43.4-2
Replaces: e2fsprogs (<< 1.34-1)
Provides: libcomerr-kth-compat
Depends: libc6 (>= 2.17)
Description: common error description library
 libcomerr is an attempt to present a common error-handling mechanism to
 manipulate the most common form of error code in a fashion that does not
 have the problems identified with mechanisms commonly in use.
Homepage: http://e2fsprogs.sourceforge.net

Package: findutils
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 1751
Maintainer: Andreas Metzler <ametzler@debian.org>
Architecture: armhf
Multi-Arch: foreign
Version: 4.6.0+git+20161106-2
Pre-Depends: libc6 (>= 2.17), libselinux1 (>= 1.32)
Suggests: mlocate | locate
Breaks: binstats (<< 1.08-8.1), debhelper (<< 9.20130504), guilt (<< 0.36-0.2), kernel-package (<< 13.000), libpython3.4-minimal (<< 3.4.4-2), libpython3.5-minimal (<< 3.5.1-3), lsat (<< 0.9.7.1-2.1), mc (<< 3:4.8.11-1), sendmail (<< 8.14.4-5), switchconf (<< 0.0.9-2.1)
Conflicts: debconf (<< 1.5.50)
Description: utilities for finding files--find, xargs
 GNU findutils provides utilities to find files meeting specified
 criteria and perform various actions on the files which are found.
 This package contains 'find' and 'xargs'; however, 'locate' has
 been split off into a separate package.
Homepage: http://savannah.gnu.org/projects/findutils/

Package: libpam0g
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 202
Maintainer: Steve Langasek <vorlon@debian.org>
Architecture: armhf
Multi-Arch: same
Source: pam
Version: 1.1.8-3.6
Replaces: libpam0g-util
Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.8), debconf (>= 0.5) | debconf-2.0
Suggests: libpam-doc
Description: Pluggable Authentication Modules library
 Contains the shared library for Linux-PAM, a library that enables the
 local system administrator to choose how applications authenticate users.
 In other words, without rewriting or recompiling a PAM-aware application,
 it is possible to switch between the authentication mechanism(s) it uses.
 One may entirely upgrade the local authentication system without touching
 the applications themselves.
Homepage: http://www.linux-pam.org/

Package: libxdmcp6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 44
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: armhf
Multi-Arch: same
Source: libxdmcp
Version: 1:1.1.2-3
Depends: libbsd0 (>= 0.2.0), libc6 (>= 2.4)
Description: X11 Display Manager Control Protocol library
 This package provides the main interface to the X11 display manager control
 protocol library, which allows for remote logins to display managers.
 .
 More information about X.Org can be found at:
 <URL:http://www.X.org>
 .
 This module can be found at
 git://anongit.freedesktop.org/git/xorg/lib/libXdmcp

Package: libcap-ng0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 34
Maintainer: Pierre Chifflier <pollux@debian.org>
Architecture: armhf
Multi-Arch: same
Source: libcap-ng (0.7.7-3)
Version: 0.7.7-3+b1
Depends: libc6 (>= 2.8)
Description: An alternate POSIX capabilities library
 This library implements the user-space interfaces to the POSIX
 1003.1e capabilities available in Linux kernels.  These capabilities are
 a partitioning of the all powerful root privilege into a set of distinct
 privileges.
 .
 The libcap-ng library is intended to make programming with POSIX
 capabilities much easier than the traditional libcap library.
 .
 This package contains header files and libraries for libcap-ng.
Homepage: http://people.redhat.com/sgrubb/libcap-ng

Package: dbus
Status: install ok installed
Priority: standard
Section: admin
Installed-Size: 415
Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: foreign
Version: 1.10.24-0+deb9u1
Depends: adduser, init-system-helpers (>= 1.3~), lsb-base (>= 3.2-14), libapparmor1 (>= 2.8.95), libaudit1 (>= 1:2.2.1), libc6 (>= 2.9), libcap-ng0, libdbus-1-3 (= 1.10.24-0+deb9u1), libexpat1 (>= 2.1~beta3), libselinux1 (>= 2.0.65), libsystemd0 (>= 209)
Suggests: default-dbus-session-bus | dbus-session-bus
Conffiles:
 /etc/default/dbus 0d0f25a2f993509c857eb262f6e22015
 /etc/init.d/dbus ec9a7d183ec50837a12aca3f9c95cc27
Description: simple interprocess messaging system (daemon and utilities)
 D-Bus is a message bus, used for sending messages between applications.
 Conceptually, it fits somewhere in between raw sockets and CORBA in
 terms of complexity.
 .
 D-Bus supports broadcast messages, asynchronous messages (thus
 decreasing latency), authentication, and more. It is designed to be
 low-overhead; messages are sent using a binary protocol, not using
 XML. D-Bus also supports a method call mapping for its messages, but
 it is not required; this makes using the system quite simple.
 .
 It comes with several bindings, including GLib, Python, Qt and Java.
 .
 This package contains the D-Bus daemon and related utilities.
 .
 The client-side library can be found in the libdbus-1-3 package, as it is no
 longer contained in this package.
Homepage: http://dbus.freedesktop.org/

Package: libmount1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 293
Maintainer: Debian util-linux Maintainers <ah-util-linux@debian.org>
Architecture: armhf
Multi-Arch: same
Source: util-linux
Version: 2.29.2-1
Depends: libblkid1 (>= 2.17.2), libc6 (>= 2.17), libselinux1 (>= 2.6-3~)
Description: device mounting library
 This device mounting library is used by mount and umount helpers.

Package: libkeyutils1
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 32
Maintainer: Christian Kastner <ckk@debian.org>
Architecture: armhf
Multi-Arch: same
Source: keyutils
Version: 1.5.9-9
Depends: libc6 (>= 2.7)
Description: Linux Key Management Utilities (library)
 Keyutils is a set of utilities for managing the key retention facility in the
 kernel, which can be used by filesystems, block devices and more to gain and
 retain the authorization and encryption keys required to perform secure
 operations.
 .
 This package provides a wrapper library for the key management facility system
 calls.
Homepage: http://people.redhat.com/~dhowells/keyutils/

Package: libnewt0.52
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 331
Maintainer: Alastair McKinstry <mckinstry@debian.org>
Architecture: armhf
Multi-Arch: same
Source: newt (0.52.19-1)
Version: 0.52.19-1+b1
Depends: libc6 (>= 2.15), libslang2 (>= 2.2.4)
Recommends: libfribidi0
Conffiles:
 /etc/newt/palette.original d41d8cd98f00b204e9800998ecf8427e
Description: Not Erik's Windowing Toolkit - text mode windowing with slang
 Newt is a windowing toolkit for text mode built from the slang library.
 It allows color text mode applications to easily use stackable windows,
 push buttons, check boxes, radio buttons, lists, entry fields, labels,
 and displayable text. Scrollbars are supported, and forms may be nested
 to provide extra functionality. This package contains the shared library
 for programs that have been built with newt.
Homepage: https://fedorahosted.org/newt/

Package: htop
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 152
Maintainer: Daniel Lange <dl.ml1@usrlocal.de>
Architecture: armhf
Version: 2.0.2-1
Depends: libc6 (>= 2.15), libncursesw5 (>= 6), libtinfo5 (>= 6)
Suggests: lsof, strace
Description: interactive processes viewer
 Htop is an ncursed-based process viewer similar to top, but it
 allows one to scroll the list vertically and horizontally to see
 all processes and their full command lines.
 .
 Tasks related to processes (killing, renicing) can be done without
 entering their PIDs.
Homepage: http://hisham.hm/htop/

Package: bsdmainutils
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 517
Maintainer: Debian Bsdmainutils Team <pkg-bsdmainutils@teams.debian.net>
Architecture: armhf
Multi-Arch: foreign
Version: 9.0.12+nmu1
Depends: libbsd0 (>= 0.2.0), libc6 (>= 2.4), libncurses5 (>= 6), libtinfo5 (>= 6), bsdutils (>= 3.0-0), debianutils (>= 1.8)
Suggests: cpp, wamerican | wordlist, whois, vacation
Breaks: bsdutils (<< 1:2.13-11)
Conffiles:
 /etc/calendar/default f499e79b0d2d685aa5ae7e1013940b96
 /etc/cron.daily/bsdmainutils 559387f792462a62e3efb1d573e38d11
 /etc/default/bsdmainutils bded239f4fea461cc5c92c3bd5a28cc9
Description: collection of more utilities from FreeBSD
 This package contains lots of small programs many people expect to find when
 they use a BSD-style Unix system.
 .
 It provides banner (as printerbanner), calendar, col, colcrt, colrm, column,
 from (as bsd-from), hexdump (or hd), look, lorder, ncal (or cal), ul, and
 write (as bsd-write).
 .
 This package used to contain whois and vacation, which are now distributed in
 their own packages. Also here was tsort, which is now in the "coreutils"
 package.

Package: libsasl2-modules
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 205
Maintainer: Debian Cyrus SASL Team <pkg-cyrus-sasl2-debian-devel@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: same
Source: cyrus-sasl2
Version: 2.1.27~101-g0780600+dfsg-3
Depends: libc6 (>= 2.4), libssl1.1 (>= 1.1.0)
Suggests: libsasl2-modules-gssapi-mit | libsasl2-modules-gssapi-heimdal, libsasl2-modules-ldap, libsasl2-modules-otp, libsasl2-modules-sql
Breaks: logcheck-database (<= 1.3.16~)
Conffiles:
 /etc/logcheck/ignore.d.server/libsasl2-modules c032d5205f090a30661ae9f82a03f36e
Description: Cyrus SASL - pluggable authentication modules
 This is the Cyrus SASL API implementation, version 2.1. See package
 libsasl2-2 and RFC 2222 for more information.
 .
 This package provides the following SASL modules: LOGIN, PLAIN, ANONYMOUS,
 NTLM, CRAM-MD5, and DIGEST-MD5 (with DES support).
Homepage: https://www.cyrusimap.org/

Package: login
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 2698
Maintainer: Shadow package maintainers <pkg-shadow-devel@lists.alioth.debian.org>
Architecture: armhf
Source: shadow
Version: 1:4.4-4.1
Replaces: manpages-de (<< 0.5-3), manpages-tr (<< 1.0.5), manpages-zh (<< 1.5.1-1)
Pre-Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.7), libpam0g (>= 0.99.7.1), libpam-runtime, libpam-modules (>= 1.1.8-1)
Conflicts: amavisd-new (<< 2.3.3-8), backupninja (<< 0.9.3-5), echolot (<< 2.1.8-4), gnunet (<< 0.7.0c-2), python-4suite (<< 0.99cvs20060405-1)
Conffiles:
 /etc/login.defs c92ea31d5ac50ae3e5d33d24f1e70983
 /etc/pam.d/login 1fd6cb4d4267a68148ee9973510a9d3e
 /etc/pam.d/su ce6dcfda3b190a27a455bb38a45ff34a
 /etc/securetty a7fc5292d9ae16f24d45f94fe88e001b
Description: system login tools
 These tools are required to be able to login and use your system. The
 login program invokes your user shell and enables command execution. The
 newgrp program is used to change your effective group ID (useful for
 workgroup type situations). The su program allows changing your effective
 user ID (useful being able to execute commands as another user).
Homepage: https://github.com/shadow-maint/shadow

Package: gnupg-agent
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 983
Maintainer: Debian GnuPG Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: foreign
Source: gnupg2
Version: 2.1.18-8~deb9u1
Provides: gpg-agent
Depends: pinentry-curses | pinentry, libassuan0 (>= 2.3.0), libc6 (>= 2.15), libgcrypt20 (>= 1.7.0), libgpg-error0 (>= 1.25), libnpth0 (>= 0.90), libreadline7 (>= 6.0)
Recommends: gnupg (= 2.1.18-8~deb9u1) | gpgsm
Suggests: dbus-user-session, libpam-systemd, pinentry-gnome3, scdaemon
Conffiles:
 /etc/X11/Xsession.d/90gpg-agent fbb9ce5e8e4ba5727090f0aa51b61a82
Description: GNU privacy guard - cryptographic agent
 GnuPG is GNU's tool for secure communication and data storage.
 It can be used to encrypt data and to create digital signatures.
 It includes an advanced key management facility and is compliant
 with the proposed OpenPGP Internet standard as described in RFC4880.
 .
 This package contains the agent program gpg-agent which handles all
 secret key material for OpenPGP and S/MIME use.  The agent also
 provides a passphrase cache, which is used by pre-2.1 versions of
 GnuPG for OpenPGP operations.
Homepage: https://www.gnupg.org/

Package: net-tools
Status: install ok installed
Priority: important
Section: net
Installed-Size: 778
Maintainer: net-tools Team <pkg-net-tools-maintainers@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: foreign
Version: 1.60+git20161116.90da8a0-1
Replaces: ja-trans (<= 0.8-2), netbase (<< 4.00)
Depends: libc6 (>= 2.4), libselinux1 (>= 1.32)
Conflicts: ja-trans (<= 0.8-2)
Description: NET-3 networking toolkit
 This package includes the important tools for controlling the network
 subsystem of the Linux kernel.  This includes arp, ifconfig, netstat,
 rarp, nameif and route.  Additionally, this package contains utilities
 relating to particular network hardware types (plipconfig, slattach,
 mii-tool) and advanced aspects of IP configuration (iptunnel, ipmaddr).
 .
 In the upstream package 'hostname' and friends are included. Those are
 not installed by this package, since there is a special "hostname*.deb".
Homepage: http://sourceforge.net/projects/net-tools/

Package: adduser
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 849
Maintainer: Debian Adduser Developers <adduser-devel@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 3.115
Depends: passwd, debconf (>= 0.5) | debconf-2.0
Suggests: liblocale-gettext-perl, perl
Conffiles:
 /etc/deluser.conf 773fb95e98a27947de4a95abb3d3f2a2
Description: add and remove users and groups
 This package includes the 'adduser' and 'deluser' commands for creating
 and removing users.
 .
  - 'adduser' creates new users and groups and adds existing users to
    existing groups;
  - 'deluser' removes users and groups and removes users from a given
    group.
 .
 Adding users with 'adduser' is much easier than adding them manually.
 Adduser will choose appropriate UID and GID values, create a home
 directory, copy skeletal user configuration, and automate setting
 initial values for the user's password, real name and so on.
 .
 Deluser can back up and remove users' home directories
 and mail spool or all the files they own on the system.
 .
 A custom script can be executed after each of the commands.
 .
  Development mailing list:
    http://lists.alioth.debian.org/mailman/listinfo/adduser-devel/
Homepage: http://alioth.debian.org/projects/adduser/

Package: initscripts
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 208
Maintainer: Debian sysvinit maintainers <pkg-sysvinit-devel@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: foreign
Source: sysvinit
Version: 2.88dsf-59.9
Depends: debianutils (>= 4), lsb-base (>= 3.2-14), sysvinit-utils (>= 2.88dsf-59.5), sysv-rc | file-rc | openrc, coreutils (>= 5.93)
Recommends: psmisc, e2fsprogs
Breaks: hurd (<< 0.5.git20131101~), ifupdown (<< 0.7.46), util-linux (<< 2.26.2-4~)
Conffiles:
 /etc/init.d/bootlogs 41ad826ad3091964c994b03177bbc29b
 /etc/init.d/bootmisc.sh 7e77260cb4071c21a99d581bfb8d2b74
 /etc/init.d/checkfs.sh fb72965ae6e43424c01b0d9d5b43d985
 /etc/init.d/checkroot.sh 74896125b097dfbfc0d0e15d2d04f20c
 /etc/init.d/checkroot-bootclean.sh 955dcf4da7378f9f981d3f04c94d36d7
 /etc/init.d/halt a0e668699f774d928ddc62954155adb5
 /etc/init.d/hostname.sh 2180072dbb4e2f42f7ad4df4a2f9888d
 /etc/init.d/killprocs 9866a64a5d3d34552b0c36f5667cdacd
 /etc/init.d/motd dbc3f882af04254005bb96e4f780e5a0
 /etc/init.d/mountall.sh c2afad03d303d1319aa87ccfa1eed0a5
 /etc/init.d/mountall-bootclean.sh 4c6b07a64798d8d78783e271238511f4
 /etc/init.d/mountnfs.sh a33d7b1a4d5043ea997af1f44c600cb9
 /etc/init.d/mountnfs-bootclean.sh 68aeda71fd9ae6861c3859c4ac33ee62
 /etc/init.d/mountdevsubfs.sh c18f4495f67dec33e257946215f54508
 /etc/init.d/mountkernfs.sh 12a99beb128e18bb6b277882233545af
 /etc/init.d/rc.local 7d505630f083ddc543cb68fbeb83a6b5
 /etc/init.d/reboot 39ce57bc053ad1bf9861347927d7db6b
 /etc/init.d/rmnologin eb11c47dd70b51a6e0d927f50490965e
 /etc/init.d/sendsigs 617e0ce4756cd2ac0c53634c4667fe22
 /etc/init.d/single bc7e38f0849ebfe767d162861fae002c
 /etc/init.d/umountfs b36788158390262195dd605b35cf5eee
 /etc/init.d/umountnfs.sh 5137d5524cdba56d07e61c1cd5bb7238
 /etc/init.d/umountroot 161f12bc211fd4e87030db54b97c13b2
 /etc/init.d/urandom e6454386bfce38efb5987dd06cb3b21d
 /etc/default/devpts fc857c5ac5fb84d80720ed4d1c624f6e
 /etc/default/halt 18d9844cf8ca8608e2a559a4555e593a
 /etc/default/rcS d52728f09e0a0e36f3be356559d0473c
 /etc/default/tmpfs 7287952acefcfb937d077579dd857c41
 /etc/network/if-up.d/mountnfs 528b2efd88285d2f443fcf54234b5156
Description: scripts for initializing and shutting down the system
 The scripts in this package initialize a standard Debian
 system at boot time and shut it down at halt or reboot time.
Homepage: http://savannah.nongnu.org/projects/sysvinit

Package: libnetfilter-acct1
Status: install ok installed
Priority: extra
Section: libs
Installed-Size: 45
Maintainer: Laurence J. Lane <ljlane@debian.org>
Architecture: armhf
Multi-Arch: same
Source: libnetfilter-acct
Version: 1.0.2-1.1
Depends: libc6 (>= 2.4), libmnl0 (>= 1.0.3-4~)
Pre-Depends: multiarch-support
Description: Netfilter acct library
 libnetfilter_acct is a userspace library providing an interface to the
 extended netfilter accounting infrastructure.
Homepage: http://www.netfilter.org/projects/libnetfilter_acct/

Package: libacl1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 49
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: armhf
Multi-Arch: same
Source: acl (2.2.52-3)
Version: 2.2.52-3+b1
Depends: libattr1 (>= 1:2.4.46-8), libc6 (>= 2.4)
Conflicts: acl (<< 2.0.0), libacl1-kerberos4kth
Description: Access control list shared library
 This package contains the libacl.so dynamic library containing
 the POSIX 1003.1e draft standard 17 functions for manipulating
 access control lists.
Homepage: http://savannah.nongnu.org/projects/acl/

Package: openssh-client
Status: install ok installed
Priority: standard
Section: net
Installed-Size: 3589
Maintainer: Debian OpenSSH Maintainers <debian-ssh@lists.debian.org>
Architecture: armhf
Multi-Arch: foreign
Source: openssh
Version: 1:7.4p1-10+deb9u2
Replaces: ssh, ssh-krb5
Provides: rsh-client, ssh-client
Depends: adduser (>= 3.10), dpkg (>= 1.7.0), passwd, libc6 (>= 2.17), libedit2 (>= 2.11-20080614), libgssapi-krb5-2 (>= 1.14+dfsg), libselinux1 (>= 1.32), libssl1.0.2 (>= 1.0.2d), zlib1g (>= 1:1.1.4)
Recommends: xauth
Suggests: keychain, libpam-ssh, monkeysphere, ssh-askpass
Conflicts: sftp
Conffiles:
 /etc/ssh/moduli fe5be9e1b2ad5c55132a3521ecaadcdd
 /etc/ssh/ssh_config d26206bb4490f72d051d2642c3bf03ee
Description: secure shell (SSH) client, for secure access to remote machines
 This is the portable version of OpenSSH, a free implementation of
 the Secure Shell protocol as specified by the IETF secsh working
 group.
 .
 Ssh (Secure Shell) is a program for logging into a remote machine
 and for executing commands on a remote machine.
 It provides secure encrypted communications between two untrusted
 hosts over an insecure network. X11 connections and arbitrary TCP/IP
 ports can also be forwarded over the secure channel.
 It can be used to provide applications with a secure communication
 channel.
 .
 This package provides the ssh, scp and sftp clients, the ssh-agent
 and ssh-add programs to make public key authentication more convenient,
 and the ssh-keygen, ssh-keyscan, ssh-copy-id and ssh-argv0 utilities.
 .
 In some countries it may be illegal to use any encryption at all
 without a special permit.
 .
 ssh replaces the insecure rsh, rcp and rlogin programs, which are
 obsolete for most purposes.
Homepage: http://www.openssh.com/

Package: ncurses-bin
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 481
Maintainer: Craig Small <csmall@debian.org>
Architecture: armhf
Multi-Arch: foreign
Source: ncurses
Version: 6.0+20161126-1+deb9u1
Pre-Depends: libc6 (>= 2.4), libtinfo5 (>= 6.0+20151017), libtinfo5 (<< 6.1~)
Description: terminal-related programs and man pages
 The ncurses library routines are a terminal-independent method of
 updating character screens with reasonable optimization.
 .
 This package contains the programs used for manipulating the terminfo
 database and individual terminfo entries, as well as some programs for
 resetting terminals and such.
Homepage: http://invisible-island.net/ncurses/

Package: dirmngr
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 820
Maintainer: Debian GnuPG Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>
Architecture: armhf
Source: gnupg2
Version: 2.1.18-8~deb9u1
Replaces: gnupg2 (<< 2.1.10-2)
Depends: adduser, lsb-base (>= 3.2-13), libassuan0 (>= 2.4.0), libc6 (>= 2.15), libgcrypt20 (>= 1.7.0), libgnutls30 (>= 3.5.6), libgpg-error0 (>= 1.21), libksba8 (>= 1.3.4), libldap-2.4-2 (>= 2.4.7), libnpth0 (>= 0.90)
Recommends: gnupg (= 2.1.18-8~deb9u1)
Suggests: dbus-user-session, libpam-systemd, pinentry-gnome3, tor
Breaks: gnupg2 (<< 2.1.10-2)
Enhances: gnupg, gpgsm, squid
Description: GNU privacy guard - network certificate management service
 dirmngr is a server for managing and downloading OpenPGP and X.509
 certificates, as well as updates and status signals related to those
 certificates.  For OpenPGP, this means pulling from the public
 HKP/HKPS keyservers, or from LDAP servers.  For X.509 this includes
 Certificate Revocation Lists (CRLs) and Online Certificate Status
 Protocol updates (OCSP).  It is capable of using tor for network
 access.
 .
 dirmngr is used for network access by gpg, gpgsm, and dirmngr-client,
 among other tools.
Homepage: https://www.gnupg.org/

Package: acl
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 177
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: armhf
Multi-Arch: foreign
Source: acl (2.2.52-3)
Version: 2.2.52-3+b1
Depends: libacl1 (= 2.2.52-3+b1), libattr1 (>= 1:2.4.46-8), libc6 (>= 2.4)
Description: Access control list utilities
 This package contains the getfacl and setfacl utilities needed for
 manipulating access control lists.
Homepage: http://savannah.nongnu.org/projects/acl/

Package: libslang2
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 1101
Maintainer: Alastair McKinstry <mckinstry@debian.org>
Architecture: armhf
Multi-Arch: same
Source: slang2
Version: 2.3.1-5
Depends: libc6 (>= 2.4)
Description: S-Lang programming library - runtime version
 S-Lang is a C programmer's library that includes routines for the rapid
 development of sophisticated, user friendly, multi-platform applications.
 .
 This package contains only the shared library libslang.so.* and copyright
 information. It is only necessary for programs that use this library (such
 as jed and slrn). If you plan on doing development with S-Lang, you will
 need the companion -dev package as well.
Built-Using: unicode-data (= 9.0-1)
Homepage: http://www.jedsoft.org/slang/

Package: cron
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 221
Maintainer: Javier Fernández-Sanguino Peña <jfs@debian.org>
Architecture: armhf
Source: cron (3.0pl1-128)
Version: 3.0pl1-128+b1
Provides: cron-daemon
Depends: libc6 (>= 2.7), libpam0g (>= 0.99.7.1), libselinux1 (>= 1.32), init-system-helpers (>= 1.18~), debianutils (>= 1.7), adduser, lsb-base (>= 3.0-10), libpam-runtime (>= 1.0.1-11)
Pre-Depends: dpkg (>= 1.15.7.2)
Recommends: exim4 | postfix | mail-transport-agent
Suggests: anacron (>= 2.0-1), logrotate, checksecurity
Breaks: dpkg (<< 1.15.4)
Conffiles:
 /etc/cron.d/.placeholder e5e12910bf011222160404d7bdb824f2
 /etc/cron.daily/.placeholder e5e12910bf011222160404d7bdb824f2
 /etc/cron.hourly/.placeholder e5e12910bf011222160404d7bdb824f2
 /etc/cron.monthly/.placeholder e5e12910bf011222160404d7bdb824f2
 /etc/cron.weekly/.placeholder e5e12910bf011222160404d7bdb824f2
 /etc/crontab 8f111d100ea459f68d333d63a8ef2205
 /etc/default/cron eae0d979b5007d2af41540d8c2631359
 /etc/init.d/cron 85d7a3783889ea93dcda2fb488420c1c
 /etc/pam.d/cron 11e788a7f7cd5477b10da2c7fd5ecdf0
Description: process scheduling daemon
 The cron daemon is a background process that runs particular programs at
 particular times (for example, every minute, day, week, or month), as
 specified in a crontab. By default, users may also create crontabs of
 their own so that processes are run on their behalf.
 .
 Output from the commands is usually mailed to the system administrator
 (or to the user in question); you should probably install a mail system
 as well so that you can receive these messages.
 .
 This cron package does not provide any system maintenance tasks. Basic
 periodic maintenance tasks are provided by other packages, such
 as checksecurity.
Homepage: http://ftp.isc.org/isc/cron/

Package: libmnl0
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 38
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: armhf
Multi-Arch: same
Source: libmnl
Version: 1.0.4-2
Depends: libc6 (>= 2.4)
Description: minimalistic Netlink communication library
 libmnl is a minimalistic user-space library oriented to Netlink developers.
 There are a lot of common tasks in parsing, validating, constructing of
 both the Netlink header and TLVs that are repetitive and easy to get wrong.
 This library aims to provide simple helpers that allows you to re-use code
 and to avoid re-inventing the wheel.
 .
 The main features of this library are:
 .
 Small: the shared library requires around 30KB for an x86-based computer.
 .
 Simple: this library avoids complexity and elaborated abstractions that
 tend to hide Netlink details.
 .
 Easy to use: the library simplifies the work for Netlink-wise developers.
 It provides functions to make socket handling, message building,
 validating, parsing and sequence tracking, easier.
 .
 Easy to re-use: you can use the library to build your own abstraction
 layer on top of this library.
 .
 Decoupling: the interdependency of the main bricks that compose the
 library is reduced, i.e. the library provides many helpers, but the
 programmer is not forced to use them.
 .
 This package contains the shared libraries needed to run programs that use
 the minimalistic Netlink communication library.
Homepage: http://netfilter.org/projects/libmnl/

Package: libassuan0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 77
Maintainer: Debian GnuPG-Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: same
Source: libassuan
Version: 2.4.3-2
Depends: libc6 (>= 2.4), libgpg-error0 (>= 1.14)
Description: IPC library for the GnuPG components
 Libassuan is a small library implementing the so-called "Assuan
 protocol". This protocol is used for IPC between most newer GnuPG
 components. Both server and client side functions are provided.
Homepage: https://www.gnupg.org/related_software/libassuan/index.html

Package: libapt-pkg4.12
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 2175
Maintainer: APT Development Team <deity@lists.debian.org>
Architecture: armhf
Multi-Arch: same
Source: apt
Version: 1.0.9.8.3
Depends: libbz2-1.0, libc6 (>= 2.15), libgcc1 (>= 1:4.4.0), liblzma5 (>= 5.1.1alpha+20120614), libstdc++6 (>= 4.9), zlib1g (>= 1:1.2.3.4)
Pre-Depends: multiarch-support
Breaks: apt (<< 0.9.4~), libapt-inst1.5 (<< 0.9.9~)
Description: package management runtime library
 This library provides the common functionality for searching and
 managing packages as well as information about packages.
 Higher-level package managers can depend upon this library.
 .
 This includes:
  * retrieval of information about packages from multiple sources
  * retrieval of packages and all dependent packages
    needed to satisfy a request either through an internal
    solver or by interfacing with an external one
  * authenticating the sources and validating the retrieved data
  * installation and removal of packages in the system
  * providing different transports to retrieve data over cdrom, ftp,
    http, rsh as well as an interface to add more transports like
    https (apt-transport-https) and debtorrent (apt-transport-debtorrent).

Package: libxcb1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 218
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: armhf
Multi-Arch: same
Source: libxcb
Version: 1.12-1
Depends: libc6 (>= 2.4), libxau6, libxdmcp6
Breaks: alsa-utils (<< 1.0.24.2-5)
Description: X C Binding
 This package contains the library files needed to run software using libxcb,
 the X C Binding.
 .
 The XCB library provides an interface to the X Window System protocol,
 designed to replace the Xlib interface.  XCB provides several advantages over
 Xlib:
 .
  * Size: small library and lower memory footprint
  * Latency hiding: batch several requests and wait for the replies later
  * Direct protocol access: one-to-one mapping between interface and protocol
  * Thread support: access XCB from multiple threads, with no explicit locking
  * Easy creation of new extensions: automatically generates interface from
    machine-parsable protocol descriptions
Homepage: http://xcb.freedesktop.org

Package: libusb-0.1-4
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 48
Maintainer: Aurelien Jarno <aurel32@debian.org>
Architecture: armhf
Multi-Arch: same
Source: libusb
Version: 2:0.1.12-30
Replaces: libusb-dev (<< 2:0.1.12-25)
Depends: libc6 (>= 2.15)
Description: userspace USB programming library
 Library for programming USB applications without the knowledge
 of Linux kernel internals.
 .
 This package contains what you need to run programs that use this
 library.
Homepage: http://www.linux-usb.org/

Package: locales
Status: install ok installed
Priority: standard
Section: localization
Installed-Size: 9244
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Architecture: all
Source: glibc
Version: 2.24-11+deb9u1
Replaces: manpages-fr-extra (<< 20141022)
Depends: libc-bin (>> 2.24), libc-l10n (>> 2.24), debconf (>= 0.5) | debconf-2.0
Conffiles:
 /etc/locale.alias 53e10994fabc5169907e413b792785dd
Description: GNU C Library: National Language (locale) data [support]
 Machine-readable data files, shared objects and programs used by the
 C library for localization (l10n) and internationalization (i18n) support.
 .
 This package contains tools to generate locale definitions from source
 files (included in this package). It allows you to customize which
 definitions actually get generated. This is a space-saver over how this
 package used to be, with all locales generated by default. This created
 a package that unpacked to an excess of 30 megs.
Homepage: http://www.gnu.org/software/libc/libc.html

Package: traceroute
Status: install ok installed
Priority: important
Section: net
Installed-Size: 121
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: armhf
Version: 1:2.1.0-2
Depends: libc6 (>= 2.4)
Description: Traces the route taken by packets over an IPv4/IPv6 network
 The traceroute utility displays the route used by IP packets on their way to a
 specified network (or Internet) host. Traceroute displays the IP number and
 host name (if possible) of the machines along the route taken by the packets.
 Traceroute is used as a network debugging tool. If you're having network
 connectivity problems, traceroute will show you where the trouble is coming
 from along the route.
 .
 Install traceroute if you need a tool for diagnosing network connectivity
 problems.
Homepage: http://traceroute.sourceforge.net/

Package: logrotate
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 111
Maintainer: Paul Martin <pm@debian.org>
Architecture: armhf
Version: 3.11.0-0.1
Depends: libacl1 (>= 2.2.51-8), libc6 (>= 2.8), libpopt0 (>= 1.14), libselinux1 (>= 1.32), cron | anacron | cron-daemon, base-passwd (>= 2.0.3.4)
Recommends: bsd-mailx | mailx
Breaks: postgresql-common (<= 126)
Conffiles:
 /etc/cron.daily/logrotate d2281ecb6f898b446ac8a5984ab5a243
 /etc/logrotate.conf 176edd439a499501372cf3d04e795810
Description: Log rotation utility
 The logrotate utility is designed to simplify the administration of
 log files on a system which generates a lot of log files.  Logrotate
 allows for the automatic rotation compression, removal and mailing of
 log files.  Logrotate can be set to handle a log file daily, weekly,
 monthly or when the log file gets to a certain size.  Normally, logrotate
 runs as a daily cron job.
Homepage: https://github.com/logrotate/logrotate

Package: libsepol1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 417
Maintainer: Debian SELinux maintainers <selinux-devel@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: same
Source: libsepol
Version: 2.6-2
Depends: libc6 (>= 2.8)
Description: SELinux library for manipulating binary security policies
 Security-enhanced Linux is a patch of the Linux kernel and a number
 of utilities with enhanced security functionality designed to add
 mandatory access controls to Linux.  The Security-enhanced Linux
 kernel contains new architectural components originally developed to
 improve the security of the Flask operating system. These
 architectural components provide general support for the enforcement
 of many kinds of mandatory access control policies, including those
 based on the concepts of Type Enforcement®, Role-based Access
 Control, and Multi-level Security.
 .
 libsepol provides an API for the manipulation of SELinux binary policies.
 It is used by checkpolicy (the policy compiler) and similar tools, as well
 as by programs like load_policy that need to perform specific transformations
 on binary policies such as customizing policy boolean settings.
Homepage: http://userspace.selinuxproject.org/

Package: libx11-data
Status: install ok installed
Priority: optional
Section: x11
Installed-Size: 1665
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Source: libx11
Version: 2:1.6.4-3
Breaks: libx11-6 (<< 2:1.4.1)
Description: X11 client-side library
 This package provides the locale data files for libx11.
 .
 More information about X.Org can be found at:
 <URL:https://www.X.org>
 .
 This module can be found at
 git://anongit.freedesktop.org/git/xorg/lib/libX11

Package: libxau6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 56
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Architecture: armhf
Multi-Arch: same
Source: libxau
Version: 1:1.0.8-1
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Description: X11 authorisation library
 This package provides the main interface to the X11 authorisation handling,
 which controls authorisation for X connections, both client-side and
 server-side.
 .
 More information about X.Org can be found at:
 <URL:http://www.X.org>
 .
 This module can be found at
 git://anongit.freedesktop.org/git/xorg/lib/libXau

Package: libidn11
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 289
Maintainer: Debian Libidn Team <help-libidn@gnu.org>
Architecture: armhf
Multi-Arch: same
Source: libidn
Version: 1.33-1
Replaces: libidn11-dev
Depends: libc6 (>= 2.4)
Conflicts: libidn9-dev
Description: GNU Libidn library, implementation of IETF IDN specifications
 GNU Libidn is a fully documented implementation of the Stringprep,
 Punycode and IDNA specifications.  Libidn's purpose is to encode and
 decode internationalized domain names.  The Nameprep, XMPP, SASLprep,
 and iSCSI profiles are supported.
 .
 This package contains the shared library.
Homepage: https://www.gnu.org/software/libidn/

Package: rsyslog
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 1127
Maintainer: Michael Biebl <biebl@debian.org>
Architecture: armhf
Version: 8.24.0-1
Provides: linux-kernel-log-daemon, system-log-daemon
Depends: libc6 (>= 2.17), libestr0 (>= 0.1.4), libfastjson4 (>= 0.99.3), liblogging-stdlog0 (>= 1.0.2), liblognorm5 (>= 1.1.2), libsystemd0 (>= 209), libuuid1 (>= 2.16), zlib1g (>= 1:1.1.4), init-system-helpers (>= 1.47~), lsb-base (>= 3.2-14)
Recommends: logrotate
Suggests: rsyslog-mysql | rsyslog-pgsql, rsyslog-mongodb, rsyslog-doc, rsyslog-gnutls, rsyslog-gssapi, rsyslog-relp
Conflicts: linux-kernel-log-daemon, system-log-daemon
Conffiles:
 /etc/default/rsyslog c7af23c348917e877399baea1849727a
 /etc/init.d/rsyslog 08213cf202f2552298f62a007487e01c
 /etc/logcheck/ignore.d.server/rsyslog 650507df599fbbdd6cb4142bd77fd2ff
 /etc/logrotate.d/rsyslog b995d89ccfe4a83ac3ffc5ab95b80f7b
 /etc/rsyslog.conf 5a9fe60ec2ef27265b8ca19c286a545f
Description: reliable system and kernel logging daemon
 Rsyslog is a multi-threaded implementation of syslogd (a system utility
 providing support for message logging), with features that include:
  * reliable syslog over TCP, SSL/TLS and RELP
  * on-demand disk buffering
  * email alerting
  * writing to MySQL or PostgreSQL databases (via separate output plugins)
  * permitted sender lists
  * filtering on any part of the syslog message
  * on-the-wire message compression
  * fine-grained output format control
  * failover to backup destinations
  * enterprise-class encrypted syslog relaying
 .
 It is the default syslogd on Debian systems.
Homepage: http://www.rsyslog.com/

Package: libdbus-1-3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 323
Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: same
Source: dbus
Version: 1.10.24-0+deb9u1
Depends: libc6 (>= 2.17), libsystemd0 (>= 209)
Recommends: dbus
Breaks: dbus (<< 1.9.16-1~)
Description: simple interprocess messaging system (library)
 D-Bus is a message bus, used for sending messages between applications.
 Conceptually, it fits somewhere in between raw sockets and CORBA in
 terms of complexity.
 .
 D-Bus supports broadcast messages, asynchronous messages (thus
 decreasing latency), authentication, and more. It is designed to be
 low-overhead; messages are sent using a binary protocol, not using
 XML. D-Bus also supports a method call mapping for its messages, but
 it is not required; this makes using the system quite simple.
 .
 It comes with several bindings, including GLib, Python, Qt and Java.
 .
 The daemon can be found in the dbus package.
Homepage: http://dbus.freedesktop.org/

Package: libip6tc0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 101
Maintainer: Arturo Borrero Gonzalez <arturo@debian.org>
Architecture: armhf
Multi-Arch: same
Source: iptables
Version: 1.6.0+snapshot20161117-6
Depends: libc6 (>= 2.4)
Description: netfilter libip6tc library
 The user-space iptables (IPv6) C library from the Netfilter xtables framework.
 .
 iptables IPv6 ruleset ADT and kernel interface.
 .
 This library has been considered private for years (and still is), in the
 sense of changing symbols and backward compatibility not guaranteed.
Homepage: http://www.netfilter.org/

Package: libgcc1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 149
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: armhf
Multi-Arch: same
Source: gcc-6 (6.3.0-18)
Version: 1:6.3.0-18
Provides: libgcc1-armhf
Depends: gcc-6-base (= 6.3.0-18), libc6 (>= 2.4)
Breaks: gcc-4.3 (<< 4.3.6-1), gcc-4.4 (<< 4.4.6-4), gcc-4.5 (<< 4.5.3-2)
Description: GCC support library
 Shared version of the support library, a library of internal subroutines
 that GCC uses to overcome shortcomings of particular machines, or
 special needs for some languages.
Homepage: http://gcc.gnu.org/

Package: libreadline6
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 287
Maintainer: Matthias Klose <doko@debian.org>
Architecture: armhf
Multi-Arch: same
Source: readline6 (6.3-8)
Version: 6.3-8+b3
Depends: readline-common, libc6 (>= 2.15), libtinfo5
Pre-Depends: multiarch-support
Description: GNU readline and history libraries, run-time libraries
 The GNU readline library aids in the consistency of user interface
 across discrete programs that need to provide a command line
 interface.
 .
 The GNU history library provides a consistent user interface for
 recalling lines of previously typed input.

Package: util-linux
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 2620
Maintainer: Debian util-linux Maintainers <ah-util-linux@debian.org>
Architecture: armhf
Multi-Arch: foreign
Version: 2.29.2-1
Replaces: bash-completion (<< 1:2.1-4.1~), initscripts (<< 2.88dsf-59.2~), mount (= 2.26.2-3), mount (= 2.26.2-3ubuntu1), sysvinit-utils (<< 2.88dsf-59.1~)
Pre-Depends: libblkid1 (>= 2.25), libc6 (>= 2.15), libfdisk1 (>= 2.29~rc2), libmount1 (>= 2.25), libncursesw5 (>= 6), libpam0g (>= 0.99.7.1), libselinux1 (>= 2.6-3~), libsmartcols1 (>= 2.28~rc1), libsystemd0, libtinfo5 (>= 6), libudev1 (>= 183), libuuid1 (>= 2.16), zlib1g (>= 1:1.1.4)
Suggests: dosfstools, kbd | console-tools, util-linux-locales
Breaks: bash-completion (<< 1:2.1-4.1~), cloud-utils (<< 0.27-1~), grml-debootstrap (<< 0.68), mount (= 2.26.2-3), mount (= 2.26.2-3ubuntu1), sysvinit-utils (<< 2.88dsf-59.4~)
Conffiles:
 /etc/default/hwclock 3916544450533eca69131f894db0ca12
 /etc/init.d/hwclock.sh 1ca5c0743fa797ffa364db95bb8d8d8e
 /etc/pam.d/runuser b8b44b045259525e0fae9e38fdb2aeeb
 /etc/pam.d/runuser-l 2106ea05877e8913f34b2c77fa02be45
Description: miscellaneous system utilities
 This package contains a number of important utilities, most of which
 are oriented towards maintenance of your system. Some of the more
 important utilities included in this package allow you to partition
 your hard disk, view kernel messages, and create new filesystems.

Package: libustr-1.0-1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 150
Maintainer: Vaclav Ovsik <vaclav.ovsik@i.cz>
Architecture: armhf
Multi-Arch: same
Source: ustr
Version: 1.0.4-6
Depends: libc6 (>= 2.4)
Description: Micro string library: shared library
 ustr (Micro string library) is a string API for C. It has tiny overhead over
 just plain strdup(), is much safer, is easier to use, is faster for many
 operations, can be used with read-only or automatically allocated data. You
 don't even need to link to the library to use it (so there are no
 dependencies).
 .
 This package contains the shared library.
Homepage: http://www.and.org/ustr/

Package: liblzo2-2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 110
Maintainer: Peter Eisentraut <petere@debian.org>
Architecture: armhf
Multi-Arch: same
Source: lzo2 (2.08-1.2)
Version: 2.08-1.2+b2
Depends: libc6 (>= 2.4)
Description: data compression library
 LZO is a portable, lossless data compression library.
 It offers pretty fast compression and very fast decompression.
 Decompression requires no memory.  In addition there are slower
 compression levels achieving a quite competitive compression ratio
 while still decompressing at this very high speed.
Homepage: http://www.oberhumer.com/opensource/lzo/

Package: tasksel
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 374
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Architecture: all
Version: 3.39
Depends: debconf (>= 0.5) | debconf-2.0, liblocale-gettext-perl, apt, tasksel-data, perl-base (>= 5.14.0-1)
Pre-Depends: debconf (>= 1.5.34) | cdebconf (>= 0.106)
Conflicts: base-config (<< 2.32), debconf (<< 1.4.27)
Description: tool for selecting tasks for installation on Debian systems
 This package provides 'tasksel', a simple interface for users who
 want to configure their system to perform a specific task.

Package: libjson-c2
Status: install ok installed
Priority: extra
Section: libs
Installed-Size: 75
Maintainer: fabien boucher <fabien.dot.boucher@gmail.com>
Architecture: armhf
Multi-Arch: same
Source: json-c
Version: 0.11-4
Depends: libc6 (>= 2.8)
Pre-Depends: multiarch-support
Description: JSON manipulation library - shared library
 This library allows you to easily construct JSON objects in C,
 output them as JSON formatted strings and parse JSON formatted
 strings back into the C representation of JSON objects.
Homepage: https://github.com/json-c/json-c/wiki

Package: libwrap0
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 91
Maintainer: Marco d'Itri <md@linux.it>
Architecture: armhf
Multi-Arch: same
Source: tcp-wrappers
Version: 7.6.q-26
Replaces: tcpd (<< 7.6.q-20)
Depends: libc6 (>= 2.11)
Recommends: tcpd
Breaks: tcpd (<< 7.6.q-20)
Description: Wietse Venema's TCP wrappers library
 Wietse Venema's network logger, also known as TCPD or LOG_TCP.
 .
 These programs log the client host name of incoming telnet,
 ftp, rsh, rlogin, finger etc. requests.
 .
 Security options are:
  - access control per host, domain and/or service;
  - detection of host name spoofing or host address spoofing;
  - booby traps to implement an early-warning system.

Package: libicu52
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 25835
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: armhf
Multi-Arch: same
Source: icu
Version: 52.1-8+deb8u3
Depends: libc6 (>= 2.7), libgcc1 (>= 1:4.4.0), libstdc++6 (>= 4.9)
Pre-Depends: multiarch-support
Description: International Components for Unicode
 ICU is a C++ and C library that provides robust and full-featured
 Unicode and locale support.  This package contains the runtime
 libraries for ICU.
Homepage: http://www.icu-project.org

Package: sed
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 762
Maintainer: Clint Adams <clint@debian.org>
Architecture: armhf
Multi-Arch: foreign
Version: 4.4-1
Pre-Depends: libc6 (>= 2.7), libselinux1 (>= 1.32)
Description: GNU stream editor for filtering/transforming text
 sed reads the specified files or the standard input if no
 files are specified, makes editing changes according to a
 list of commands, and writes the results to the standard
 output.
Homepage: https://www.gnu.org/software/sed/

Package: libsmartcols1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 191
Maintainer: Debian util-linux Maintainers <ah-util-linux@debian.org>
Architecture: armhf
Multi-Arch: same
Source: util-linux
Version: 2.29.2-1
Depends: libc6 (>= 2.17)
Description: smart column output alignment library
 This smart column output alignment library is used by fdisk utilities.

Package: libcryptsetup4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 163
Maintainer: Debian Cryptsetup Team <pkg-cryptsetup-devel@lists.alioth.debian.org>
Architecture: armhf
Multi-Arch: same
Source: cryptsetup
Version: 2:1.7.3-4
Depends: libc6 (>= 2.17), libdevmapper1.02.1 (>= 2:1.02.97), libgcrypt20 (>= 1.7.0), libuuid1 (>= 2.16), libgpg-error0 (>= 1.10-0.1)
Description: disk encryption support - shared library
 Cryptsetup provides an interface for configuring encryption on block
 devices (such as /home or swap partitions), using the Linux kernel
 device mapper target dm-crypt. It features integrated Linux Unified Key
 Setup (LUKS) support.
 .
 This package provides the libcryptsetup shared library.
Homepage: https://gitlab.com/cryptsetup/cryptsetup

Package: netbase
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 44
Maintainer: Marco d'Itri <md@linux.it>
Architecture: all
Multi-Arch: foreign
Version: 5.4
Conffiles:
 /etc/protocols bb9c019d6524e913fd72441d58b68216
 /etc/rpc f0b6f6352bf886623adc04183120f83b
 /etc/services 567c100888518c1163b3462993de7d47
Description: Basic TCP/IP networking system
 This package provides the necessary infrastructure for basic TCP/IP based
 networking.

